CyberData 011171 Manuals

The IP Endpoint Company Installation Quick Reference VoIP V3 Zone Controller: 4-Port Audio Out SIP Compliant 011171 Quick Reference 930445B © 2011 CyberData Corporation ALL RIGHTS RESERVED © 2011 CyberData Corporation ALL RIGHTS RESERVED 930445B Quick Reference Mounting Contacting CyberData Drill Hole Size for Anchor Installation: 3/16" (0.1875") You have the option to use the following mounting template to mark, and then drill two 3/16" (0.1875”) holes for the plastic ribbed anchors. To install and mount the V3 Zone Controller: 1. Install the plastic ribbed anchors in the holes, and position the V3 Zone Controller mounting holes over the anchors. 2. Use the two #6 x 1 1/2" screws to secure the V3 Zone Controller onto the mounting surface. Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Web: http://www.cyberdata.net/support/contactsupportvoip.html RMA Dept: (831) 373-2601 ext. 136 Email: [email protected] RMA Status: http://www.cyberdata.net/support/rmastatus.html Warranty and RMA information is available at the following website: http://www.cyberdata.net/support/warranty/index.html Corporate Headquarters CyberData Corporation 3 Justin Court Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 www.CyberData.net The VoIP V3 Zone Controller with Audio-Out enables access to existing paging speakers through a VoIP phone system. The interface is designed to use a standard paging amplifier with audio inputs and supports paging up to 15 zone groups from a VoIP phone. Getting Started • Be sure that you have received all the parts described in the Parts List section. • Download the VoIP V3 Zone Controller Operations Guide from the following website address: http://www.cyberdata.net/products/voip/legacyanalog/pagingzonev3/docs.html Parts List Product Specifications Regulatory Compliance FCC Class A, UL 60950, CE Power Requirement PoE or +48VDC LAN Speed 10/100 Mbps Protocol SIP compliant Part Number 011171 Dimensions 6.11”L x 4.05”W x 1.15” H Weight 1.2 lbs. (2) #6 Plastic Ribbed Anchors (2) #6 x 1 1/2" Screws (1) Mounting Template (see the last page) (1) Mounting Kit (1) VoIP Zone Controller - 4-Port Audio Out

VoIP V3 Zone Controller 4-Port Audio Out Operations Guide Part #011171 Document Part #930446E for Firmware Version 6.0.2 CyberData Corporation 3 Justin Court Monterey, CA 93940 (831) 373-2601 The IP Endpoint Company

The IP Endpoint Company Installation Quick Reference VoIP V3 Zone Controller: 4-Port Audio Out SIP Compliant 011171 Quick Reference 930445E © 2014 CyberData Corporation ALL RIGHTS RESERVED © 2014 CyberData Corporation ALL RIGHTS RESERVED 930445E Quick Reference Mounting Contacting CyberData To mount the V3 Zone Controller: 1. On the mounting location, mark and then drill two 3/16-inch (0.1875-inch) holes 3.5 inches apart from and parallel to each other for the plastic-ribbed anchors and screws. See the drawing below. 2. Insert the plastic-ribbed anchors into the prepared holes. 3. Install the #6 screws into the plastic-ribbed anchors and leave approximately 1/8-inch gap from the screw head to the wall. 4. Determine which sides of the V3 Zone Controller will be facing up, and then slide the V3 Zone Controller down over the screws to latch onto the screws. Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Web: http://www.cyberdata.net/support/contactsupportvoip.php RMA Dept: (831) 373-2601 ext. 136 Email: [email protected] RMA Status: http://www.cyberdata.net/support/rmastatus.html Warranty and RMA information is available at the following website: http://www.cyberdata.net/support/warranty/index.html Corporate Headquarters CyberData Corporation 3 Justin Court Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 www.CyberData.net The VoIP V3 Zone Controller with Audio-Out enables access to existing paging speakers through a VoIP phone system. The interface is designed to use a standard paging amplifier with audio inputs and supports paging up to 15 zone groups from a VoIP phone. Getting Started • Be sure that you have received all the parts described in the Parts List section. • Download the VoIP V3 Zone Controller Operations Guide from the following website address: http://www.cyberdata.net/products/voip/legacyanalog/pagingzonev3/docs.html Parts List Product Specifications Regulatory Compliance FCC Class A, UL 60950, CE Power Requirement PoE or +48VDC LAN Speed 10/100 Mbps Protocol SIP compliant Part Number 011171 Dimensions 6.11”L x 4.05”W x 1.15” H Weight 1.2 lbs. (2) #6 Plastic-Ribbed Anchors (2) #6 x 1 1/2-inch Screws (1) Mounting Kit (1) VoIP Zone Controller - 4-Port Audio Out