Minolta Pi3505e Service Manual

not installed, or the 3rd and 4th paper drawers cannot be selected from the paper source options on the Device Options Setting tab. Check that the additional paper feed units are installed, and check the selected settings on the Device Options Setting tab. In order t ...

Mode Factory Setting 465 7 6 5 4 3 2 1 0 Bit: 0 0 1 0 0 0 1 1 HEX:23 Bit Feature Logic Description 0 1 7 – 0 Select RAW port number (first 8 bits) Bit 7-0: 00000000 Do not specify these settings. Most significant bit for mode 464 00000001 1 00100011 9100 ...

Minolta Pi3505e *2: Outside North America Note: Features marked with asterisks can be specified by the user. ✽ indicates screen settings. Mode Factory Setting 446 7 6 5 4 3 2 1 0 Bit: 0 0 1 1 1 1 0 0 HEX:3C Bit Feature Logic Description 0 1 7 – 0 Select # of lines to set when using PC printer function ✽ Bit 7-0: 00000101 5 00111100*1 60 01 ...

Minolta Pi3505e fied. The optional finisher is not installed, or the finisher is not selected on the Device Options Set- ting tab. Check that the fin- isher is installed, and check the selected settings on the Device Options Setting tab. In order to specify sta- pling, the optional fin- isher must be installed. In addition, stapling canno ...

Minolta Pi3505e *2: North America Note: Features marked with asterisks can be specified by the user. ✽ indicates screen settings. Mode Factory Setting 440 7 6 5 4 3 2 1 0 Bit: 0 0 0 1 0 0 1 0 HEX:12 Bit Feature Logic Description 0 1 7 – 6 PDL set ✽ Bit 7-6: 00 Auto 01 PCL 10 PS 11 Other 5 – 1 Paper size set ✽ Bit 5-1:: 00000 A3 ...

Minolta Pi3505e Network settings can be made either from the copier control panel or through PageScope Light used on a network PC. Use of PageScope Light allows detailed settings that cannot be made from the copier control panel to be made. To use PageScope Light, it is necessary to first set the IP address for the controller by following t ...

There are blank pages in the print data. Remove the blank pages from the print data, or select the appro- priate copier or printer driver set- ting that does not output blank pages. (Depend- ing on the data for- mat, blank pages may not be output- ted.) 6 When the document is reduced, the print result differs from the docu- men ...

network interface) 1. With the Di3510f, Di3010f, Di2510f and Di2010f, disconnect the Ni-MH battery cable from CN3 on the MFB3 circuit board (in order to prevent dam- age to the memory IC). NOTE Disconnect the Ni-MH battery cable from CN3 on the MFB3 circuit board to stop power from being ...

• A part marked with the symbol shown on the left and other parts such as the exposure lamp and fusing roller can be very hot while the machine is ener- gized. Touching them may result in a burn. • Wait until these parts have cooled down before replacing them or any sur- rounding parts. 9. ...

Mode Factory Setting 441 7 6 5 4 3 2 1 0 Bit: 1 0 0 0 0 0 0 0 HEX:80 Bit Feature Logic Description 0 1 7 – 4 Select a paper feeder cassette to use when using PC printer function ✽ Bit 7-4: 0000 1st drawer 0001 2nd drawer 0010 3rd drawer 0011 4th drawer 1 ...