Moog Minitaur Operation & User’s Manual

CHECK THE CONTENTS IN THE SHIPPING CARTON The Minitaur is shipped with the following items: 1. The Minitaur Analog Bass Synthesizer 2. A 12VDC Power Adaptor 3. A “Getting Started” guide 4. Registration Card 5. Earplugs WHAT YOU WILL NEED 1. A MIDI keyboard or MIDI controller 2. A MIDI cable 3. A USB cable to connect the Minitaur ...

Moog Minitaur tion of musically-expressive sounds. The Minitaur’s MODULATION section provides an LFO with adjustable RATE and AMOUNT controls for the oscillators (VCO) and the Filter (VCF). The Low Frequency Oscillator (LFO) is a signal used to move the pitch of VCOs and the Filter Cutoff up and down automatically. A LFO can ...

3(MSB) 35(LSB) 0-127 0-127 0-127 0-63(INT) 64-127(MIDI CLOCK) See table on page 24 0-63(OFF) 64-127(ON) 0-63(SAW) 64-127(SQR) 0-63(SAW) 64-127(SQR) 0-63(OFF) 64-127(ON) 0-63(OFF) 64-127(ON) 0-42(LCR) 43-84(LCT) 85-127(EXP) 0-63(Alway ...

Moog Minitaur EG AMOUNT (CC# 22): Determines how much the Filter Envelope Generator (EG) adds to or subtracts from the Filter Cutoff control setting. When the EG AMOUNT knob is set to positive (+), turn the FILTER CUTOFF knob left to hear the effect. When the EG AMOUNT knob is set to negative (-), turn the FILTER CUTOFF knob right to hear the effe ...

Moog Minitaur Octave Low-Pass Filter design with resonance. It has controls for CUTOFF frequency which determines the range of frequencies the filter will affect, as VCO 2 LVL (CC# 16): Sets the level of VCO 2. MIDI ACCESSIBLE CONTROL EXTERNAL INPUT LEVEL (CC# 27): Adjusts the External Audio Input level. By default, the level is set for ...