BayTech TX102 Owner's Manual

unit, the local Telplex will first prompt you to enter the desired unit number and module number of the remote Telplex. The module number will be "1" for a remote TX102, TX104, TX108, or TX4. The module number will be 1 to 8 for a remote TX28 or 1 to 16 for a remote TX60. 5.1 5.1 MAIN CON ...

BLOCK SIZE, PORT LOCAL ACCESS AND STATUS MESSAGES AND STATUS MESSAGES By responding to the Enter Request: message at the end of the main configuration menu (see Section 5.1.1) for either type of unit with "3" (Block Size, Port Local Access, and Status Messages), you may review the current status of the Block Size, ...

BayTech TX102 ACCESS MODEM COMMAND MODE NOTE: This section does not apply to standard units. If you type "6" (Access Local Modem) from the Telplex System Menu (see Section 4.3.1), the Telplex will respond with the following: COMMUNICATING WITH MODEM Type Ctrl U to Send String 1 Type Ctrl V to Send String 2 Type Ctrl X to exit t ...

BayTech TX102 will send the following message: Local Mode Currently Being Accessed by another Port 4.3.2 4.3.2 LOCAL UNIT AND REMOTE UNIT LOCAL UNIT AND REMOTE UNIT CONFIGURATION MODE CONFIGURATION MODE Local and Remote Unit Configuration mode are used to program the various features of the lo ...