Toshiba e-Studio3511 Service Handbook

3 - 7 e-STUDIO3511/4511 ADJUSTMENT [Procedure to key in adjustment values] In accordance with the procedure described below, make adjustment of each adjustment item so that the measured values obtained from test copies satisfy the specification. By pressing the [FAX] button, immediately after starting the Adjustment Mode (05), ...

Toshiba e-Studio3511 5 - 123 e-STUDIO3511/4511 TROUBLESHOOTING Cause/Section Scanner Main charger Cleaner Transfer unit Fuser unit Drum Laser optical unit Step 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Check items Is there foreign matter in the optical path? Is there dust or stain on the shading correction plate or ADF original glass? Is there ...

Toshiba e-Studio3511 November 2003 © TOSHIBA TEC 3.2 Adjustment of the Auto-Toner Sensor When the developer material is replaced, adjust the auto-toner sensor in the following procedure. (1) Install the cleaner and developer unit. Note: Do not install the toner cartridge. (2) While pressing [0] and [5] simultaneously, turn the power ON. Th ...

Toshiba e-Studio3511 4 - 18 November 2003 © TOSHIBA TEC Outside Inside Developer frame (Nozzle mixer) Grease Oil seal Fig. 4-211 *f1. Main charger case / Main charger wire Clean the main charger case and wire with a cloth soaked in water and squeezed tightly, and then wipe them with a dry cloth. Note: Be careful of the following when ...