CommScope SYSTIMAX 360 iPatch G2 MPO Manuals

860538982 Issue 6, June 2014 www.commscope.com SYSTIMAX 360™ iPatch® G2 Fiber Sliding Shelf, MPO Distribution Panel Instructions © 2014 CommScope, Inc. All rights reserved Page 1 of 9 General The SYSTIMAX 360™ 360G2 shelf comes equipped with iPatch® MPO kits, jumper-storage trough, and polycarbonate top cover. This sliding distribution shelf includes iPatch MPO kits designed for use in an iPatch System and MPO adapters that allow connection of multi-fiber trunk cables terminated with push-on MPO connectors. These shelves mount in a standard 19-inch (483mm) rack with universal hole spacing. These shelves are intended for indoor use, but may be used outdoors in a suitable enclosure. Note: To use the SYSTIMAX 360 iPatch shelf in an existing iPatch System, the iPatch Rack and Panel Managers must be running firmware version 8.1 or later and the imVision® Controller must be running firmware version 10.1 or later. The System Manager firmware, used to manage the system, must be version 7.1 or later. We recommend that you upgrade the System Manager software to version 7.1 or a later version before you install the shelf. Ordering information is listed below: Material ID Part No. Description 760169144 360G2-iP-1U-32-MPO-DP-SD 360G2 iPatch 1U 32-MPO distribution panel, sliding shelf 760169185 360G2-iP-2U-64-MPO-DP-SD 360G2 iPatch 2U 64-MPO distribution panel, sliding shelf 1U MPO Distribution Panel 2U MPO Distribution Panel SYSTIMAX 360™ iPatch® G2 MPO Fiber Sliding Shelves This product is covered by one or more of the following U.S. patents or their foreign equivalents: 5,923,807, 6,245,998. The iPatch System is covered by U.S. patents 6,285,293, 6,522,737 and 8,344,900