CommScope FOSC-500-AA Manuals

1 FOSC-500-AA I N S T A L L A T I O N I N S T R U C T I O N Cold applied Inline Splice Closure for small Fiber Optic Cables (maximum 48 splices) 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents. 3 Cable preparation 3.1 Loose tube 3.2 Central core 4 Cable installation A Loose tube B Central core 5 Fiber organisation A 24 splice tray B 48 splice tray 6 Shield continuity/Grounding 7 Closing the closure 8 Re-opening 9 Important steps Contents 1 Introduction 1.1 Product Description The FOSC-500-AA is a cold applied re-enterable splice closure for small fiber optic cables. It provides a mechanical and environmental protection for fiber optic splices and permits easy access by the customer. The closure is applicable underground, direct buried and aerial. The closure can handle maximum 48 splices and can be used in-line and in butt configuration. The closure has 4 cable entry ports (two on each side). The cable sealing is secured by gel-end pieces under compression on both of the closure ends. 2 General 2.1 Tools Flat screwdriver Marker pen Fiber guiding pin FACC- TUBE STRIPPER-02 to strip the loose tubes TC-444-IP Rev A, Feb 2017 www.commscope.com