Blackberry H2 ITC100-1 Manuals

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE 31 It is recommended that you install the module as level as possible on the asset. To help ensure the device is level, you may try one of the following techniques. Technique 1: Position the T-square along the edge of the door. Using the T-square as a guide, draw a horizontal line approximately 5” (13 cm) in length, in the area you plan to install the device, with your pencil or marker. Align the bottom edge of the template to the line. Tip: To avoid leaving a permanent mark on your trailer or container after the device installation is complete, we recommend using a pencil or non-permanent marker to create the guideline. Technique 2: Visually, place the template in the desired installation location. Using a level, check that the template is level.