Clarke Strong-Arm CBJ2B Manuals

OPERATION AND MAINTENANCE GC0615 INSTRUCTIONS BOTTLE JACK MODEL NO: CBJ2,3,5,8,10,12,15 & 20B PART NO: 7620006,7620008,76200012,7620022,7620027,7620032,7620034 & 7620037 all-guides com 2 Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected] INTRODUCTION Thank you for purchasing this CLARKE Bottle Jack. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. Keep these instructions for future reference. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. SPECIFICATIONS CBJ2B CBJ3B CBJ5B CBJ8B CBJ10B CBJ12B CBJ15B CBJ20B Rated Load (tonnes) 2 3 5 8 10 12 15 20 Min Height of saddle (mm) 148 180 185 190 195 200 205 217 Max Height of saddle (mm) 276 350 355 365 375 380 390 407 Oil capacity 0.065L 0.13L 0.175L 0.22L 0.25L 0.3L 0.34L 0.44L Dimensions (L x W x H) mm 88 x 92 x 148 92 x 100 x 180 96 x 110 x 185 103 x 118 x 190 110 x 123 x 195 116 x 136 x 200 133x 136 x 205 144 x 150 x 217 Weight (kg) 2.46 3.28 4.08 4.88 5.97 6.77 7.77 10.27 3 Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected] SAFETY PRECAUTIONS 1. Do not exceed the rated capacity of the jack. 2. Do not allow personnel to operate the jack unless they have read these safety precautions. 3. Do not operate the jack if damaged. 4. Use the jack in a suitable, well lit work area. 5. Keep the work area clean and tidy and free from unrelated items. 6. Only use the jack on level and solid ground, preferably concrete. Avoid soft/unmade ground as the jack may sink in or move. 7. Ensure non-essential persons keep a safe distance whilst the jack is in use. 8. Ensure there are no personnel or obstructions under the vehicle before lowering. 9. Do not work under the vehicle until it is fully supported by axle stands. 10. Keep hands etc clear of the vehicle until lifting is complete. 11. Ensure that you can see the saddle and jacking point throughout the jacking operation in case there is any relative movement. 12. Always ensure that the jack saddle is centred and stable on the lifting point before lifting and position the jack to avoid operating it from under the vehicle. 13. Check the vehicle weight and recommended lifting points by referring to the vehicle owners manual. Ensure the lifting point is not corroded. 14. Never tamper with the jack or modify it in any way, as this could prove to be dangerous and will invalidate the guarantee. Only use the jack for the purpose for which it is intended. 15. Use appropriate safety equipment, such as protective footwear, when using this jack. 16. Ensure that the jack is properly maintained and lubricated at all times, and that no corrosion is allowed to weaken any part of it. 17. If the jack has been subjected to an abnormal load or shock, it should be removed from service immediately and fully inspected by qualified personnel, and passed as serviceable, before being used again. 18. When not in use, store the jack, fully lowered, in a safe, dry, childproof area. 19. Always inspect the jack before use. Ensure that all parts are in good condition and operating smoothly, and that no cracks or distortion is apparent. If in doubt do not use.