Teac HS-2 Technical Information

TOTAL PROJECT No. RETURN This is the return command in response to the command “TOTAL PROJECT No. SENSE [7F025E].” It returns the total number of projects. Command FF Category Code 02 Sub Command DE Machine ID 0 Data 4 bytes Description Remarks Data 5 Tens digit of the total number of projects Data 6 Ones digit ...

Teac HS-2 List of commands A list of commands is given below. Control/Preset/Sense Command Return Command 0F INFORMATION REQUEST 8F INFORMATION RETURN 10 STOP 12 PLAY 13 RECORD 14 PAUSE 15 JOG 16 SHUTTLE 17 FLASH LOAD 97 FLASH LOAD ACKNOWLEDGE 19 FLASH START 1A TRACK (TAKE) SKIP 1D CALL 20 AUTO CUE LEVEL PRESET A0 AUTO CUE LE ...

Teac HS-2 CLOCK DATA RETURN This is the return command in respond to the command “CLOCK DATA PRESET [27].” It returns the currently specified date and time values. Command A7 Machine ID 0 Data 12 bytes Description Remarks Data 1 Tens digit of the year Data 2 Ones digit of the year Data 3 Tens digit of the month Data 4 One ...

Teac HS-2 DEVICE SELECT Selects the current slot. A return command is returned only if Sense [FF] is specified. Command 7F Category Code 01 Machine ID 0 Parameter 2 bytes Data 3 Data 4 Description Remarks 0 0 SLOT 1 Selects SLOT 1 as the current slot. 0 1 SLOT 2 Selects SLOT 2 as the current slot. F F Sense Requests that the ...

PLAY MODE RETURN This is the return command in response to the command “PLAY MODE SENSE [4E].” It returns the current Play mode. Command CE Machine ID 0 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 All Take Play all takes in the current folder 0 1 One Take Plays the current take only Request/Preset PLAY MO ...

Teac HS-2 List of vender commands A list of vender commands (Command 7F / FF) is given below. Command codes are a combination of command (2 bytes), category code (2 bytes) and sub command (2 bytes). For detailed information, see page 24 and following. Control/Sense Command Return Command 7F01 DEVICE SELECT FF01 DEVICE SELECT ...

Teac HS-2 3. Command format Command format overview The command format is as follows. Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 … Byte n LF ID Command Data 1 Data 2 Data 3 Data 4 … CR Commands begin with a “line feed (LF),” end with a “carriage return (CR),” and are based on the ASCII format. The typ ...

Teac HS-2 Command details The commands, data, and machine IDs described here are characters (ASCII). A command is two character bytes, a machine ID is one character byte, and each item of data is an individual character byte. The HS-8 can use the following take numbers, folder numbers, and project numbers. However, if a numbe ...

Teac HS-2 RS-232C Protocol Specification Ver. 1.10a August 2010 TEAC Corporation ...

Teac HS-2 AUTO CUE SELECT Turns on or off the Auto Cue function of the controlled device. A return command is returned only if Sense [FF] is specified. The Auto Cue Level setting is made using the command “AUTO CUE LEVEL PRESET [20].” Command 30 Machine ID 0 Data 2 bytes Data 1 Data 2 Description Remarks 0 0 Auto Cue Off ...

Teac HS-2 TITLE RETURN This is the return command in response to the command “TITLE SENSE [59].” It returns the specified take name. If no name has been written for the take, or if the written name uses non-ASCII characters, the command “ILLEGAL SENSE REQUEST [F2]” is returned. Command D9 Machine ID 0 Data none Data 5 ...