Plextor StorX Quick Setup Manual

From Plextor V1.02 Includes ☆ Features Description ☆ Quick Install ☆ Detailed Setup Guide ☆ Tools Guide 1 of 46 ...

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre ...

4 Introduction 4 Connectors, Buttons and indicators 5 Rear Connections 5 Buttons and Indicators 6 Quick Installation and set up and guide 7 Connecting your Plextor StorX to your Network 9 Copy the Plextor StorX Net-Tool software (supplied on CD) onto your PC 9 Connecting Plextor StorX to a DHCP Router, Hub/Switch 9 Connecting Ple ...

Plextor StorX Unit (HDD installed) Vertical stand RJ-45 Cable 2x Antenna Power Supply Power Cable EU Power Cable UK Quick Start Guide CD Introduction Congratulations on purchasing your Plextor StorX Network Attached Storage (NAS) device. With your Plextor StorX you are able to: 1. Easily set up users, groups and folders 2. Set accessibili ...

Power Button Power LAN HDD LINK HDD ACCESS USB II LINK USB II ACCESS USB I LINK USB I ACCESS Backup Button LED Indicators 6 of 46 Power LED Green – System ready LAN LED Green – Valid Connection at 10/100/1000 Mbps HDD LINK Green – HDD ready HDD ACCESS Yellow – Data transmitting on HDD USB I / II LINK Green – Valid connection ...

By following this simple Quick Setup Guide, you will soon be enjoying your new high speed NAS. This section shows you how to setup connections and format the hard drive of your Plextor StorX. To set-up users, folders and groups please read the User Manual section. 1. Connect one end of the RJ-45 cable (supplied) to th ...

3. Connect the power adapter end to device 4. Connect the power cord end to outlet socket 5. Push the power button to power on 8 of 46 ...

Copy the Plextor StorX Net-Tool software (supplied on CD) onto your PC (select Plextor StorX Net-Tool, right click, copy, then paste to your PC) Connecting Plextor StorX to a DHCP Router, Hub/Switch When you connect your Plextor StorX to a Dynamic Host Configuration Protocol (DHCP) device, the device assigns your ...

Plextor StorX has a default IP address of 192.168.16.1.In order to change this IP address to one within the range of your static IP address router, hub/switch, you must first connect the Plextor StorX to a PC via LAN connection (please disable any wireless connection on your PC before you att ...