ADJ Focus Spot Three Z Manuals

User Instructions Rev. 2/17 ©2016 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby dis- claim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, unsufficient and negligent as- sembly, installation, rigging, and operation of this product. Europe Energy Saving Notice Energy Saving Matters (EuP 2009/125/EC) Saving electric energy is a key to help protecting the enviroment. Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you! Focus Spot Three Z ADJ Products, LLC - www.adj.com - Focus Spot Three Z Instruction Manual Page 3 ADJ Products, LLC - www.adj.com - Focus Spot Three Z Instruction Manual Page 2 • DMX-512 Protocol Compatible (2 DMX Channel Modes: 18 Chan- nels & 21 Channels) • 3 Operating Modes - Sound Active, Show Mode, & DMX Control • 5 Dimmer Curves (Standard, Stage, TV, Architectural, & Theatre) • Internal Microphone • Digital Display for Address and Function Setting • 4 Preprogrammed Shows • UC IR and Airstream IR Compatiable (Not Included) Focus Spot Three Z Features Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact ADJ Products, LLC. During operation the housing may become extremely hot. Avoid touching the unit with bare hands while in use. ADJ Products, LLC will not accept any liability for any resulting dam- ages caused by the non-observance of this manual or any unauthor- ized modification to this unit. Focus Spot Three Z Handling Precautions Focus Spot Three Z Warranty Registration The Focus Spot Three Z carries a 2 year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase and warranty. You may also register your product online at www. adj- products.com. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty you must provide a copy of your proof of purchase invoice. Please contact ADJ Products, LLC customer support for a R.A. number. To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. Focus Spot Three Z General Instructions Focus Spot Three Z General Information Unpacking: Thank you for purchasing the Focus Spot Three Z by ADJ Products, LLC. Every Focus Spot Three Z has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all equipment necessary to oper- ate the unit has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please do not return this unit to your dealer without contacting customer support first. Introduction: The Focus Spot Three Z is a DMX intelligent, moving head, mini LED was. The Focus Spot Three Z can operate as a stand alone fixture or in a Master/Slave set up. The Focus Spot Three Z has three operating modes; a sound active, show mode, DMX controlled. This fixture is suitable for theaters, studios, retail stores, and other similar locations. For best results use fog or special effects smoke to enhance the beams projections. Customer Support: ADJ Products, LLC provides a toll free cus- tomer support line, to provide help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.adj.com for any comments or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time. Voice: (800) 322-6337 Fax: (323) 582-2941 E-mail: [email protected] Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture. Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times! For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You Attempt To Install Or Operate This Unit! • To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture • Do not spill water or other liquids into or on to your unit. • Be sure that the local power outlet match that of the required volt- age for your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. • Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short. • Disconnect from main power before making any type of connection. • Do not remove the cover under any conditions. There are no user serviceable parts inside. • Never operate this unit when it’s cover is removed. • Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall. • Do not attempt to operate this unit, if it becomes damaged. • This unit is intended for indoor use only, use of this product out- doors voids all warranties. • Always mount this unit in safe and stable matter. • Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience recep- tacles, and the point where they exit from the appliance. • Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 36 for cleaning details. • Heat -This fixture should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. • The fixture should be serviced by qualified service personnel when: A. Objects have fallen, or liquid has been spilled into the appliance. B. The appliance has been exposed to rain or water. C. The appliance does not appear to operate normally or exhibits a marked change in performance. Focus Spot Three Z Safety Precautions ADJ Products, LLC - www.adj.com - Focus Spot Three Z Instruction Manual Page 5 ADJ Products, LLC - www.adj.com - Focus Spot Three Z Instruction Manual Page 4 The Focus Spot Three Z is fully operational in three different mount- ing positions, hanging upside-down from a ceiling, mounted side- ways on trussing, or set on a flat level surface. Be sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails (see next page). When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without any deformation. When installing the unit must be secured with a secondary safety attach- ment, e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit. Overhead mounting requires extensive experience, including calculat- ing working load limits, installation material being used, and perodic safety inspection of all installation material and unit. If you lack these qualifications, do not attempt the installation yourself. The installaiton should be checked by a skilled person once a year. Focus Spot Three Z Mounting ADJ Products, LLC - www.adj.com - Focus Spot Three Z Instruction Manual Page 6 ADJ Products, LLC - www.adj.com - Focus Spot Three Z Instruction Manual Page 7 Screw one clamp via a M12 screw and nut to the included bracket. Attach the bracket using the omega locks to the bottom of the Focus Spot Three Z. Attach and pull the safety- cable through one of the safety holes located on the bottom base and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten the safety screw. NOTICE: The suitable enviromental temperature for this light- ing fixture is between -25˚ C to 45˚ C. Do not place this lighting fixture in an enviroment where the temperatures are under or above the temperatures stated above. This will allow the fixture to run at its best and help prolong the fixture life. Focus Spot Three Z Mounting Focus Spot Three Z CAD Drawing 489mm/19.25” 284mm/11.1’ 183mm/7.20”

User Instructions A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade The Netherlands www.americandj.eu 6/16 A.D.J. Supply Europe B.V. – www.americandj.eu – Focus Spot Three Z Instruction Manual Page 2 ©2016 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC brands and product names are trademarks or registered trademarks of their respective companies. ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, unsufficient and negligent assembly, installation, rigging, and operation of this product. A.D.J. Supply Europe B.V. – www.americandj.eu – Focus Spot Three Z Instruction Manual Page 3 Contents GENERAL INFORMATION ........................................................................................................................................................ 4 GENERAL INSTRUCTIONS ........................................................................................................................................................ 4 FEATURES ................................................................................................................................................................................ 4 HANDLING PRECAUTIONS ....................................................................................................................................................... 4 SAFETY PRECAUTIONS ............................................................................................................................................................ 4 MOUNTING ............................................................................................................................................................................. 5 CAD DRAWING ........................................................................................................................................................................ 6 BASE LAYOUT .......................................................................................................................................................................... 7 DMX SET UP ............................................................................................................................................................................ 8 18 CHANNEL MODE .............................................................................................................................................................. 10 21 CHANNEL MODE .............................................................................................................................................................. 13 SYSTEM MENU ...................................................................................................................................................................... 15 HOME ADJUSTEMENT MENU ............................................................................................................................................... 19 OPERATION ........................................................................................................................................................................... 21 MASTER-SLAVE SET UP ......................................................................................................................................................... 21 POWER CORD DAISY CHAIN .................................................................................................................................................. 22 REMOTE OPERATION ............................................................................................................................................................ 22 CHANGING THE GOBO .......................................................................................................................................................... 23 PHOTOMETRIC CHART .......................................................................................................................................................... 23 DIMMER CURVE CHART ........................................................................................................................................................ 23 FUSE REPLACEMENT ............................................................................................................................................................. 24 CLEANING.............................................................................................................................................................................. 24 TROUBLE SHOOTING ............................................................................................................................................................. 24 SPECIFICATIONS .................................................................................................................................................................... 24 ROHS - A great Contribution to the Conservation of Environment ..................................................................................... 25 WEEE – Waste of Electrical and Electronic Equipment ........................................................................................................ 26 NOTES ................................................................................................................................................................................... 27