Minolta magicolor 2210 Operation & User’s Manual

Squeeze the retainers, move the guides to the appropriate location (media sizes are listed on the tray), and release the retainers. The media should fit easily between the guides. 4 Load the paper face-up, short edge toward the right of the tray. Often, an arrow on the media p ...

71 Data was sent to the printer, but it doesn’t print. An error message is displayed in the message window. Handle according to the message displayed. The transfer belt installation guide is not set correctly in the installation rail. Remove the transfer belt. Place the front end of the intermediate transfer unit installation guide ( ...

Minolta magicolor 2210 Identify product %%IncludeFeature: product Control line wrap %%IncludeFeature: autowrap Specify default paper size %%IncludeFeature: paper_size Control transformation point %%IncludeFeature: paper_size_override Adjust image horizontally %%IncludeFeature: xorigin Adjust image vertically %%IncludeFeature: yorigin Set power ...

10 Toner Cartridge Replacement 1 Check the message display to see what toner color is out. 2 Open the printer’s front cover. Attention Be careful not to spill toner on the inside of the printer’s front cover. Toner will fall from there into the upper media tray. If toner does fall onto the open cover, immediately wipe it with a ...

Minolta magicolor 2210 78 Part of image is missing. The media is moist from humidity. Remove the moist media and replace it with new, dry media. Media with specifications not covered by the printer warranty is being used. Use media that is covered by the printer warranty. One or more of the toner cartridges is defective. Remove the toner cart ...

Minolta magicolor 2210 Introduction 34 Media Handling 34 Media Types 35 Plain Paper 35 Letterhead and Memo Media 35 Thick Stock 36 Envelopes 37 Labels 37 Postcards 38 Transparencies 38 Loading Media 40 Autoduplexing 40 Upper and Optional Media Trays 41 M ...

Minolta magicolor 2210 every 12 months, or as needed, whichever comes earlier. Always test any cleaning solution (such as a mild detergent) on a small area of your printer to check the solution’s performance Outside the Printer Inside the Printer Use Avoid A soft dry cloth to clean the c ...

Minolta magicolor 2210 132 9 With another person’s help, lift the printer. When lifting and carrying the printer, use the pull-out carrying bars c and the hand grips d. 10 Slowly lower the printer onto the lower feeder unit, lining up the four holes in the bottom of the printer with the corresponding pins in the lower feeder unit. 11 Place bracket L on the left ...

Minolta magicolor 2210 56 Attention The image is not fixed on the media before the fusing process. If you touch the printed surface, the toner may stick to your hands, so be careful not to touch the print face when removing the jammed media. Make sure not to spill any toner inside the printer. Unfused toner can dirty your hands, clothes, or anything else it get ...

Minolta magicolor 2210 Multipurpose tray Capacity Up to 50 sheets, depending on the thickness of the transparencies If you have problems feeding 50 sheets, try load- ing only 5–10 sheets at a time. Loading a large number of transparencies at a time may cause static buildup, thus causing feeding problems. Orientation Upper an ...