AAT S-max Manuals

Stand 03_2008 1 = handle unit 2 = column 3 = turning gear 4 = locking knob on the column 5 = power unit 6 = running wheels 7 = locking bolt on the turning device This turning device is for the most part already prepared to be mounted by the manufacturer. Should this not be the case, please attach the turning device as follows: 1. Open the locking bolt on the column and remove the handle unit. 2. Slide the turning device upward on the column until it locks at the upper locking point (1). Attention: the turning device must be in this position any time you are climbing up or down stairs! 3. Now put the handle unit with the attached turning device back onto the power unit and lock the column with the locking knob. Make sure that the locking knob is tight. 4. As soon as the handle unit is well attached to the power unit and the turning device is locked in the upper position, you may turn on the s-max. Press the Up/Down switch, direction “up”, until the running wheels are approximately 2-3 cm in the air. 1 2 1 2 3 4 5 7 6 6 Operator’s manual Turning device s-max

Trans la ti on of the ori gi nal user’s ma nu al Stair Clim bing Sys tem S-max GB

Translation of the original user’s manual Stair Climbing System S-max GB