Victaulic 809N Installation Instructions

IMPORTANT INFORMATION WARNING • Read and understand all instructions before attempting to install, remove, adjust, or maintain any Victaulic piping products. • Depressurize and drain the piping system before attempting to install, remove, adjust, or maintain ...

RING DETAIL RING WELD DETAIL MECHANICAL JOINT DETAIL Style 809N Coupling Ring ("Ø A") SEE NOTE 4 "X" MIN "B" "T" SEE NOTE 6 (”S”) "E1" ("S") "E2" SEE NOTE 9 S(E1) G S(E2) SEE NOTES 3 AND 8 Ring Opening WELD SIZE TABLE Nominal Pipe Size inches/ ...

COUPLING INSTALLATION CAUTION • A thin coat of Victaulic Lubricant shall be used on the gasket sealing lips and exterior to prevent the gasket from pinching/tearing during installation. Failure to use a compatible lubricant will cause gasket damage, resu ...

For complete contact information, visit victaulic.com I-809N 11252 REV A UPDATED 10/2017 Z000809N00 VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY AND/OR ITS AFFILIATED ENTITIES IN THE UNITED STATES AND/OR OTHER COUNTRIES. © 2017 VICTAULIC COMPANY. ...