Citizen CT-S4000 Quick Start Manual

LINE THERMAL PRINTER MODEL CT-S4000/CT-S4000DC CT-S4000L/CT-S4000DCL CT-S4000M/CT-S4000DCM Quick Start Guide TB74922-10F 1.10E-1610 Printed in Japan GENERAL PRECAUTIONS ● Before using this product, be sure to read through this manual. After having read this manual, keep it in a safe, readily accessible place for future reference. ● The informa ...

IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are des ...

■Do not use or store this product in a place where it will be exposed to: * Flames or moist air. * Direct sunlight. * Hot airflow or radiation from a heating device. * Salty air or corrosive gases. * Ill-ventilated atmosphere. * Chemical reactions in a laboratory. * Airborne oil, steel particles, or dust. * Static electricity or strong magnetic f ...

Please observe the following precautions for power source and power cord: ■Do not plug or unplug the power cord with a wet hand. ■Use the printer only at the specified supply voltage and frequency. ■Check to make sure that the supply outlet from which the printer is powered has a sufficient capacity. ■Do not supply the printer from a power ...

1 Unpacking When unpacking the printer, confirm that the following are provided: ●Printer: 1 ●AC power cord : 1 (for CT-S4000, CT-S4000L, CT-S4000M) ●CD-ROM: 1 ●Sample paper roll: 1 roll ●Partition: 1 ●Screw: 1 ●Quick start guide: 1 CT-S4000 Sample paper roll CD-ROM AC power cord 2 Model Classification The printer models are classif ...

3 Connecting the AC Power Cord 1. Turn off the printer power switch. 2. For AC power type (with built-in power supply), connect the AC power cord to the AC inlet at the back of the printer and plug the AC power cord into the wall outlet. AC inlet AC power cord Cable connector Power connector Flat side 4 Connecting Interface Cables Confirm that th ...

5 Setting/Replacing the paper roll CAUTION! ■Always use the specified types of paper roll. ■Confirm that the paper roll is set correctly. ■When the paper is skewed and not extended straightforward from under the printer cover, open the printer cover and adjust the paper correctly. ■When the printer cover is opened after setting the paper, ...

7 Error Indication Status POWER LED ERROR LED Buzzer Paper-end Lights Lights Paper near-end Lights Lights Printer cover open Lights Lights Printer cover open Lights error *1 Cutter lock error Lights Head overheat error Lights Paper jam error Lights Memory check error Lights Low voltage error Lights High voltage error or Lights Power switch operati ...

LINE THERMAL PRINTER MODEL CT-S4000/CT-S4000DC CT-S4000L/CT-S4000DCL CT-S4000M/CT-S4000DCM Guide de démarrage rapide PRÉCAUTIONS GÉNÉRALES ● Après l’avoir lu, le conserver dans un emplacement sûr, aisément accessible pour une future référence. ● Les informations contenues dans ce manuel sont sujettes à des changements sans préavis. ...

IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are de ...