Cisco SPA 303 Quick Start Manual

Welcome Thank you for choosing the Cisco Small Business IP phone. This guide describes how to install your phone and how to perform some basic tasks. 1 Installing Your IP Phone Use this procedure to install the phone and connect it to your network. Do not insert a telephone line cord into the port marked “AUX.” Ste ...

Cisco SPA 303 above. 6 Navigation Button Press an arrow to scroll left, right, up, or down through items shown on the LCD screen. # Phone Feature Description 7 Messages Button Press to access voice mail (must be set up by your phone system administrator). 8 Hold Button Pr ...

Cisco SPA 303 Trouble? • Check Ethernet Cable Connection is in the network port on the phone body marked “SW” and in the correct device port, such as a network switch, on your network. • Verify power supply is connected correctly. • To reboot the phone, use the keypad and press the ...

From left to right: Redial - displays list of last numbers dialed. Dir - displays directory options. CFWD - launches call forward feature (you will need to enter forwarding number). Dnd – turns do not disturb feature on /off. Paging Pick up your handset. Dial 825 or press the paging softkey (if applicable). Speak into the phone ...

Cisco SPA 303 other end of the power cord into the phone base. Step 5. Connect your phone to the network using an Ethernet Connection. Insert one end of the Ethernet cable into the network port on the phone body marked “SW.” Insert the other end of t ...