AirTools Ulysses 8116 Manuals

1/9 Quick Start Guide Ulysses 8116 16x Analog Output To download the latest version of Studio Matrix Designer, the Windows application that controls all Studio Matrix hardware, go to: www.airtoolsaudio.com TM Symetrix Engineered by What Ships in the Box R An Ulysses hardware device. R Studio Matrix Designer CD-ROM (Windows). R A SymLink patch cable. R A detachable power cord. R This Quick Start Guide. R An RJ-45 Incompatibility Warning sheet. What You Need to Provide R A Windows PC with 300MHz or higher Pentium and: • WIN 98SE, ME, 2000 or XP. • 10-15 MB free storage space. • 1024x768 graphics capability • 16-bit or higher colors • CD-ROM drive or Internet connec- tion. • 64MB RAM (WIN 98SE/ME), 128MB RAM (WIN 2000/XP). R An available serial port capable of operating at 57.6 or 115.2 kilobaud. R A straight-through RS-232 cable to connect the serial port of your PC to the Ulysses’s rear RS-232 port. The Ulysses’s RS-232 input is a female DB-9 connector. Getting Help Studio Matrix Designer, the Windows application that controls all Studio Matrix hardware, includes a help module which acts as a complete user’s guide for both hardware (including the Ulysses) and software. If you have questions beyond the scope of the help module, contact our Cus- tomer Support Group in the following ways: Tel (425) 778-7728 8:00 am to 4:30 pm Monday through Friday, Pacific Time Email [email protected] Web www.airtoolsaudio.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A Digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations Cet appariel numerique de la classe A respecte toutes les Exigences du Reglement sur le materiel brouilleur du Canada. Important Safety Instructions. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation open- ings. Install only in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electri- cian for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus com- bination to avoid injury from tip-over. 13. Unplug this apparatus during light- ning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug cord is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. AVIS: NE PAS OUVRIR Il ne se trouve a l’interieur aucune piece pourvant entre reparée l’usager. SEE OWNERS MANUAL. VOIR CAHIER D’INSTRUCTIONS. S’adresser a un reparateur compétent. RISQUE DE CHOC ELECTRIQUE No user serviceable parts inside. Refer servicing to qualified service personnel. CAUTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE DO NOT OPEN RISK OF ELECTRIC SHOCK The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the pres- ence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product (i.e. this Quick Start Guide). CAUTION To prevent electric shock, do not use the polarized plug supplied with the unit with any extension cord, receptacle, or other outlet unless the prongs can be fully inserted. Power Source. AirTools Ulysses hardware uses a switching power supply that automatically adjusts to the applied voltage. Ensure that your AC mains voltage is somewhere between 100-240 VAC, 50-60 Hz. Use only the power cord and connector specified for the product and your operating locale. A protec- tive ground connection, by way of the grounding conductor in the power cord, is essential for safe operation. User Serviceable Parts. There are no user serviceable parts inside the AirTools Ulysses. In case of failure, customers inside the U.S. should refer all servicing to the Symetrix factory. Customers outside the U.S. should refer all servicing to an authorized AirTools distributor. Distributor con- tact information is available online at www.airtoolsaudio.com. Before You Begin