De Agostini Model Space C57 Manuals

5 pdf manual(s) De Agostini Model Space C57 for free download (Document Types: Manual )

De Agostini Model Space C57 Manual  [PDF] (20 pages)

  • Identifier: id-1890303
  • Brand: De Agostini
  • Device: Model Space C57 Toy
  • Type: PDF
  • Key Aspects: Device Specifications Overview, Information on Regular Maintenance, Safety Recommendations and Warnings
  • UPD Date: 22.05.2026
  • Source File: 1832459.pdf
  • Pages: 20
  • Description: User guide for the De Agostini Model Space C57.
Pages Preview:
  • Contents Step by step Page Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2016 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in p
  • Tools Where your parts fit 190 Step by step: Stage 83 Detailing the tender 4 Tender upper plate Buffer Coupling buffer Brake hose Drawbar pin Screws (2 x 4mm) x 7 Phillips screwdriver Synthetic rubber adhesive (SRA) Tweezers Pliers 1 Familiarise yourself with the coupling buffer using the photo above as a guide. Line the part up to the circled holes at the rear of the tender. Use two 2 x 4mm screws to secure it. Your parts Shorter side on top Tender upper
  • 191 Your assembly should look like this. Complete Instant adhesive 5 4 2 Lower the tender upper plate into the top of the tender, as shown. Turn the tender upside down and fit the drawbar pin into the circled hole using tweezers. You can remove the front truck to make this easier. Now line up the buffer to the circled holes at the front of the tender. It does not matter which way round it goes. Use pliers to tighten the pin into place. Use two 2 x 4mm scre
  • Tools Where your parts fit 192 Step by step: Stage 84 The base 1 Front end frame Side frame A Side frame B Frame joint Cap bolts x 8 Hex wrench 1 Familiarise yourself with side frames A and B. Now do the same for the front end frame and frame joint. Longer space between holes and frame ends Painted edge on top Frame joint Frame joint Front end frame Front end frame Indent Front Front Front Front A A B B Your parts Work of this issue Front base section Hex
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Build the Steam Locomotive Pack 11

De Agostini Model Space C57 Manual  [PDF] (19 pages)

  • Identifier: id-1890304
  • Brand: De Agostini
  • Device: Model Space C57 Toy
  • Type: PDF
  • Key Aspects: Package Contents and Accessories List, Hardware Setup Instructions, Model Variations and Compatibility
  • UPD Date: 16.07.2026
  • Source File: 1832458.pdf
  • Pages: 19
  • Description: Manual for installation and usage of the De Agostini Model Space C57.
Pages Preview:
  • Contents Stage 13: The safety valves and motion bars Stage 14: The piston rods and cylinder covers Stage 15: The cylinder side plates Stage 16: The piston rods and crossheads Stage 17: The rear underframe Stage 18: Rear end beam and plate Stage 19: The motion frame Stage 20: The equalising bars 31 33 35 38 40 42 44 46 Step by step Pages Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Ba
  • Step by step: Stage Tools Where your parts fit 31 13 The safety valves and motion bars Front steam chest covers × 2 Piston valve tail guides A × 2 Piston valve tail guides B × 2 Motion bars × 2 Cylinder safety valves × 2 2 × 5mm screws x 3 Phillips screwdriver Synthetic rubber adhesive Flat file or sandpaper Toothpick 1 Valve guide Cylinder safety valve Motion bar Your parts Insert one of the cylinder safety valves into one of the cylinder covers on
  • 32 2 3 4 5 Complete Check the two motion bars for any burrs or flash left over from casting. Position the front end of one of the bars over the hole in the square projection on the cover. Repeat this for the other cover. Apply a small amount of synthetic rubber adhesive to the front steam chest covers, and insert the covers into the two holes in the front plate, pressing firmly into place. Loosely fix it in place with a 2 × 5mm screw. Remove any you find
  • Step by step: Stage Tools Where your parts fit 33 14 The piston rods and cylinder covers Piston rods × 2 Piston rod housings × 2 Cylinder safety valves × 2 Front cylinder covers × 2 Synthetic rubber adhesive Instant adhesive 1 Front cylinder cover Piston assembly rod guide Piston assembly rod guide Apply synthetic rubber adhesive to the thin end of one of the piston rods. Insert the piston rod into the hole in the rectangular end of a piston rod housin
  • 34 2 3 4 Complete It is always best to use as small an amount of instant adhesive as possible, but, as it is a liquid adhesive, it is easy to apply too much. If this happens, you can use some tissue twisted to a point to soak up the excess, as shown on the right. You can also use a cotton swab, but this will lack the narrow tip that the rolled tissue will have. As superglue dries quickly, you will need to act fast. Before the adhesive dries, place the asse
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Build the Steam Locomotive Pack 03

De Agostini Model Space C57 Manual  [PDF] (18 pages)

  • Identifier: id-1890305
  • Brand: De Agostini
  • Device: Model Space C57 Toy
  • Type: PDF
  • Key Aspects: Glossary of Technical Terms, Best Practices for Everyday Use, Documentation and Revision History
  • UPD Date: 16.08.2026
  • Source File: 1832457.pdf
  • Pages: 18
  • Description: Setup instructions for the De Agostini Model Space C57.
Pages Preview:
  • Contents Stage 21: The leaf springs Stage 22: The second wheels Stage 23: The third wheels Stage 24: The connecting rods Stage 25: The valve gear Stage 26: The motion plates Stage 27: The leading truck Stage 28: The leading truck 2 50-51 52-53 54-55 56-57 58-59 60-61 62-63 64-65 Step by step Pages Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road,
  • Step by step: Stage Tools Where your parts fit 50 21 The leaf springs Leaf springs × 6 Links (medium) × 8 Links (long) × 2 Links (short) × 2 Screws (2 × 8mm) × 11 Screws (2 × 7mm) × 7 Screws (2 × 6mm) × 13 Nuts × 22 Bushes (4.5mm) × 8 Bushes (3.5mm) × 2 Phillips screwdriver Pliers Socket wrench (4mm) 1 Leaf springs The six leaf springs fit together with the three sizes of links, as shown above. Your parts Right First wheels Second wheels Third
  • 51 2 5 3 4 Here you can see how the leaf springs and links fit together, secured by the 2 × 6mm screws and nuts. Insert a 4.5mm bush into the front hole of the rear equalising bars. Then, take the second wheel leaf spring and place over the underframe, so the bottom of the links are positioned over the ends of the equalising bars. Pass a 2 × 8mm screw through the hole and secure with a nut. Repeat this step to fit the other first wheel leaf spring to the
  • Step by step: Stage Tools Where your parts fit 52 22 The second wheels Second wheels Axle box A × 4 Axle box B × 4 Axle box guards × 4 Screws (2 × 5mm) × 9 Bushes × 2 Phillips screwdriver 1 Axle box The second driving wheels Assemble axle boxes A and B as shown above. Complete the four sets. Take one of the axle boxes and slide it up into the gap in the underframe, positioning the frame in the grooves at the side of the axle box. Test-fit the remaini
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Build the Steam Locomotive Pack 04

De Agostini Model Space C57 Manual  [PDF] (19 pages)

  • Identifier: id-1890306
  • Brand: De Agostini
  • Device: Model Space C57 Toy
  • Type: PDF
  • Key Aspects: Best Practices for Everyday Use, Initial Startup Checklist, Hardware Verification Checklists
  • UPD Date: 22.04.2026
  • Source File: 1832456.pdf
  • Pages: 19
  • Description: Complete device guide for the De Agostini Model Space C57.
Pages Preview:
  • Contents Step by step Page Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2016 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in p
  • Step by step: Stage Tools Where your parts fit 68 29 The leading truck 3 Equaliser (outer) × 2 Equaliser (inner) × 2 Leaf springs × 2 Hanging links × 4 Nuts (M2) × 4 Screws (2 × 10mm) × 3 Hex head screws (2 × 8mm) × 5 Phillips screwdriver Pliers PVA glue Socket wrench 1 Pass the threaded part of the link through the hole in the leaf spring, and tighten a nut onto it. Lay out a leaf spring, two hanging links and two nuts, as shown. Repeat this proc
  • 69 2 3 The holes in the outer and inner equalisers are different, as shown above. Place the equalisers on either side of the leaf spring. Tighten a hex head screw through the aligned holes of the outer equaliser, the links and the inner equaliser. Make a second set. Place one of the leaf springs between an inner and an outer equaliser, along with two 2 × 8mm hex head screws. 4 Loosen the hex head screws slightly and then apply some PVA glue to the ends o
  • Step by step: Stage Tools Where your parts fit 70 30 The leading truck 4 Leading wheel A Leading wheel B (spoked) Phillips screwdriver Flat head driver 1 As well as the two leading wheels from this stage, you will also need the leading truck, as well as the side stays, washers, centre pin and 2 × 4mm screws from Stage 28. Make sure that when you are fitting the wheels of the leading truck that you have the spoked wheels at the rear (above left). Side stay
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Build the Steam Locomotive Pack 05

De Agostini Model Space C57 Manual  [PDF] (18 pages)

  • Identifier: id-1890307
  • Brand: De Agostini
  • Device: Model Space C57 Toy
  • Type: PDF
  • Key Aspects: System Limitations and Considerations, Environmental Factors and Restrictions, Device Specifications Overview
  • UPD Date: 14.06.2026
  • Source File: 1832455.pdf
  • Pages: 18
  • Description: Official user manual for the De Agostini Model Space C57.
Pages Preview:
  • Contents Stage 05: The front deck Stage 06: The feedwater system Stage 07: The release lever Stage 08: The inspection lids Stage 09: The front deck parts Stage 10: The main underframe Stage 11: The main underframe front Stage 12: The cylinder plates 13 15 17 19 21 23 25 27 Step by step Pages Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, Londo
  • Step by step: Stage Tools Where your parts fit 13 1 The front deck base fits onto the projecting tab at the bottom of the smokebox. Test-fit the front deck base onto the tab, aligning the circled holes of both. Front deck Front deck side Your parts The front deck Front deck base Front deck upper plate Front left deck side Front right deck side 3 screws 2 × 4mm Phillips screwdriver Multi-purpose adhesive Instant adhesive 05
  • 14 2 3 4 Remove the deck base and apply some multi-purpose adhesive to the tab. You can apply instant adhesive to the ends of the screws to ensure they stay in position. Before the glue dries, move the deck to the left and right, trying to get it as close to the smokebox as possible. This stage is now complete. It is best to store the assembly on a raised surface, such as the top of a box, as shown above and on the far right. The photo on the right shows h
  • Step by step: Stage Tools Where your parts fit 15 06 The feedwater system Feedwater heater body Feedwater heater end A Feedwater heater end B Feedwater heater holder Feedwater heater upper plate 7 screws 2 × 2mm 3 screws 2 × 4mm Phillips screwdriver Multi-purpose adhesive Epoxy adhesive 1 The feedwater heater body has a narrow end and a wide end, as indicated above. Feedwater heater end B goes in the wide end and feedwater heater end A fits into the narr
  • 16 4 3 To avoid the screwdriver damaging any of the adjacent surfaces, you can cover the shank with masking tape, as shown. If it is hard to tighten screws into any of the six screw holes in the front deck (circled), you can use the screwdriver to remove some of the paint from the surface. Place the two bands of the feedwater heater holder over the feedwater heater. Align the ends of the two bands with the two slots in the front deck. Pass the bands throug
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Build the Steam Locomotive Pack 02

Model Space C57: Related Instructions

Model Space IJN Akagi
De Agostini Model Space IJN Akagi
03.09.2026 32 pages

™ Akagi: Step by Step 201 Pack 7 Tools and materials Wet and dry paper Sandpaper Glue Superglue Putty Tweezers Needle file Knife Double-sided tape Masking tap Operational manual for the De Agostini Model Space IJN Akagi Toy. The document presents interface navigation, support details, configuration options.

Model Space SANTISIMA TRINIDAD
De Agostini Model Space SANTISIMA TRINIDAD
01.09.2026 20 pages

481 SANTISIMA TRINIDAD: Step by Step ™ Retrieve the template from Stage 53 and cut out template B 2. Temporarily fix the template to the side of the second gu Usage and setup manual for the De Agostini Model Space SANTISIMA TRINIDAD Toy. This reference manual outlines security instructions, error codes, connectivity setup.

Model Space MiG-29
De Agostini Model Space MiG-29
19.07.2026 12 pages

PACK 13 PACK 13 Comprehensive user handbook for the De Agostini Model Space MiG-29 Toy. It explains configuration options and device safety checks, compatibility information, usage examples.

Model Space MiG-29
De Agostini Model Space MiG-29
19.07.2026 12 pages

PACK 14 PACK 14 Reference manual for the De Agostini Model Space MiG-29 Toy. The document offers guidance on diagnostic information, device operation tips, application scenarios.

Model Space T-72
De Agostini Model Space T-72
17.06.2026 14 pages

BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 6 SCALE 1:16 User guide for the De Agostini Model Space T-72 Toy. It contains information on product specifications, replacement parts, shutdown procedures.

Model Space T-72
De Agostini Model Space T-72
21.04.2026 12 pages

BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 7 SCALE 1:16 Complete technical documentation for the De Agostini Model Space T-72 Toy. This documentation provides step-by-step guidance on service procedures, technical assistance, safety, wiring diagrams.

Similar Manuals in the Toy Category

12006
Pleo 12006
24.07.2026 27 pages

CAUTION - ELECTRIC PRODUCT. Not recommended for children under 8 years of age. As with all electrical products precautions should be used and observed during ha Official user handbook for the Pleo 12006 Toy. The manual provides technical details on hardware setup, functional overview, operating guidelines, device calibration.

Russian Battle Tank T-90A
REVELL Russian Battle Tank T-90A
31.05.2026 12 pages

® Russian Battle Tank T-90A ©2014 BY REVELL GmbH. A subsidiary of Hobbico, Inc. 03301-0389 PRINTED IN GERMANY Russian Battle Tank T-90A Russian Battle Tank T Technical guide for the REVELL Russian Battle Tank T-90A Toy. It describes operating procedures and operational procedures, repair references, device reset instructions, basic operation.

180 CFX
Blade 180 CFX
28.03.2026 8 pages

Advanced Settings WARNING: To ensure your safety, always disconnect the motor wires from the ESC before performing the following steps. After you have completed Detailed product documentation for the Blade 180 CFX Toy. It provides detailed operation instructions and reset instructions, security instructions, troubleshooting guides, maintenance procedures.

Su-2 exterior
Eduard Su-2 exterior
31.05.2026 4 pages

Su-2 exterior 48 805 1/48 scale detail set for ZVEZDA kit • sada detailů pro model 1/48 ZVEZDA ORIGINAL KIT PARTS PŮVODNÍ DÍLY STAVEBNICE PHOTO-ETCHED PA Technical operation manual for the Eduard Su-2 exterior Toy. The guide offers support information and setup instructions, software installation, hardware setup, user instructions.