Toshiba e-Studio3511 Operator's Manual

1 Press the [JOB STATUS] button on the control panel. 2 Press the [FAX] button. 3 Select the file that is currently being transmitted. - Check that the status column indicates “Line1” (transmitting via line 1) or “Line2” (transmitting via line 2). 4 Press the [DELETE] button. 5 When “Delete ...

Toshiba e-Studio3511 - Press the [Prev] or [Next] button to switch the screens. - The highlighted buttons in the screens on the right are the default settings. 5 Press the [ENTER] button to complete the setting. 6 Specify the remote Fax and press the [START] button. - When one remote Fax is specified by the address book ("Address Book Entry" P ...

Toshiba e-Studio3511 5 4 Press the [ADVANCED] button to enter the advanced menu, and then press the [ITU MAILBOX] button. 5 Press the [CONFIDENTIAL] or [BULLETIN BD.] button, then the [INPUT] button. 6 Press the [ENTER] button. - If the type of selected box is not opened, “No entry” appears. 7 Press the [BOX NUMBER ...

Toshiba e-Studio3511 6.SENDING ORIGINALS (Cont.) 2 Direct Transmission In the Direct Transmission mode, the remote Fax is immediately dialed, and the originals are sent after a successful connection with the remote Fax that has been completed. - Users can check immediately if the original has been sent to the remote Fax. - Once scanned, the originals are not s ...

Toshiba e-Studio3511 Reception Only (24HR) ...........................137, 139 Reception Only (TIMER) .........................137, 139 RECEPTION SETTINGS .................................. 53 RECEPTION TROUBLE ................................. 152 Recovery Transmission ..................................... 22 ...