Citizen CT-S4000L Manuals

LINE THERMAL PRINTER MODEL CT-S4000/CT-S4000DC CT-S4000L/CT-S4000DCL CT-S4000M/CT-S4000DCM User’s Manual

4.6 Error Indication The following LED indications are added to CT-S4000L/CT-S4000DCL. LINE THERMAL PRINTER MODEL CT-S4000L/CT-S4000DCL User’s Manual Contents 1.1 Features 4.6 Error Indications 5.3 Manual Setting of Memory Switch 5.4 Selecting Paper Type 5.5 Adjusting Paper Sensor 5.6 Printing Paper 1.1 Features ●High-speed printing at a maximum of 120 mm/sec ●2-dimensional barcode ●Label of nonstep 58 to 105 mm wide as well as 112 mm is usable ●Paper sensor sensitivity adjustment by variable resistor is adopted. Status POWER LED ERROR LED Buzzer Wait for cutting label OFF Paper detection error OFF Memory Switch Function 0 (OFF) 1 (ON) SW4-4 Paper Select Thermal Roll BM.P/Lbl.P * SW4-5 Position detect Black Mark Label * The Print Width 660 dots is not available for printing a label paper. * The memory switches SW2-8 will be ignored for Label. 5.3 Manual Setting of Memory Switch Functions of memory switches SW4-4 and SW4-5 of CT-S4000L/CT-S4000DCL are as shown below. (The white-on-black characters are factory setting.) 5.4 Selecting Paper Type Paper type selection is available by the combination of memory switches SW4-4 and SW4-5 by the used of “Memory Switch Select Mode”. In addtion, the following procedure is available. 1 Enter Selecting Paper Type mode. 1)Open the printer cover and remove paper. Pressing and holding the FEED button, turn the printer power ON. The POWER LED starts blinking. 2)Release the FEED button and then close the printer cover. Buzzer sounds and the paper type currently set is indicated by the LED on the operation panel. 2 Select Paper Type. Press the FEED button to match the paper type loaded to the LED indications in the table below. (Refer to the table below.) Refer to CT-S4000/CT-S4000DC User’s Manual of standard model when reading this manual. Green lit (OFF) (OFF) Red lit Green lit Red lit Label Thermal paper roll Black Mark paper POWER LED ERROR LED CITIZEN is a registered trade mark of Citizen Holdings Co., Japan CITIZEN es una marca registrada de Citizen Holdings Co., Japón Company names and product names in this manual are trademarks or registered trademarks of relevant companies. Copyright c 2007 by CITIZEN SYSTEMS JAPAN CO., LTD.

LINE THERMAL PRINTER MODEL CT-S4000/CT-S4000DC CT-S4000L/CT-S4000DCL CT-S4000M/CT-S4000DCM User’s Manual Mode d’emploi Benutzerhandbuch Manuale dell’utente Manual de Usuario

— 1 — LINE THERMAL PRINTER MODEL CT-S4000/CT-S4000DC CT-S4000L/CT-S4000DCL CT-S4000M/CT-S4000DCM Quick Start Guide TB74922-10F 1.10E-1610 Printed in Japan GENERAL PRECAUTIONS ● Before using this product, be sure to read through this manual. After having read this manual, keep it in a safe, readily accessible place for future reference. ● The information contained herein is subject to change without prior notice. ● Reproduction or transfer of part or all of this document in any means is prohibited without permission from Citizen Systems. ●Note that Citizen Systems is not responsible for any operation results regardless of missing, error, or misprinting in this manual. ●Note that Citizen Systems is not responsible for any trouble caused as a result of using options or consumables that are not specified in this manual. ●Except explained elsewhere in this manual, do not attempt to service, disassemble, or repair this product. ●Note that Citizen Systems is not responsible for any damage attributable to incorrect operation/handling or improper operating environments that are not specified in this manual. ●Data is basically for temporary use and not stored for an extended period of time or permanently. Please note that Citizen Systems is not responsible for damage or lost profit resulting from the loss of data caused by accidents, repairs, tests or other occurrence. ●If you find loss of information, error, or uncertain matter, please contact your Citizen Systems dealer. ●If you find any disordered or missing page(s), contact your Citizen Systems dealer for replacement.