clare CS-PIN-10 Manuals

The CS-PIN-10 is a simple arming station that allows local control of the security system. It is battery powered and requires no installation tools. Many can be installed throughout the home to provide convenient system control. Features • Secure 4 to 10 digit disarming • Supports 1-button arming • Small yet comfortable Enroll by placing the panel into wireless enrollment mode and then sending an enrollment signal from the PINPad. Alternatively, the PINPad can be enrolled by scanning its bar code using the install Assist App. Option for sending an Enrollment Signal • Press 1 and 3 buttons simultaneously Install using the 3M VHB® tape on the back of the PINPad to adhere it to a wall. • See Pro Tips for recommendations about using 3M VHB tape. • Two #4 or #6 screws may be used instead of, or in addition to, the 3M VHB tape. • The mounting plate can also be rotated 180° for table top use (See Pro Tips). Operate using the PINPad buttons. The PINPad LED will blink when a button is activated. Disarm by entering a valid 4-10 digit user code on the number pad. Arm Away by pressing the AWAY button until the PINPad LED flashes red. Arm Stay by pressing the STAY button until the PINPad LED flashes red. Trigger a panic alarm by pressing the STAY & AWAY buttons together until the Red PINPad LED flashes repeatedly. Use the panel installation guide to verify proper system setup. Enrollment Buttons Arm Stay Arm Away LED Mounting Screw Holes VHB Tape VHB Tape I N S T A L L G U I D E I CS-PIN-10 Wireless Pinpad