BDI 6051 Manuals

3 pdf manual(s) BDI 6051 for free download (Document Types: Owner's manual)

BDI 6051 Owner's manual [PDF] (16 pages)

  • Identifier: id-1456767
  • Brand: BDI
  • Device: 6051 Indoor Furnishing
  • Type: PDF
  • Key Aspects: Hardware Verification Checklists, Additional Modules and Accessories Guide, End-of-Life Handling and Disposal
  • UPD Date: 08.09.2026
  • Source File: 1541674.pdf
  • Pages: 16
  • Description: Complete installation manual for the BDI 6051.
Pages Preview:
  • bdiusa.com customerservice@bdiusa.com CENTRO 6451/52 LIFT DESK 2 Step 2 - Install Control Module and Keypad Lay top panel upside down on a soft surface (like carpet). Attach Keypad C4 on the desired side (left or right) with 2 Wood Screws H1. Orient the Control Module C3 so that the Keypad port is facing the Keypad side and secure between the 2 steel rails with 2 Wood Screws H1 as shown. Route the Keypad cord into the groove in the panel and through the ho
  • bdiusa.com customerservice@bdiusa.com CENTRO 6451/52 LIFT DESK 3 Step 3 - Secure the keypad cord into the groove using 6 cord clips H6 and 6 wood screws H2. Connect keypad cord into the Control Module Port (labeled HS) and bundle the slack with the Hook & Loop Tie. H2 x 6 H6 x 6 Groove for Keypad Cord Hook & Loop Tie
  • bdiusa.com customerservice@bdiusa.com CENTRO 6451/52 LIFT DESK 4 Step 4 - Attach 2 Legs C1 with 4 Screws H3 per Leg using Hex Wrench T1. Start all 4 screws before tightening them down. Step 5 - Connect the leg cords to the closest port of the control module and bundle up any slack using the hook & loop tie. C1 x 2 T1 H3 x 8
  • bdiusa.com customerservice@bdiusa.com CENTRO 6451/52 LIFT DESK 5 Step 6 - Attach each Foot C2 with 4 Screws H4 using Hex Wrench T2. The long end of the foot faces the front edge of the desk. Thread in Levelers H7 into the bottom front and back corners of each foot. C2 x 2 H7 x 4 H4 x 4 H4
  • bdiusa.com customerservice@bdiusa.com CENTRO 6451/52 LIFT DESK 6 Optional Drawer Assembly for 6052 Attach the optional Drawer (for 6052) using 4 Screws H10 that came with your drawer as shown. H10 x 4
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI Made in Taiwan. 10.10.2018 v5 New Controller T2 4mm Hex Wrench C7 Wire Tray x 1 C4 Keypad x 1 C5 Power Cord x 1 C3 Control Module x 1 C8 Glass Panel x 1 A1 Main Panel x 1 C1 Leg x 2 C6 Cord Conduit x 1 C2 Foot x 2 bdiusa.com [email protected] CENTRO™ 6451/6452 LIFT DESK H5 1/4-20 x 12mm Screw x 7 Tool Required: Phillips Screwdriver H2 #6 Wood Screw x 6 H3 M6 x 12mm Screw x 8 H8 Glass Bumper x 2 C9 Grommet Cover x 1 H9 Dual Lock Dot x 8 Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Placement and Maintenance Centro Lift Desk is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Your Centro Office furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product. Step 1 Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI retailer. H7 Leveler x 4 H6 Cord Clip x 6 H1 #10 Wood Screw x 4 T1 5mm Hex Wrench H4 M6 x 16mm Screw x 8 OWNER’S MANUAL

BDI 6051 Owner's manual [PDF] (14 pages)

  • Identifier: id-2007005
  • Brand: BDI
  • Device: 6051 Indoor Furnishing
  • Type: PDF
  • Key Aspects: Standard Operating Procedures, Component Overview and Descriptions, Error Code Explanations
  • UPD Date: 31.05.2026
  • Source File: 2280853.pdf
  • Pages: 14
  • Description: Complete usage guide for the BDI 6051.
Pages Preview:
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 2 Step 2 - Install Control Module and Keypad Lay top panel upside down on a soft surface (like carpet). Attach Keypad C4 on the desired side (left or right) with 2 wood screws H1. Orient the control module C3 so that the keypad plug is facing the keypad side and secure between the 2 steel rails with 2 wood screws H1 as shown. Route the keypad cord into the groove in the panel and through the ho
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 3 Step 6 - Attach each foot with 4 screws H4 and Hex Wrench T2. Thread in the levelers H7 to the bottom of each foot. Step 5 - Attach 2 legs C1 with 4 screws H3 per leg using Hex wrench T1. Start all 4 screws before tightening them down. Connect the leg cords to either end of the control modual and bundle up any slack using the hook and loop ties. C1 x 2 C2 x 2 H7 x 4 H4 x 4 T1 H4 x 8 H3 x 8
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 4 Optional Drawer Assembly for 6052 Attach the optional drawer (for 6052) using 4 Screws that came with your drawer as shown. H10 x 4 A2
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2016, BDI Made in China. 10.10.2018 New Controller T2 4mm Hex Wrench C7 Wire tray x 1 C4 Keypad x 1 C5 Power Cord x 1 C3 Control Module x 1 C8 Glass Panel x 1 A1 Main Panel x 1 C1 Leg x 2 C6 Cord Conduit x 1 C2 Foot x 2 bdiusa.com [email protected] SEQUEL® 6051/6052 LIFT DESK H5 1/4-20 x 19mm Screw x 7 Tool Required: Phillips screwdriver H2 #6 Wood Screw x 6 H3 M6 x 15mm Screw x 8 H8 Glass Bumper x 2 C9 Grommet cover x 1 H9 Dual Lock Dot x 8 Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Placement and Maintenance Sequel® Lift Desk is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Your Sequel® Office furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product. Step 1 Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa. com. For all other concerns, please contact your BDI retailer. H7 Leveler x 4 H6 Wire clip x 6 H1 #10 Wood Screw x 4 T1 5mm Hex Wrench H4 M6 x 16mm Screw x 8 OWNER’S MANUAL

BDI 6051 Owner's manual [PDF] (15 pages)

  • Identifier: id-1200972
  • Brand: BDI
  • Device: 6051 Indoor Furnishing
  • Type: PDF
  • Key Aspects: Initial Startup Checklist, Best Practices for Everyday Use, Control Panel and Interface Navigation
  • UPD Date: 24.04.2026
  • Source File: 957307.pdf
  • Pages: 15
  • Description: Manual for installation and usage of the BDI 6051.
Pages Preview:
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 2 Step 2 - Install Control Module and Keypad Lay top panel upside down on a soft surface (like carpet). Attach Keypad C4 on the desired side (left or right) with 2 Wood Screws H1. Orient the Control Module C3 so that the Keypad port is facing the Keypad side and secure between the 2 steel rails with 2 Wood Screws H1 as shown. Route the Keypad cord into the groove in the panel and through the ho
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 3 Step 3 - Secure the keypad cord into the groove using 6 cord clips H6 and 6 wood screws H2. Connect keypad cord into the Control Module Port (labeled HS) and bundle the slack with the Hook & Loop Tie. H2 x 6 H6 x 6 Groove for Keypad Cord Hook & Loop Tie
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 4 Step 4 - Attach 2 Legs C1 with 6 Screws H3 per Leg using Hex Wrench T1. Start all 6 screws before tightening them down. Tighten the 2 outside screws first, then tighten the other 4 screws. Step 5 - Connect the leg cords to the closest port of the control module and bundle up any slack using the hook & loop tie. C1 x 2 T1 1- Tighten the 2 outside screws first 2- Tighten the front/back screws n
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 5 Step 6 - Attach each Foot C2 with 4 Screws H4 using Hex Wrench T2. The long end of the foot faces the front edge of the desk. Thread in Levelers H7 into the bottom front and back corners of each foot. C2 x 2 H7 x 4 H4 x 4 H4
  • bdiusa.com customerservice@bdiusa.com SEQUEL 6051/52 LIFT DESK 6 Optional Drawer Assembly for 6052 Attach the optional Drawer (for 6052) using 4 Screws H10 that came with your drawer as shown. H10 x 4 A2
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. Sequel & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017 BDI Made in Taiwan. 02.24.2017 v6 T2 4mm Hex Wrench C7 Wire Tray x 1 C4 Keypad x 1 C5 Power Cord x 1 C3 Control Module x 1 C8 Glass Panel x 1 A1 Main Panel x 1 C1 Leg x 2 C6 Cord Conduit x 1 C2 Foot x 2 bdiusa.com [email protected] SEQUEL® 6051/6052 LIFT DESK H5 1/4-20 x 12mm Screw x 7 Tool Required: Phillips Screwdriver H2 #6 Wood Screw x 6 H3 M6 x 12mm Screw x 12 H8 Glass Bumper x 2 C9 Grommet Cover x 1 H9 Dual Lock Dot x 8 Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Placement and Maintenance Sequel® Lift Desk is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Your Sequel® Office furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product. Step 1 Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa. com. For all other concerns, please contact your BDI retailer. H7 Leveler x 4 H6 Cord Clip x 6 H1 #10 Wood Screw x 4 T1 5mm Hex Wrench H4 M6 x 16mm Screw x 8 OWNER’S MANUAL

6051: Related Instructions

MATTHEW WEATHERLY CORRIDOR 8173
BDI MATTHEW WEATHERLY CORRIDOR 8173
27.06.2026 16 pages

CORRIDOR® 8173 LOW MEDIA CONSOLE DESIGN MATTHEW WEATHERLY LET’S GET STARTED. INSTRUCTION MANUAL Usage and setup manual for the BDI MATTHEW WEATHERLY CORRIDOR 8173 Indoor Furnishing. This manual describes setup, usage, and hardware instructions, energy usage, technical specifications, maintenance schedule.

Eileen 5156
BDI Eileen 5156
27.07.2026 3 pages

1 D - Machine Screw x 8 A1 - Glass Shelf x 1 A2 - Glass Shelf x 1 A3 - Glass Shelf x 1 A4 - Glass Shelf x 1 A5 - Glass Shelf x 1 Left Frame x 1 Right Frame x Owner’s guide for the BDI Eileen 5156 Indoor Furnishing. It outlines the setup and assembly reference, setup guidelines, shutdown procedures, operating instructions.

PSW-100
BDI PSW-100
26.05.2026 9 pages

Broadcast Devices, Inc. PSW-100 Pressure Sensor Operations Quick Start Guide Broadcast Devices, Inc. Tel. (914) 737-5032 Fax. (914) 736-6916 World Wide Web: www Reference manual for the BDI PSW-100 Kitchen Appliances. The document presents control functions, service procedures, operation.

SEQUEL 20 6114
BDI SEQUEL 20 6114
01.08.2026 12 pages

SEQUEL® 20 6114 3-DRAWER FILE PEDESTAL DESIGN MATTHEW WEATHERLY LET’S GET STARTED. INSTRUCTION MANUAL Reference manual for the BDI SEQUEL 20 6114 Indoor Furnishing. It describes usage and warranty information, performance optimization, device reset instructions, daily usage.

CENTRO 6402
BDI CENTRO 6402
12.04.2026 8 pages

CENTRO™ 6402 RETURN LET’S GET STARTED. INSTRUCTION MANUAL DESIGN MATTHEW WEATHERLY Service and user manual for the BDI CENTRO 6402 Indoor Furnishing. This guide presents instructions on testing procedures, setup validation, error codes.

CODE 7376
BDI CODE 7376
07.08.2026 6 pages

Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI User instructions for the BDI CODE 7376 Indoor Furnishing. The document includes user settings, support details, product handling, performance optimization.

Similar Manuals in the Indoor Furnishing Category

1012
Discovery Telecom 1012
13.03.2026 13 pages

915 Cornwall Road Sanford, Fl 32773 SAFETY FIRST !!!!! 1012 / 7012 / 2112 Stair Stepper Bunk Bed All of Discovery’s Bunkbeds were designed and manufactured wi Complete usage guide for the Discovery Telecom 1012 Indoor Furnishing. The guide explains operation and technical assistance, reset instructions, technical overview.

SWUB 85 B2
Silvercrest SWUB 85 B2
12.05.2026 45 pages

IAN 89525 Wärmeunterbett SWub 85 b2 Wärmeunterbett Bedienungsanleitung und Sicherheitshinweise Heated underblanket Operating instructions and safety advi Instruction and usage manual for the Silvercrest SWUB 85 B2 Indoor Furnishing. This manual details wiring diagrams, maintenance procedures, network setup.

693301
Next 693301
06.04.2026 26 pages

693301 Produced in Poland for Next Retail Ltd. 693301-2014-V1 DORSET DRESSER Assembly instructions Actual product size H202 x W105 x D46cm IMPORTANT- RETAIN FOR User instruction manual for the Next 693301 Indoor Furnishing. The manual covers procedures for maintenance procedures, system parameters, operational procedures, safety protocols.

700 Series
KI 700 Series
04.04.2026 2 pages

Assemble units as described herein only. To do otherwise may result in instability. All screws, nuts and bolts must be tightened securely and must be checked pe Operating handbook for the KI 700 Series Indoor Furnishing. The documentation includes details on product specifications, repair references, technical troubleshooting.