CyberData 011410 Manuals

Quick Reference 931332C © 2019, CyberData Corporation, ALL RIGHTS RESERVED © 2019, CyberData Corporation, ALL RIGHTS RESERVED 931332C Quick Reference Typical System Installation Getting Started • Download the Operations Guide PDF file, from the Downloads tab at the following webpage: https://www.cyberdata.net/products/011410 • Create a plan for the locations of your Intercoms. • WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes. • WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant. • WARNING: This enclosure is not rated for any AC voltages! Parts Parameter Factory Default Setting IP Addressing DHCP IP Addressa a. Default if there is not a DHCP server present. 10.10.10.10 Web Access Username admin Web Access Password admin Subnet Maska 255.0.0.0 Default Gatewaya 10.0.0.1 802.3af Compliant Ethernet Switch Video Outdoor Intercom IP Phone IP PBX Server *More installation and mounting information is available in the Operations Guide. Accessory Kit Mounting Component (1) Assembly (1) 1/2-inch EMT compression connector with extra sealing locknut (1) 531085* Hole plug assembly Optional Accessories Optional Accessories (for gooseneck mounting) (4) Carriage bolts (4) Carriage bolt nuts (4) Carriage bolt washers (4) Security Torx Screws Security Torx Key Connecting the Intercom (Service Loop Routing) Securing the Intercom Contacting CyberData Assembly Faceplate Faceplate Mounting Screws Flat Head Phillips or Security Torx Gang Box Cable Network Service Loop Ground Lug Assembly Faceplate Faceplate Mounting Screws Flat Head Phillips or Security Torx Gang Box Nut Service Loop Wire Ground Ground Cable Installation Network Cable Installation Assembly Faceplate Faceplate Mounting Screws Flat Head Phillips or Security Torx Gang Box Torx Key GENERAL ALERT Note: To mount the intercom, use methods compliant with local electrical codes. Caution Equipment Hazard: Do not use an electric or power screwdriver to fasten the faceplate and PCB assembly to the gang box. To prevent over-torque damage to the gasket, do not apply more than 10 inch-pounds force. Over-torquing will cause the gasket to tear, Note: More installation and mounting information is illustrated in the Operations Guide. risk moisture intrusion, and effectively voi the manufacturer's warranty. Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Support Website: http://support.cyberdata.net/ RMA Department: (831) 373-2601 ext. 136 RMA Email: [email protected] RMA Status: http://support.cyberdata.net/ Warranty Information: http://support.cyberdata.net/ Corporate Headquarters CyberData Corporation 3 Justin Court Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 http://www.cyberdata.net/ The IP Endpoint Company Installation Quick Reference SIP-enabled h.264 Video Outdoor Intercom 011410

Quick Reference 931332A © 2017, CyberData Corporation, ALL RIGHTS RESERVED © 2017, CyberData Corporation, ALL RIGHTS RESERVED 931332A Quick Reference Typical System Installation Getting Started • Download the Operations Guide PDF file, from the Downloads tab at the following webpage: http://www.cyberdata.net/voip/011410/ • Create a plan for the locations of your Intercoms. • WARNING: This product should be installed by a licensed electrician according to all local electrical and building codes. • WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • WARNING: The PoE connector is intended for intra-building connections only and does not route to the outside plant. • WARNING: This enclosure is not rated for any AC voltages! Parts Parameter Factory Default Setting IP Addressing DHCP IP Addressa a. Default if there is not a DHCP server present. 10.10.10.10 Web Access Username admin Web Access Password admin Subnet Maska 255.0.0.0 Default Gatewaya 10.0.0.1 802.3af Compliant Ethernet Switch Video Outdoor Intercom IP Phone IP PBX Server *More installation and mounting information is available in the Operations Guide. (1) Intercom Assembly (1) Spacer for half-inch set conduit connector (1) 531085B hole plug assembly Optional Accessories (for gooseneck mounting) (1) T-15H Torx Key (4) Security Torx Screw (4) Carriage bolts (4) Carriage bolt nuts (4) Carriage bolt washers Optional Accessories Connecting the Intercom (Service Loop Routing) Securing the Intercom Contacting CyberData Assembly Faceplate Faceplate Mounting Screws Flat Head Phillips or Security Torx Gang Box Cable Network Service Loop Ground Lug Assembly Faceplate Faceplate Mounting Screws Flat Head Phillips or Security Torx Gang Box Nut Service Loop Wire Ground Ground Cable Installation Network Cable Installation Assembly Faceplate Faceplate Mounting Screws Flat Head Phillips or Security Torx Gang Box Torx Key GENERAL ALERT Note: To mount the intercom, use methods compliant with local electrical codes. Caution Equipment Hazard: Do not use an electric or power screwdriver to fasten the faceplate and PCB assembly to the gang box. To prevent over-torque damage to the gasket, do not apply more than 10 inch-pounds force. Over-torquing will cause the gasket to tear, Note: More installation and mounting information is illustrated in the Operations Guide. risk moisture intrusion, and effectively voi the manufacturer's warranty. Sales: (831) 373-2601 ext. 334 Support: 831-373-2601 ext. 333 Support Website: http://support.cyberdata.net/ RMA Department: (831) 373-2601 ext. 136 RMA Email: [email protected] RMA Status: http://support.cyberdata.net/ Warranty Information: http://support.cyberdata.net/ Corporate Headquarters CyberData Corporation 3 Justin Court Monterey, CA 93940, USA Phone: 831-373-2601 Fax: 831-373-4193 http://www.cyberdata.net/ The IP Endpoint Company Installation Quick Reference SIP-enabled h.264 Video Outdoor Intercom 011410