Pitney Bowes 3500 Setup Manual

6. Attach the Box panel to the bottom chassis, and then attach Blind label to the position shown in the illustration below. Attach the four Angle plates. Blind label Box panel 7. Attach the Internet Fax chassis to the rear cover. 6 ...

Internet Communication Illustration..……………………………….Page One Installing the Internet Board (Part # (6429769)……………………Page Two Installing the Internet Board (Part # (6429769) to a machine which has the PCL Option (6429760) installed. (AC Adapter 6429770 required for I’F Kit when PCL Kit is installed)� ...

Pitney Bowes 3500 Connect the connection cable from the IN connector on the 2nd Phone Line board to the OUT connector on the Internet Fax board. Then secure the Internet Fax board using three screws. 5. Attach the four Angle plates. 6. Attach the module cover of the Internet F ...

Pitney Bowes 3500 ID Label 12 Connect the DC cable to the DC jack. Connect the Ethernet cable to the Internet Fax network port. Attach the ID label to the bottom chassis. 8 ...

Pitney Bowes 3500 Attaching the Internet Fax Board to a machine which has the PCL Option (# 6429760) installed. (AC Adapter 6429770 needed for I/F Kit when PCL Kit is installed) Note: Make sure to turn off the fax machine before proceeding with the following steps. 1. Remove the REAR COVER, and then remove the SHIELD PLATE. 2. Di ...

Pitney Bowes 3500 For the total system to work properly via LAN, certain information must be set in advance. Please contact the network administrator for the necessary information. Internet Parameters IP Address Subnet Mask SMTP Server Name or IP Address Default Gateway IP Address E-Mail Address DNS Server IP Address POP Server IP Address POP ...

10 Attach the module cover. INT. EXT. 9 Connect the connection cable of the Internet Fax to IN connector on the Internet Fax board. Connect the PCL connection cable to OUT connector on the Internet Fax board. Then attach the Internet Fax board to the chassis using three screws ...

Pitney Bowes 3500 Attaching the Internet Fax Kit to the machine which has installed an PCL Option (# 6429760) and a Second Line Option (# 6429764). Note: Make sure to turn off the fax machine before proceeding the following steps. 1. Remove the module cover of the 2nd phone line. 2. Disconnect the connection ...

Pitney Bowes 3500 8.Connect the DC cable to the DC jack. Connect the Ethernet cable to the Internet Fax Kits network port. Attach the ID label to the bottom chassis. 11 ...

Subnet Mask - The net mask used to manage sub-segments of the network. Once a packet has arrived at an organization's gateway or connection point with its unique network number, it can be routed within the organization's internal gateways using the subnet numbe ...