Cypress MB2198-01 Manuals

The following document contains information on Cypress products. The document has the series name, product name, and ordering part numbering with the prefix “MB”. However, Cypress will offer these products to new and existing customers with the series name, product name, and ordering part number with the prefix “CY”. How to Check the Ordering Part Number 1. Go to www.cypress.com/pcn. 2. Enter the keyword (for example, ordering part number) in the SEARCH PCNS field and click Apply. 3. Click the corresponding title from the search results. 4. Download the Affected Parts List file, which has details of all changes For More Information Please contact your local sales office for additional information about Cypress products and solutions. About Cypress Cypress is the leader in advanced embedded system solutions for the world's most innovative automotive, industrial, smart home appliances, consumer electronics and medical products. Cypress' microcontrollers, analog ICs, wireless and USB-based connectivity solutions and reliable, high-performance memories help engineers design differentiated products and get them to market first. Cypress is committed to providing customers with the best support and development resources on the planet enabling them to disrupt markets by creating new product categories in record time. To learn more, go to www.cypress.com. F2MC-16FX Family, Emulator System MB2198-01 Installation Guide Doc. No. 002-05547 Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 http://www.cypress.com Copyrights F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 2 Copyrights © Cypress Semiconductor Corporation, 2006-2016. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life- support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Trademarks All other trademarks or registered trademarks referenced herein are property of the respective corporations. Source Code Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 3 Contents 1. Introduction ................................................................................................................................................................... 5 2. Hardware Requirements ............................................................................................................................................... 6 2.1 Devices .................................................................................................................................................................. 6 3. Setting up the Emulation System ................................................................................................................................. 8 3.1 Installing the emulator system ................................................................................................................................ 8 3.1.1 Adapter Board ........................................................................................................................................... 8 3.1.2 Main-Clock ................................................................................................................................................ 9 3.1.3 Sub-Clock ............................................................................................................................................... 10 3.1.4 C-pin switching ....................................................................................................................................... 10 3.1.5 Mount the Adapter Board on the Emulator .............................................................................................. 10 3.1.6 Insert the Evaluation Chip ....................................................................................................................... 11 3.1.7 Connect the Probe Cable to the Adapter Board ...................................................................................... 11 3.1.8 Connect the Emulator System with the Starter Kit .................................................................................. 11 3.1.9 The BGA416 MCU emulator system then looks like in the picture below: .............................................. 12 3.1.10 DIP switches on the Target System (e. g. FLASH-CAN-100P-340) ........................................................ 12 3.1.11 Connect the MB2198-01 Emulator to a PC or a LAN network ................................................................ 12 3.1.12 Power connection ................................................................................................................................... 12 3.1.13 Power down ............................................................................................................................................ 12 4. Setting up the Emulation Software ............................................................................................................................ 13 4.1 Installing the emulator software on PC ................................................................................................................. 13 4.2 Check Emulation System with the IO-Port Sample Project .................................................................................. 13 5. Troubleshooting .......................................................................................................................................................... 17 5.1 Emulator Software does not work in debugging mode ......................................................................................... 17 5.2 Wrong COM-Port in Softune Workbench ............................................................................................................. 17 5.3 Emulator MB2198-01 Menu Settings.................................................................................................................... 18 5.4 Using LAN ............................................................................................................................................................ 18

F²MC-16FX Family, Emulating and Debugging with Softune and MB2198-01 Doc. No. 002-04828 Rev. *B Cypress Semiconductor 198 Champion Court San Jose, CA95134-1709 http://www.cypress.com Copyrights F²MC-16FX Family, Emulating and Debugging with Softune and MB2198-01, Doc. No. 002-04828 Rev. *B 2 © Cypress Semiconductor Corporation, 2007-2018. This document is the property of Cypress Semiconductor Corporation and its subsidiaries, including Spansion LLC (“Cypress”). This document, including any software or firmware included or referenced in this document (“Software”), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress’s patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited. TO THE EXTENT PERMITTED BY APPLICABLE LAW,CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No computing device can be absolutely secure. Therefore, despite security measures implemented in Cypress hardware or software products, Cypress does not assume any liability arising out of any security breach, such as unauthorized access to or use of a Cypress product. In addition, the products described in these materials may contain design defects or errors known as errata which may cause the product to deviate from published specifications.To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. Cypress products are not designed, intended, or authorized for use as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, life-support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal injury, death, or property damage (“Unintended Uses”). A critical component is any component of a device or system whose failure to perform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from or related to all Unintended Uses of Cypress products. You shall indemnify and hold Cypress harmless from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any Unintended Uses of Cypress products. Cypress, the Cypress logo, Spansion, the Spansion logo, and combinations thereof, WICED, PSoC, CapSense, EZ-USB, F- RAM, and Traveo are trademarks or registered trademarks of Cypress in the United States and other countries. For a more complete list of Cypress trademarks, visit cypress.com. Other names and brands may be claimed as property of their respective owners. F²MC-16FX Family, Emulating and Debugging with Softune and MB2198-01, Doc. No. 002-04828 Rev. *B 3 Contents 1. Introduction .................................................................................................................................................................... 5 2. Sample Program ............................................................................................................................................................ 6 2.1 Start new project with Softune Workbench ............................................................................................................ 6 2.2 “Main.c” .................................................................................................................................................................. 6 2.3 Compiling “Main.c” ................................................................................................................................................. 7 3. Debugging, First steps .................................................................................................................................................. 9 3.1 Setup Hardware ..................................................................................................................................................... 9 3.2 Entering Debugger Mode ....................................................................................................................................... 9 3.3 Using Bookmarks................................................................................................................................................. 10 3.4 Start Execution .................................................................................................................................................... 11 3.5 Stop Execution .................................................................................................................................................... 11 3.6 Reset MCU .......................................................................................................................................................... 11 4. Monitoring and Manipulating ...................................................................................................................................... 12 4.1 Monitoring and Manipulating Processor Status ................................................................................................... 12 4.2 Monitoring and Manipulating CPU Registers ....................................................................................................... 12 4.3 Monitoring and Manipulating Assembly Variables ............................................................................................... 14 4.4 Monitoring and Manipulating C Variables ............................................................................................................ 15 4.5 Monitoring and Manipulating Memory .................................................................................................................. 15 4.6 Symbol view ........................................................................................................................................................ 17 4.7 Local variables ..................................................................................................................................................... 18 5. Breakpoints .................................................................................................................................................................. 19 5.1 Setting Break points ............................................................................................................................................. 19 5.1.1 Setting code break point through editor window ..................................................................................... 19 5.1.2 Setting code break point using Dialog box .............................................................................................. 21 5.1.3 Data Break point ..................................................................................................................................... 25 5.2 Position of Break point ......................................................................................................................................... 29 6. Trace ............................................................................................................................................................................. 34 6.1 Trace Window ...................................................................................................................................................... 34 6.2 Trace View ........................................................................................................................................................... 36 6.3 Refreshing Trace View ........................................................................................................................................ 37 6.4 Trace Jump .......................................................................................................................................................... 37

FR Family, MB91460 Emulation System Doc. No. 002-05146 Rev. *A Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 http://www.cypress.com Copyrights FR Family, MB91460 Emulation System, Doc. No. 002-05146 Rev. *A 2 Copyrights © Cypress Semiconductor Corporation, 2005-2016. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life- support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Trademarks All other trademarks or registered trademarks referenced herein are property of the respective corporations. Source Code Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without the express written permission of Cypress. Disclaimer CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress‟ product in a life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. Use may be limited by and subject to the applicable Cypress software license agreement. FR Family, MB91460 Emulation System, Doc. No. 002-05146 Rev. *A 3 Contents 1. Introduction .................................................................................................................................................................... 5 2. Hardware Requirements ............................................................................................................................................... 6 3. Software Installation ...................................................................................................................................................... 7 3.1 Softune Workbench ............................................................................................................................................... 7 4. Installation of the Emulation System ........................................................................................................................... 8 4.1 Providing a Clock Source ...................................................................................................................................... 8 4.2 Checking the Jumpers ........................................................................................................................................... 8 4.3 Connecting the Emulation System ......................................................................................................................... 9 4.3.1 Cabling the Emulator MB2198-01 ............................................................................................................. 9 4.3.2 Mounting the Evaluation MCU ................................................................................................................ 10 4.3.3 Connecting and Cabling the Adapter Board to the Evaluation Board ..................................................... 10 4.4 Power up the Emulation System .......................................................................................................................... 13 5. Jumpers and Switches ................................................................................................................................................ 14 5.1 Jumpers of the MB91V460 Adapter Board (MB2198-300) .................................................................................. 14 5.1.1 V-Chip Options ....................................................................................................................................... 14 5.1.2 Emulator Interface .................................................................................................................................. 15 5.1.3 External Emulation Memory .................................................................................................................... 16 5.1.4 Clock Control .......................................................................................................................................... 17 5.1.5 Power Settings ........................................................................................................................................ 18 5.1.6 Signal Routing ........................................................................................................................................ 18 5.1.7 Default Jumper Settings .......................................................................................................................... 19 5.2 Jumpers of the evaluation board SK-91460-MAIN V1.2 ...................................................................................... 20 5.2.1 Analogue Power Supply Voltage ............................................................................................................ 20 5.2.2 Default Jumper Settings .......................................................................................................................... 21 5.3 Default Jumper Settings of the evaluation board SK-91F467D-208PFV ............................................................. 22 5.4 Default Jumpers Settings of the probe cable PB-91467D-208PFV ..................................................................... 23 5.5 Default Jumpers Settings of the probe cable PB-91467D-LS-208PFV ................................................................ 24 6. Softune Workbench Getting Started .......................................................................................................................... 25 6.1 Copying the “template” directory .......................................................................................................................... 25 6.2 Adjusting the project files ..................................................................................................................................... 25 6.3 Opening the Softune Workbench ......................................................................................................................... 26 6.4 Entering the code................................................................................................................................................. 28