Datalogic Controller SC6000 Reference Manual

When working in a redundant system, the SC6000 displays different windows according to its redundancy role (refer to the SC6000 Help On-Line for further details). SC6000 Active Controller Window The SC6000 working as active controller displays the diagnostic mask window, as if it is working in a single master network. ...

57 A A ALTERNATIVE CONNECTIONS REFERENCE POWER SUPPLY - I/O (POWER/NET CONNECTOR) The PWO supplies 24 VDC. 25-pin D-Sub Female Connector Pinout Pin Name Function 1 REL1 Relay output control 14 1 25 13 25-pin Male D-sub Connector 2 REL3 Relay output control 3 GND Ground 4 GND Ground 5 ENCODER A Encoder (Tach) 6 PS_AUX A Pres ...

Datalogic Controller SC6000 the Lonworks Slave Common Parameters branch in the Reading System Layout folder. Figure 39 – Common Slave Scanner Code Selection Configuration 7) Configure the SC6000 parameters according to your application using the various configuration folders. The main ste ...

Datalogic Controller SC6000 The SC6000 Controller is available in versions that differ in regard to the following characteristics: 200 = Standard 211 = Profibus 215 = DeviceNet 230 = Dual Ethernet SC6000 - 1XXX 1.3 LED INDICATORS Figure 1 – LEDs Description 1 Power ON and Communication LEDs 2 Status LEDs System Signal LEDs Name Color State Function Po ...