Cruise N Comfort HD 12L Manuals

1. Locate the area where the unit will be mounted and double check that there are NO obstructions. Make sure that the location allows for the cold air to return to the units evaporator. The unit has 4 large 3/8 “ holes punched into the stainless steel plate chassis. We recommend you through bolt this unit to the floor using at least 3/8 grade #5 bolts with lock nuts and fender washers. This unit is around 70 lbs very heavy so secure it accordingly !!! 2. Find a suitable location for the remote condenser. This condenser is not designed to be in front of a radiator, it will block the air flow and cause over heating. The remote condenser must be installed so air can enter the front of the condenser and then is pulled thru the fan. It is a good idea to have the fan toward the back of the vehicle so when traveling down the road air can easily go thru the condenser. The unit can be mounted standing up with the large port being higher than the small port and the hose exiting out the side not the top. Remote condenser can be laid almost flat, always maintain a minimum of a 15 degree angle so that the large port is always higher than the small. Page of 1 11 Installation Installation/Operating Instructions HD 12/24 L/s 12Volt Air Conditioners

1. Locate the area where the unit will be mounted and double check that there are NO obstructions. Make sure that the location allows for the cold air to return to the units evaporator. 2. Find a suitable location for the remote condenser. This condenser is not designed to be in front of a radiator, it will block the air flow and cause over heating. The remote condenser must be installed so air can enter the front of the condenser and then is pulled thru the fan. It is a good idea to have the fan toward the back of the vehicle so when traveling down the road air can easily go thru the condenser. The unit can be mounted standing up with the large port being higher than the small port and the hose exiting out the side not the top. Remote condenser can be laid almost flat, always maintain a minimum of a 15 degree angle so that the large port is always higher than the small. Page � of � 1 7 Installation Installation/Operating Instructions HD 12/24 L/s 12Volt Air Conditioners Large port Small port