ABB REL-300 Manuals

3 pdf manual(s) ABB REL-300 for free download (Document Types: Instruction manual, Instruction leaflet)

ABB REL-300 Instruction manual [PDF] (125 pages)

  • Identifier: id-2009917
  • Brand: ABB
  • Device: REL-300 Protection Device
  • Type: PDF
  • Key Aspects: Documentation and Revision History, Technical Support and Resource Links, Hardware Setup Instructions
  • UPD Date: 03.09.2026
  • Source File: 2277941.pdf
  • Pages: 125
  • Description: Advanced user manual for the ABB REL-300.
Pages Preview:
  • MDAR REVISION NOTICE CHANGE SUMMARY: A CHANGE BAR ( ) LOCATED IN THE MARGIN REPRESENTS A TECHNICAL CHANGE TO THE PRODUCT. A STAR (*) LOCATED BY THE SUB NUMBER REPRESENTS A TECHNICAL CHANGE TO THE DRAWING. DATE REV. LEVEL PAGES REMOVED PAGES INSERTED 11/95 Released
  • I.L. 40-385.6 i Significant Changes to Version 2.62 (From V2.60) 1. Corrected the display for 1-a ct style. Now, the angles of currents will be blocked only if the magnitudes of currents are below 10% of ct rating. 2. Used JMP-3 to perform the following functions. a) If JMP-3 = OUT, the 150 ms timer for LOPB maintains the same as V2.60, e.g., the LOPB will not block the distance units if a fault is detected within 150 ms after LOP = 1. b) If JMP-3 = IN, ch
  • I.L. 40-385.5 ii 1. Standard precautions of static voltage discharges should be observed such as using a grounded wrist strap when handling Integrated Circuits. 2. Remove chips U103 and U104 from the Microprocessor module. 3. Replace chips U103 (G13) and U104 (G14) into the sockets. 4. Reprogram MDAR password through INCOM remote communication. 5. It is recommended to verify the relay’s operation per Section 2 of Appendix A2 (Acceptance/ Maintenance T
  • I.L. 40-385.6 iii It is recommended that the user of MDAR equipment become acquainted with the information in this instruction leaflet before energizing the system. Failure to do so may result in injury to personnel or damage to the equip- ment, and may affect the equipment warranty. If the MDAR relay system is mounted in a cabinet, the cabinet must be bolted to the floor, or otherwise secured before MDAR installation, to prevent the system from tipping ov
  • I.L. 40-385.5 iv Table of Contents PAGE NO. Section 1 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Section 2 FUNCTIONAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Section 3 SYSTEM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Section 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Section 5 DE
Document Preview & Text Transcription (Main Page)
Click to expand and read text
NUMERICAL DISTANCE PROTECTION MDAR (REL-300) RELAYING SYSTEMS ABB Power T&D Company Inc. Relay Division Coral Springs, FL 33065 4300 Coral Ridge Drive January 1996 Instruction Manual 40-385.5 V2.62 O (954) 752-6700 O (800) 523-2620 O

ABB REL-300 Instruction leaflet [PDF] (135 pages)

  • Identifier: id-1301847
  • Brand: ABB
  • Device: REL-300 Relays
  • Type: PDF
  • Key Aspects: Hardware Verification Checklists, Control Panel and Interface Navigation, System Connectivity and Wiring Basics
  • UPD Date: 17.05.2026
  • Source File: 1285854.pdf
  • Pages: 135
  • Description: Operation and maintenance manual for the ABB REL-300.
Pages Preview:
  • MDAR REVISION NOTICE CHANGE SUMMARY: A CHANGE BAR ( | ) LOCATED IN THE MARGIN REPRESENTS A TECHNICAL CHANGE TO THE PRODUCT. DATE REV LEVEL PAGES REMOVED PAGES INSERTED 11/91 A v, vi, 1-2, 1-5, 3-2, 3-4, 3-5, 3-7, 3-9, SAME 3-10, 3-11, 3-14, 3-15, 4-3, 4-4, 4-11, 4-17, 5-1, 5-3, 5-5, 5-6, A-1, A-6, G-8, H-1, H-2, H-5, H-9 1/01/92 A 3-1, H-2, H-7 SAME 1/15/92 A vi, 3-29, J-1, J-2, J-3, J-4, J-5, J-6 SAME 5/92 B 3-2, 3-19, 3-20, 3-21, 3-23, 3-26, 3-2, 3-19,
  • I.L. 40-385.1B (5/92) i It is recommended that the user of MDAR equipment become acquainted with the information in this instruction leaflet before energizing the system. Failure to do so may result in injury to personnel or damage to the equip- ment, and may affect the equipment warranty. If the MDAR relay system is mounted in a cabinet, the cabinet must be bolted to the floor, or otherwise secured before MDAR installation, to prevent the system from tipp
  • I.L. 40-385.1B ii (5/92) PREFACE Scope This manual describes the functions and features of the MDAR Relay System. It is intended primarily for use by engineers and technicians involved in the installation, testing, operation and maintenance of the MDAR system. Equipment Identification The MDAR equipment is identified by the Catalog Number on the MDAR chassis nameplate. The Catalog Num- ber can be decoded by using Catalog Number Table 3-1 (see Section 3). P
  • I.L. 40-385.1B (5/92) iii Features Included in Version V2.00 The following features are standard for the Non-Pilot MDAR V2.00: • 3-Zone distance phase and ground relay, with re- versible Zone 3 phase and ground; 4 impedance units per zone: 3 phase-to-ground; 1 phase-to- phase. • Selectable Zone 1 extension • • T1 timer (0 or 2 cycles) • Independent timers for phase and ground (T2G, T2P, T3G/T3P) • • Block selection for T2 and T3 timers • In
  • I.L. 40-385.1B iv (5/92) • All features listed as standard for the Non-Pilot MDAR V2.00 are included in the Pilot system • Independent pilot phase and ground distance units • Permissive Overreach Transfer Trip (POTT) / Simplified Unblocking • Permissive Underreach Transfer Trip (PUTT) • Directional Comparison Blocking Scheme (BLK) • POTT or Simplified Unblocking Weakfeed • • Instantaneous Forward Directional Overcurrent Function for High Re
Document Preview & Text Transcription (Main Page)
Click to expand and read text
ABB Automation, Inc. Substation Automation & Protection Division Coral Springs, FL Allentown, PA Instruction Leaflet Effective: May, 1992 Supersedes IL 40-385.1A dated January, 1992 Numerical Distance Protection REL-300 (MDAR) Relaying System Version 2.02 40-385.1B ABB Network Partner

ABB REL-300 Instruction manual [PDF] (184 pages)

  • Identifier: id-2241153
  • Brand: ABB
  • Device: REL-300 Relays
  • Type: PDF
  • Key Aspects: Recommended Spare Parts List, FAQ Section for Common Queries, Operational Mode Explanations
  • UPD Date: 01.07.2026
  • Source File: 2046479.pdf
  • Pages: 184
  • Description: Comprehensive instruction manual for the ABB REL-300.
Pages Preview:
  • MDAR REVISION NOTICE CHANGE SUMMARY: A CHANGE BAR ( | ) LOCATED IN THE MARGIN REPRESENTS A TECHNICAL CHANGE TO THE PRODUCT. DATE REV LEVEL PAGES REMOVED PAGES INSERTED 4/96 Released
  • I.L. 40-385.7 iv It is recommended that the user of REL300 equipment become acquainted with the information in this instruction leaflet before energizing the system. Failure to do so may result in injury to personnel or damage to the equip- ment, and may affect the equipment warranty. If the REL300 relay system is mounted in a cabinet, the cabinet must be bolted to the floor, or otherwise secured before REL300 installation, to prevent the system from tippi
  • I.L. 40-385.7 v PREFACE Scope This manual describes the functions and features of the REL300 Relay System. It is intended primarily for use by engineers and technicians involved in the installation, testing, operation and maintenance of the REL300 sys- tem. Equipment Identification The REL300 equipment is identified by the Catalog Number on the REL300 chassis nameplate. The Catalog Number can be decoded by using Catalog Number Table 3-1 on page 3-51 of sec
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instruction Manual V2.71 Relay Division Coral Springs, FL 33065 ABB Power T&D Company Inc. 954 752-6700 800 523-2620 O April 1996 O 4300 Coral Ridge Drive 40-385.7A ABB Network Partner REL300 Relay System

ABB REL-300: Protection Device, Relays Category Related Instructions

PNOZ X2C
Pilz PNOZ X2C
27.08.2026 12 pages

- 1 - Safety Regulations • The unit may only be installed and operated by personnel who are familiar with both these instructions and the current regulations for safety at work and accident prevention. Follow VDE and local regulations especially as regards p Device instruction manual for the Pilz PNOZ X2C Relays. This documentation details procedures for supported accessories, daily usage, setup guidelines, maintenance.

MINOTAUR MSR6R/T
Guard master MINOTAUR MSR6R/T
30.07.2026 4 pages

Deutsch / Français (b) Description When used in dual channel input mode this unit will compare the switched inputs at S13-S14 and S23-S24. In the event of a disparity between the inputs for more than 0.5 secs, the unit will lock out the outputs to the OFF sta Comprehensive guide for the Guard master MINOTAUR MSR6R/T Relays. This guide includes detailed instructions for troubleshooting, replacement parts, software installation, basic operation.

MR-41
Elko MR-41
08.07.2026 2 pages

Paměťové relé Pamätové relé Memory relay Relee de impuls Przekaźnik bistabilny Memória relék Реле памяти 1588;1589;1590;15911-02VJ-050 Rev.: 3 A4 Přístroj je konstruován pro připojení do 1-fázové sítě napět AC/DC 12-240 a musí b� Instruction guide for the Elko MR-41 Relays. It contains information on dimensions and layout, performance guidelines, setup instructions.

KS
Westinghouse KS
23.07.2026 40 pages

INSTALLATION Westinghouse t.L. 4 1-492. 1A • OPERATION • MAINTENANCE 1·N S T R V C T I 0 N S TYPE KS OUT-OF-STEP BLOCKING RELAY 0.51-30 OHMS CAUTION Before putting protective relays into service make sure that all moving parts operate freely, inspect the User instruction booklet for the Westinghouse KS Relays. This guide explains technical procedures for operational guidelines, safety, technical troubleshooting.