Bend-Tech Dragon Manuals
2 pdf manual(s) Bend-Tech Dragon for free download (Document Types: Assembly manual, Connection manual)
Bend-Tech Dragon Assembly manual [PDF] (23 pages)
- Identifier: id-1755695
- Brand: Bend-Tech
- Device: Dragon Industrial Equipment
- Type: PDF
- Key Aspects: Device Specifications Overview, Component Longevity Optimization, Error Code Explanations
- UPD Date: 23.03.2026
- Source File: 1784580.pdf
- Pages: 23
- Description: Full operation manual for the Bend-Tech Dragon.
Click to expand and read text
p.1 Bend-Tech Dragon Assembly Manual IMPORTANT: Please read before unpacking. Place shipping container in a wide open area where you will have room to work and assemble this product. Shipping • The Dragon Machine comes in two separate shipping containers: One for the primary parts and one for the rail extension. • The primary container's dimensions are 60x48x72 in. • The secondary container's dimensions are 292x12x12 for the shorter machine. (Length varies by the length of machine purchased) Inspection • Please make sure that your Dragon Machine product is properly inspected to make sure there was no damage to the machine during shipping and check to make sure that all the parts are intact and present in the containers. • Read the list of parts included on p.2-3.
Bend-Tech Dragon Connection manual [PDF] (4 pages)
- Identifier: id-1586807
- Brand: Bend-Tech
- Device: Dragon Cutter
- Type: PDF
- Key Aspects: Additional Modules and Accessories Guide, Documentation and Revision History, Cleaning and Sanitization Methods
- UPD Date: 28.05.2026
- Source File: 1593911.pdf
- Pages: 4
- Description: Step-by-step user manual for the Bend-Tech Dragon.
Click to expand and read text
Electronic Connections Step 1: Use your fingers to remove the 3/8 inch nuts securing the bottom electronics guard plate underneath the back side of the gate. Remove the guard plate itself to reveal the electronics core. Note: If you are using 230v instead of the standard 115v, you will have to change the voltage settings. Please see the Voltage Settings page at the end of this manual for further details on how to change this. Step 2: Connect the parallel cord to both the back of the machine's electrical core and the operator panel box. Make sure to secure them both by tightening the set screws on each end of the cord. Step 3: Connect the 5v power source to the back of the operator panel box and connect the other side to a wall outlet.
Dragon: Related Instructions
p.1 Bend-Tech Dragon Assembly Manual IMPORTANT: Please read before unpacking. Place shipping container in a wide open area where you will have room to work and Step-by-step guide for the Bend-Tech Dragon Industrial Equipment. This manual outlines installation steps and interface navigation, configuration options, calibration steps.
A150 Part 1 of 1 Plasma Cutting Guide Revision 1 | English ©2020 Bend-Tech LLC Installation instructions for the Bend-Tech DRAGON A150 Industrial Equipment. This guide provides technical guidance on network configuration, operating modes, setup guidelines.
Revision 6 | English A400 Part 1 of 3 Startup and Training Manual Part 1: Safety and Maintenance ©2021 Bend-Tech LLC User reference manual for the Bend-Tech Dragon A400 Industrial Equipment. It explains operation, maintenance, and software installation, component overview, user settings.
Revision 6 | English A400 Part 2 of 3 Startup and Training Manual Part 2: Machine Overview, Inspection, and Startup ©2021 Bend-Tech LLC Instruction reference guide for the Bend-Tech Dragon A400 Welding System. This guide presents instructions on maintenance guidelines, service contacts, adjustment procedures, safety.
A400 Part 1 of 1 Assembly Manual Version 2.3 | English ©2020 Bend-Tech LLC Comprehensive guide for the Bend-Tech Dragon A400 Control Systems. The guide provides instructions on warranty information, setup instructions, service instructions, repair references.
Electronic Connections Step 1: Use your fingers to remove the 3/8 inch nuts securing the bottom electronics guard plate underneath the back side of the gate. Re Complete technical documentation for the Bend-Tech Dragon Cutter. This reference manual outlines safety precautions, installation steps, security instructions, installation guides.
Similar Manuals in the Cutter, Industrial Equipment Category
IDEAL 3005 DE Betriebsanleitung EN Operating Instructions FR Mode d´emploi NL Gebruiksaanwijzing IT Manuale d´istruzione ES Instrucciones de uso Complete instruction guide for the IDEAL 3005 Cutter. The document elaborates on device functions and installation, network configuration, safety guidelines.
KONWA® KW-123 END CUTTER INSTRUCTION MANUAL & PARTS LIST Complete usage guide for the KONWA KW-123 Cutter. It details device setup and power management, calibration steps, service contacts.
Operating Instruction Manual REC-434YC Battery Powered Cutting Tool with Parts List HUSKIE TOOLS, INC. Setup instructions for the Huskie Tools REC-434YC Cutter. This guide offers instructions on system setup, product safety, setup guidelines, setup instructions.
Product operation guide for the Great Computer JII-61 Cutter. It provides guidance on usage examples, testing procedures, service procedures.