Philips MCD139B Owner's Manual

warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dea ...

Philips MCD139B ➜The menu bar will appear across the top of the TV screen. 2 Select icon and press 4. ➜Playback will pause. 3 Press à / á / 4 / 3 keys on the remote control to navigate in the menu. ➜Move to , and press á. ➜Move to “OSD LANG” , and press á. 4 Select your desired language and press OK. To ...

Philips MCD139B equipment Recording (digital) Connect the system’s COAXIAL OUT (digital out) jack to the DIGITAL IN jack on a digital recording device (DTS-Digital Theater System compatible, with a Dolby Digital decoder, for example). Before operation, set COAXIAL OUTPUT according to the audio connection. ANTENNA ...

Philips MCD139B Español --------------------------------------------- 76 Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Commun ...

Philips MCD139B The Clock/Timer setting is erased. The remote control does not function. Low hum or buzz sound. Low bass response. Unable to select Progressive Scan ✔ Set the clock correctly. ✔ Power has been interrupted or the power cord has been disconnected. Reset the clock/timer. ✔ Select the correct source (DISC or AUX for exa ...

Philips MCD139B complete the connection procedures. – When the system is switched to Standby mode, it is still consuming power.To disconnect the system from the power supply completely, reomve the AC power plug from the wall socket. Switching the system on/off ● In standby/Eco-power standby mode, ...

Philips MCD139B PHILIPS LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: PHILIPS warranty obligation is limited to the terms set forth below. WHO IS COVERED: Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materi- als and workmanship as based on the ...

Philips MCD139B remote control repeatedly to display various disc playback time on the TV screen ( and the system’s display). For DVDs: TITLE ELAPSED - elapsed playback time of current title TITLE REMAIN - remaining time of current title CHAPTER ELAPSED - elapsed playback time of ...

Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: – This device may not cause harmful interference, and – This device must accept any interference received, including interference that may cause undesired operation. Features Your DVD MICRO THEATRE System with 2.1- chann ...

Philips MCD139B IMPORTANT! – If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. ANTENNA FM (75Ω) ●Use the ...

Philips MCD139B mode. To view the clock in any source mode (DISC or TUNER for example), or Eco- power standby mode ● Press briefly CLOCK on the remote. ● Press and hold MODE for more than 5 seconds to toggle between 12-hour and 24-hour display. ➜The clock is displayed for a few seco ...

Philips MCD139B ●Use the component video cables (red/blue/ green, not supplied) to connect the system’s PR/ PB/ Y jacks to the corresponding Component video input jacks (or labeled as Pr/Cr Pb/Cb Y or YUV) on the TV set. ●To listen to TV channels through this system, use the audio cables (white/red, not supplied) to c ...