AAT S-max Operator's Manual

2 = column 3 = turning gear 4 = locking knob on the column 5 = power unit 6 = running wheels 7 = locking bolt on the turning device This turning device is for the most part already prepared to be mounted by the manufacturer. Should this not be the case, please attach the turning device as follows: 1. Open the locking bolt on the ...

AAT Alber Antriebstechnik GmbH Ehestetter Weg 11 · 72458 Albstadt Tel.: +49.74 31.12 95-0 · Fax: 12 95-35 www.aat-online.de · [email protected] Operator’s manual 5. Pull the locking bolt of the turning device outward and push it downward until it catches the lower position (2), see picture 3 and 6. 6. Push the Up/D ...