Antari Z Series Manuals

Z-800II, Z-1000II & Z-1020 USER MANUAL Z-800II, Z-1000II und Z-1020 BEDIENUNGSANLEITUNG MODE D’EMPLOI des Z-800II, Z-1000II et Z-1020 Congratulations on the purchase of your new ANTARI Z-SERIES II FOG MACHINE. Wir beglückwünschen Sie zum Kauf Ihres neuen ANTARI Z-SERIES NEBELGERÄTES. Nous vous félicitons pour l’achat de votre nouvelle Z-SERIES machine à fumée d’ANTARI. ♦ Read and save these instructions ♦ Bitte lesen Sie diese Anweisungen und bewahren Sie sie gut auf ♦ Lisez et Gardez ces instructions © 2006 Antari Lighting and Effects Ltd. TeUser Manual

1 User Manual Antari Z Series Fog Machine Congratulations on the purchase of your new ANTARI Z Series FOG MACHINE. Introduction Thank you for choosing an ANTARI Fog Machine. You now own a rugged and powerful state-of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Fog Machine for years to come. Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog machine. Cautions Danger of electric shock ♦ Keep this device dry. ♦ For inside use only. Not designed for outside use. ♦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine that the unit is installed at the rated voltage. ♦ Always unplug your ANTARI Fog Machine before filling its tank. ♦ Keep fog machine upright. ♦ Turn off or unplug when not in use. ♦ This machine is not water- or splash-proof. If moisture, water, or fog liquid gets inside the housing, immediately unplug the unit and contact a service technician or your ANTARI dealer before using it again. ♦ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel. Danger of burns ♦ For adult use only. Fog machine must be installed out of the reach of children. Never leave the unit running unattended. ♦ Never aim the output nozzle directly at people. ♦ Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during operation. ♦ Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit. ♦ Never aim the output nozzle at open flames. ♦ The output nozzle becomes very hot during operation (300°C). Keep flammable materials at least 50 cm away from the nozzle. ♦ Always allow your ANTARI Fog Machine to cool down before attempting to clean or service it. Danger of explosion

1 2 ------ 3 ------ Functio Timer Volume Manual 1 3 ------ 3 ------ 4 5 6 Functio n Timer Volume Manual 1 User Manual Antari Z-Series Remote Controls Please follow these operation instructions to ensure a long and safe life. Cautions Danger of electric shock ♦ Keep this device dry. ♦ For inside use only. Not designed for outside use. ♦ This device is not water- or splash-proof. If moisture, water, or fog liquid gets inside the housing, immediately unplug the unit and contact a service technician or your ANTARI dealer before using it again. ♦ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel. Remote Control Operation ♦ Z-1: ♦ Z-2: 10 meter wired multi-function remote controller with 5-pin XLR connector for ANTARI Fog Machine models Z-1500 and Z-3000. Its interface allows the operator to customize fog machine functions by adjusting fogging duration, interval and volume. Its LCD displays current operating parameters, which are automatically stored in non-volatile memory, allowing the machine to be powered down without losing function settings. Instructions below: Description of the elements of the Z-2: (1) LCD-Display (2) Function-key (3) Up-/Down-keys (4) Timer-key (5) Volume-switch (6) Manual-key ♦ Via the Function key, you can adjust the desired settings. After pressing the Function key once, the display shows "Interval Set". Adjust the interval between each fog emission (within the range of 1 to 255 seconds) by means of the Up-/Down keys. By pressing the Function-key twice, the display shows "Duration Set". Adjust the duration of each fog emission (within the range of 1 to 20 seconds) by means of the Up/Down keys. Under the menus "Timer Out" and "Volume Out" you can adjust the output volume by means of the Up/Down keys. The menu "DMX Add" refers to adjusting the DMX address for DMX control or synchronization. Adjust the desired DMX-address by means of the Up/Down keys.