Audiovox Prestige APS-2K4MS Manuals

2 pdf manual(s) Audiovox Prestige APS-2K4MS for free download (Document Types: Programming manual)

Audiovox Prestige APS-2K4MS Programming manual [PDF] (6 pages)

  • Identifier: id-139586
  • Brand: Audiovox
  • Device: Prestige APS-2K4MS Transmitter
  • Type: PDF
  • Key Aspects: Initial Startup Checklist, Additional Modules and Accessories Guide, System Architecture and Design Overview
  • UPD Date: 01.04.2026
  • Source File: 47199.pdf
  • Pages: 6
  • Description: Technical guide for the Audiovox Prestige APS-2K4MS.
Pages Preview:
  • 2 Some of the more popular options available for the unused Option Buttons of your transmitter are: AS 9554 Remote Garage Door Interface (APS-2K4S only) AS 9075 Remote car starter AS 9153 Remote window roll up AS 9256 Remote trunk release relay Although the most common use of the transmitter buttons are shown on the front page of this guide, any button or button combination can be programmed into any receiver channel. Additionally, if all 4 buttons are u
  • 3
  • Enter the transmitter program mode: 1. Turn the ignition switch to the “ON” position. 2. Within 10 seconds, press and release the valet/program switch three times. (Siren emits 1 short chirp indicating channel 1 has been entered) 3. Within 10 Seconds, press and hold the ARM or ARM/DISARM button of the first transmitter you wish to remain stored into the control unit until a single chirp is heard from the siren. (Repeat this for each transmitter you wi
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 2 1 3 3 4 5 BUTTON RECEIVER CHANNEL SYSTEM FUNCTION Lock And Arm Alarm, also initiate and terminates *Panic Unlock And Disarm, also initiates and terminates *Panic. Programmable to unlock drivers door and or all doors. Lock and arm/unlock and disarm. May be programmed to unlock driver's door or all doors. Also will initiate and terminate *Panic. Pulsed or switched output to control Remote Trunk Release or optional device connected to channel 3. When pressed and release two times, will provide pulsed output or activate the Remote Start option when installed. When so equipped, this button can be used to operate an optional device connected to channel 4. When so equipped, this button can be used to operate an optional device connected to channel 5. This transmitter makes use of icons (symbols) to identify the reaction your security system/keyless entry/and or remote start system, where applicable, will have when any icon (button) is pressed. These icons are programmed at time of installation to meet the needs of the individual and to complement the vehicle that the system is installed in. To replace a transmitter or add transmitters, please follow the programming instructions listed on the pages of this manual. Transmitter Programming Guide Model APS-2K4S and APS-2K4MS * Where So Equipped

Audiovox Prestige APS-2K4MS Programming manual [PDF] (8 pages)

  • Identifier: id-141138
  • Brand: Audiovox
  • Device: Prestige APS-2K4MS Transmitter
  • Type: PDF
  • Key Aspects: Pre-Deployment Preparation Steps, Component Longevity Optimization, Risk Mitigation and Accident Prevention
  • UPD Date: 13.06.2026
  • Source File: 48825.pdf
  • Pages: 8
  • Description: Complete user documentation for the Audiovox Prestige APS-2K4MS.
Pages Preview:
  • 128-6516A 2 of 8 2 Some of the more popular options available for the unused Option Buttons of your transmitter are: AS 9554 Remote Garage Door Interface (APS-2K4S only) AS 9075 Remote car starter AS 9153 Remote window roll up AS 9256 Remote trunk release relay Although the most common use of the transmitter buttons are shown on the front page of this guide, any button or button combination can be programmed into any receiver channel. Additionally, if al
  • 128-6516A 3 of 8 3 NOTE: If your transmitter button has the Lock/Unlock icon on one button, press and release the valet push button switch 2 times then move on to step #8. 5) Press and release the valet push button switch one time to advance to channel 2. The siren will chirp 2 times and the dash mounted LED will Flash 2 times, indicating that the unit is ready to accept program- ming for channel # 2 which is only used for separate lock and unlock button
  • 128-6516A 4 of 8 4 three times. (Siren emits 1 short chirp indicating channel 1 has been entered) 3. Within 10 Seconds, press and hold the ARM or ARM/DISARM button of the first transmitter you wish to remain stored into the control unit until a single chirp is heard from the siren. (Repeat this for each transmitter you wish to remain stored in the control unit). The receiver stores up to four transmitters. To be certain all transmitter slots in the recei
  • 128-6516A 5 of 8 5 BATTERY REPLACEMENT: The transmitter incorporates a small LED visible through the case which is used to indicate battery condition. You will notice a decrease in transmitter range as the battery condition deteriorates. Transmit- ter battery replacement is recommended at least every 10 to 12 months, depending upon how frequently the transmitter is used. To replace the battery: 1) Remove the small # 0 Phillips head screw from the rear
  • 128-6516A 6 of 8 6 1)Pad Number:_________________________________ 2)Name: _______________________________________ 3)Address: ______________________________________ 4) City: ________________ State: _____ Zip Code: ________ 5) Telephone Number: (_____) _______________ 6) Total Number Of Transmitters Required: Cost Per Transmitter is: $65.00 Multiply By Number Of Transmitters X ______ 7) Enter Total Amount Enclosed _________________ (New York State
Document Preview & Text Transcription (Main Page)
Click to expand and read text
128-6516A 1 of 8 1 1 2 1 3 3 4 5 BUTTON RECEIVER CHANNEL SYSTEM FUNCTION Lock And Arm Alarm, also initiate and terminates *Panic Unlock And Disarm, also initiates and terminates *Panic. Programmable to unlock drivers door and or all doors. Lock and arm/unlock and disarm. May be programmed to unlock driver's door or all doors. Also will initiate and terminate *Panic. Pulsed or switched output to control Remote Trunk Release or optional device connected to channel 3. When pressed and release two times, will provide pulsed output or activate the Remote Start option when installed. When so equipped, this button can be used to operate an optional device connected to channel 4. When so equipped, this button can be used to operate an optional device connected to channel 5. These transmitters makes use of icons (symbols) to identify the reac- tion your security system/keyless entry/and or remote start system, where applicable, will have when any icon (button) is pressed. These icons are programmed at time of installation to meet the needs of the individual and to complement the vehicle that the system is installed in. To replace a transmitter or add transmitters, please follow the programming instructions listed on the pages of this manual. Transmitter Programming Guide * Where So Equipped Model APS-2K4, APS-2K4S, APS-2K4MS, APS-2K4SFL & APS-2K4MSFL Rev A to show make mention of PBLED & APS-2K4SFL

Prestige APS-2K4MS: Related Instructions

093BPr
Audiovox 093BPr
21.07.2026 8 pages

128-8698 1 of 8 1 1 2 1 3 3 *4 *5 BUTTON RECEIVER CHANNEL SYSTEM FUNCTION Lock And Arm Alarm, also initiate and terminates *Panic Unlock And Disarm, also initia Official product manual for the Audiovox 093BPr Transmitter. This guide describes features and operating instructions, connectivity setup, usage recommendations.

D1530
Audiovox D1530
19.06.2026 46 pages

User guide for the Audiovox D1530 Portable DVD Player. It provides instructions for safety guidelines, product specifications, hardware instructions.

XMC10A
Audiovox XMC10A
17.08.2026 26 pages

Important: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do Manual for installation and usage of the Audiovox XMC10A Car Receiver. The guide explains setup and network setup, setup guidelines, installation support.

FPE2006
Audiovox FPE2006
29.04.2026 64 pages

Before connecting, operating or adjusting this product, please read the manual completely. LCD TV Operating Manual FPE2006 FOR ASSISTANCE CALL 1-800-619-3848 O Practical user guide for the Audiovox FPE2006 LCD TV. This documentation details energy usage, operation, adjustment procedures.

GDU-325
Audiovox GDU-325
17.05.2026 9 pages

555 Wireless Blvd., HAUPPAUGE, NY 11788 OPERATING INSTRUCTIONS XXXXXXXX PRINTED IN JAPAN Issue date XX-XX GSM900/1900MHz FREQUENCY DUAL BAND SYSTEM MOBILE PHON Operational manual for the Audiovox GDU-325 Cell Phone. The guide outlines procedures for startup procedures, interface navigation, device operation tips, technical assistance.

ADC400
Audiovox ADC400
06.08.2026 16 pages

Complete operating guide for the Audiovox ADC400 Inverter. The guide provides instructions on setup instructions, control functions, troubleshooting guides, warranty information.

Similar Manuals in the Car Alarm, Transmitter Category

MC6
BEAMEX MC6
16.04.2026 112 pages

USER MANUAL FOR BEAMEX MC6 WORKSTATION, ADVANCED PANEL MOUNTED CALIBRATOR AND COMMUNICATOR Applies to firmware version 3.10 Dear user, We have made every effort Practical operating guide for the BEAMEX MC6 Touch Panel. This documentation highlights features and system setup, backup procedures, network configuration, maintenance procedures.

F10
TrekPow F10
21.05.2026 64 pages

FM TRANSMITTER CAR CHARGER User Manual F10 manuals and user guides at all-guides Reference manual for the TrekPow F10 Transmitter. It offers guidance on usage procedures, service procedures, backup procedures.

LWT300 series
ABB LWT300 series
30.06.2026 92 pages

— USER GUIDE LWT300 series Guided Wave Radar Level Transmitter all-guides.c om Technical setup manual for the ABB LWT300 series Transmitter. This guide presents instructions on installation support, device features, safety.

inteo
SOMFY inteo
18.05.2026 2 pages

L = Mains phase N = Mains neutral C = common ▲ = UP ▼ = DOWN KEY SWITCH Blue Brown ▼▲ 2 x 1,5 mm2 Neutral Phase MAINS 230V - 50Hz Dry contacts TRANSMITT Product usage manual for the SOMFY inteo Transmitter. It describes maintenance tasks and security instructions, performance guidelines, operating modes, power requirements.