De Agostini Model Space T-72 Manuals

10 pdf manual(s) De Agostini Model Space T-72 for free download (Document Types: Manual , Operation & user’s manual)

De Agostini Model Space T-72 Manual  [PDF] (12 pages)

  • Identifier: id-1890287
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Control Panel and Interface Navigation, Best Practices for Everyday Use, Critical Operational Precautions
  • UPD Date: 27.04.2026
  • Source File: 1832475.pdf
  • Pages: 12
  • Description: Comprehensive setup guide for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.121 E. Calhoun Street, Woodstock, IL 60098 All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary
  • T-72 TANK: STAGE 107 45 PARTS For this stage, you will need all the parts received, as well as the lower hull, a screwdriver, a wooden board, a small hammer and the track. 1 1. Volume control 2. Screws (2 pcs) 3. Treads (5 pcs) 4. Pins (5 pcs) THE VOLUME CONTROL AND TRACK With this stage, you receive more pins and treads, as well as another part of the electrical system of your model, the volume control, which allows you to increase or decrease the loudnes
  • 108 The switches, volume control and speaker will be housed inside the lower hull. Place the volume control onto the two posts, in the position shown. Tighten one of the screws into the circled hole. Tighten the second screw into the other hole. Remember that circuit boards are fragile, so be very careful when tightening the screws. Push a pin into the aligned holes. To adjust the volume, insert a flat-head screwdriver into the groove in the control, visib
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 9 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (12 pages)

  • Identifier: id-1890276
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: FAQ Section for Common Queries, Risk Mitigation and Accident Prevention, Initial Startup Checklist
  • UPD Date: 10.04.2026
  • Source File: 1832486.pdf
  • Pages: 12
  • Description: Professional user manual for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may var
  • T-72 TANK: STAGE 133 56 PARTS For this stage, you will need the LED box, the diorama assembly (Stage 54), the turret, the turret base, cables (Stage 40) and a screwdriver. 1 1. LED box THE DIORAMA LED BOX With this stage, you receive the final part of the diorama – the LED box, which illuminates when ‘hit’ by the tank. When turned on, the four LEDs should light up, indicating that the diorama is ready for operation. When fired on by the tank, the LED
  • 134 Connect the diorama speaker to the LED box, by joining their wires together. Then fit both parts together, as shown, positioning the wires in the space between the two parts. Place the building front onto the assembly, and fix the parts together with the six screws (Stage 52). To use the diorama, place four AA batteries into the battery box, and then turn it on. Take the two wires labelled P and R, and insert them into the corresponding sockets on the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 11 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (12 pages)

  • Identifier: id-1890277
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Hardware Setup Instructions, Step-by-Step Assembly Procedures, Environmental Factors and Restrictions
  • UPD Date: 23.06.2026
  • Source File: 1832485.pdf
  • Pages: 12
  • Description: Comprehensive instruction manual for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.121 E. Calhoun Street, Woodstock, IL 60098 All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary
  • T-72 TANK: STAGE 81 34 PARTS 1. Road wheel inner 2. Road wheel outer 3. Suspension arm 4. Washer 5. Split washer 6. Nut 7. Wheel cap 8. Axle bolt 9. Washer screw 10. Spring 11. Treads (5 pcs) 12. Pins (5 pcs) 13. Screws (2 pcs) 14. Fourth stowage pannier (with rear fender) For this stage, you will need the hull, a screwdriver, the two screws and the fourth stowage pannier from this stage, and the two rails from Stage 15. 1 THE FOURTH STOWAGE PANNIER With t
  • 82 Align the pins on the underside of rail 1 with the two circled holes in the hull. Fit the pins into the holes and push the rail into place. Align the pins on the underside of rail 2 with the corresponding holes in the hull. Fit the pins into the holes and push the rail into place. Turn the hull over and place the two screws into the circled holes. Align the posts on the underside of the fourth stowage pannier with the indicated holes in the hull. Tighte
  • T-72 TANK: STAGE 83 35 PARTS For this stage, you will need the gun barrel (Stage 2), the long LED (Stage 33), the mantlet cover upper, the LED from this stage, as well as treads and pins (Stage 34), screws, a small hammer, a screwdriver, a wooden board, the track section and a length of wire with a hooked end. The wire should be long enough and thin enough to be inserted into the gun barrel. If the LED is loose in the hole, you can secure it with a small d
  • 84 Cut threads in the circled holes in the mantlet cover upper by tightening the two screws into them. You can leave the screws in the holes to prevent them getting lost. Unwind the long LED and carefully straighten it out in front of you. Insert the length of wire into the base of the LED. This will allow you to manoeuvre it through the gun more easily. Push the LED along the gun barrel. Connect the new section of track to your exisitng section with a pin
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 7 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (14 pages)

  • Identifier: id-1890279
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Storage and Care Recommendations, Pre-Installation Safety Requirements, System Architecture and Design Overview
  • UPD Date: 16.07.2026
  • Source File: 1832483.pdf
  • Pages: 14
  • Description: Installation and maintenance guide for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.121 E. Calhoun Street, Woodstock, IL 60098 All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary
  • T-72 TANK: STAGE 93 39 PARTS 1. Gun barrel rotor 2. Screws For this stage, you will need the gun barrel rotor, the turret, the gun barrel, the spring, screws and a screwdriver. 1 THE GUN BARREL ROTOR With this stage, you receive the electric rotor that will enable you to adjust the height of the gun. It is a key component of the combat system of your T-72.
  • 94 Align the holes in the side of the rotor with the circled posts on the underside of the turret. Lower the rotor into place. Insert the three screws received with this stage into the three holes in the rotor. Tighten the screw at the rear into place. Insert the tab at the rear of the recoil mechanism into the hole in the front of the rotor. Then tighten the other two screws into place. The spring will hold the recoil mechanism away from the turret until
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 8 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (14 pages)

  • Identifier: id-1890280
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Hardware Setup Instructions, Step-by-Step Assembly Procedures, Routine Functionality Testing
  • UPD Date: 21.03.2026
  • Source File: 1832482.pdf
  • Pages: 14
  • Description: Professional manual for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.121 E. Calhoun Street, Woodstock, IL 60098 All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary
  • T-72 TANK: STAGE 15 06 TRACK TREADS PARTS The parts supplied with this stage are for the running gear, including more treads and pins, and the front right fender. The six running gears along each side all have independent suspension. This stage shows you how to connect the track treads. 1. Road wheel inner 2. Road wheel outer 3. Front right fender 4. Treads and pins (5 pcs.) 5. Suspension arm 6. Hub cap 7. Spring 8. Axle bolt 9. Nut 10. Washer 11. Split
  • 16 Before assembling the treads, make sure that they fit together, as shown above, and that the holes in both parts align to allow the pin to pass through. With the holes in the treads aligned, insert the smooth end of the pin into the hole. Hold the treads together and slowly push the pin through the holes. To get the pin all the way into the treads, lightly tap it with your hammer until it is fully inserted. Repeat Steps 4 to 8 to attach a third tread to
  • T-72 TANK: STAGE 17 07 THE TURRET BASE PARTS With this stage, you have received the turret base. The six large posts on the base engage with holes in the turret, and are secured with screws to create a strong join between the two parts. In this stage, you will fit the side bin (from Stage 3) to the turret base. 1. Turret base 2. Screws (6 pcs.) For this stage, you will need the turret base, the side bin from Stage 3, two screws and a screwdriver. Locate th
  • 18 Locate the corresponding holes (circled) in the bottom of the side bin. Align the holes of the bin with those of the turret base. Insert one of the screws into one of the holes (circled). Use a screwdriver to tighten the screw and hold the bin in position. Don’t overtighten the screw as this may damage the parts. The base and bin should now look like this. Tighten a second screw into the other hole. Again, be careful not to overtighten it. You can now
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 2 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (14 pages)

  • Identifier: id-1890283
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Detailed Installation Instructions, Hardware Verification Checklists, Safety Recommendations and Warnings
  • UPD Date: 10.07.2026
  • Source File: 1832479.pdf
  • Pages: 14
  • Description: Operation guide for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may var
  • T-72 TANK: STAGE 145 61 PARTS Take the spring from one of the road wheel sets, and insert the perpendicular end into the hole in the circled recess. Place the suspension bar over the spring, turning it clockwise until the stopper is positioned to the right of the one on the hull, then pass the axle bolt through the hole in the bar. Secure the bolt by placing a washer, a split washer and a nut onto the free end on the inside of the lower hull. Hold the nut
  • 146 Place the two halves of the road wheel onto the bar, and secure them with a washer screw. Finally, press the hub cap into the recess in the centre of the wheel. You will need to remove the battery compartment panel to access these three holes. Fit the remaining suspension bars to the holes, as in Step 2. Then fit the remaining wheels and hub caps onto them. The generated exhaust ‘smoke’ will pass through the hole in the rear of the lower hole, circ
  • T-72 TANK: STAGE 147 62 PARTS For this stage, you will need the lower hull, the rollers (Stage 29), the IR receiver board (Stage 38), the battery compartment panel (Stage 46) and a screwdriver. 1 1. Motor 2. Screws (2 pcs.) DRIVE MOTOR With this stage, you receive the second of the two motors that will power the tank’s transmission system. You will fit three rollers, the receiver board and the battery compartment panel, if you haven’t already.
  • 148 Fit the first roller into the hole near the top of the lower hull, at the front. Secure the roller with a screw from the inside of the lower hull. Fit the other two rollers in the same way. Place the IR receiver board onto the two indicated posts, aligning the holes of both parts. Insert the two hinge tabs at one end of the battery compartment panel into the corresponding holes in the hull. Half-tighten a screw into one of the holes. Be careful, becaus
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 12 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (14 pages)

  • Identifier: id-1890275
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Warranty and Service Information, Recommended Spare Parts List, Operational Mode Explanations
  • UPD Date: 13.03.2026
  • Source File: 1832487.pdf
  • Pages: 14
  • Description: Technical operation manual for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.121 E. Calhoun Street, Woodstock, IL 60098 All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary
  • T-72 TANK: STAGE 67 28 PARTS 1. Road wheel inner 2. Road wheel outer 3. Suspension arm 4. Washer 5. Split washer 6. Nut 7. Wheel cap 8. Axle bolt 9. Washer screw 10. Spring 11. Treads (5 pcs) 12. Pins (5 pcs) 13. Second stowage pannier 14. Screws (2 pcs) Align the posts on the underside of the pannier with the two corresponding holes in the hull. 2 In this stage, along with the second stowage pannier, the screws, and the treads and pins, you will need a sm
  • 68 Push the pannier into place. Turn the hull over, holding the pannier in place, and insert a screw into the circled hole. Tighten the screw into place. Insert the second screw into the circled hole behind the first. Push the pin through the aligned holes to join the two sections together. Tighten the screw into the hole. Place the track on its side, and hammer the pins into place. Assemble the five new treads to create a track section. Align this new sec
  • T-72 TANK: STAGE 69 29 PARTS 1. Left front skirt 2. Left rear skirt 3. Washer screws (9 pcs) 4. Bracket 5. Rollers (3 pcs) 6. Treads (5 pcs) 7. Pins (5 pcs) For this stage, you will need the hull, the two right skirts, screws and a screwdriver. 1 THE RIGHT SKIRT With this stage, you receive the two left skirts, which will be mounted on the left side of the hull, plus three rollers, a bracket, and more pins and treads. You will be fitting the two right skir
  • 70 Before starting, tap the holes in the posts on the inside of the two right skirt pieces. Take the right rear skirt and align the three posts on the inside with the three corresponding holes in the external fuel tank (circled). Push the posts of the skirt into the holes, then insert a washer screw into each hole from the inside of the hull. Tighten the three screws into place. Insert a washer screw into both holes from the inside of the hull. Align the t
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 6 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (12 pages)

  • Identifier: id-1890285
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Warranty and Service Information, Risk Mitigation and Accident Prevention, Technical Data and Parameters
  • UPD Date: 25.04.2026
  • Source File: 1832477.pdf
  • Pages: 12
  • Description: Detailed operating instructions for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.121 E. Calhoun Street, Woodstock, IL 60098 All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may vary
  • T-72 TANK: STAGE 29 12 THE HULL (CONTINUED) PARTS The parts supplied with this stage are a third road wheel, the second external fuel tank, and more treads and pins. You will now be fitting the second external fuel tank to the hull, so keep the other parts to one side until you need them at a later stage. 1. Road wheel inner 2. Road wheel outer 3. Suspension arm 4. Pins (5 pcs) 5. Treads (5 pcs) 6. Second external fuel tank 7. Contact wheel screw 8. Axle b
  • 30 Locate the two circled holes in the hull, behind the first external fuel tank. Push the posts on the underside of the fuel tank into the holes in the hull. This is how it should look from underneath. Insert one of the screws into the circled hole. Tighten the second screw into the hole, then go back and fully tighten the first one. Half-tighten the screw into the hole. Here’s how the underside should now look. Insert the second screw into the other ho
  • T-72 TANK: STAGE 31 13 THE GLACIS PLATE PARTS With this stage, you have received six screws, five treads and pins, and the glacis plate, which is the main armour on the front of the real tank’s hull. Throughout the T-72’s long career, the glacis plate has been revised and improved a number of times, to change the thickness and distribution of the armour. 1. Glacis plate 2. Treads (5 pcs) 3. Screws (6 pcs) 4. Pins (5 pcs) To fit the glacis plate, you wi
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 3 SCALE 1:16

De Agostini Model Space T-72 Manual  [PDF] (14 pages)

  • Identifier: id-1890286
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Cleaning and Sanitization Methods, Operational Mode Explanations, Emergency Shutdown Procedures
  • UPD Date: 08.05.2026
  • Source File: 1832476.pdf
  • Pages: 14
  • Description: Quick start guide for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2017 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may var
  • T-72 TANK: STAGE 119 50 PARTS For this stage,you will need the parts supplied, as well as the lower hull, a screwdriver, a wooden board, a small hammer and the track. 1 1. Smoke generator switch 2. Screws 3. Treads (5 pcs.) 4. Pins (5 pcs.) THE SMOKE GENERATOR SWITCH With this stage, you receive the switch to turn the smoke generator on and off. This will start the process that heats up the smoke liquid, which is then discharged through the tube at the rea
  • 120 Insert the smoke generator switch into the slot located next to the rear of the battery box. Insert a screw into the circled hole. Carefully tighten the screw until it is holding the switch board to the post. Don’t overtighten, as that can break the board. Insert the second screw into the other hole in the board. Engage the new section with the end of your existing track. Carefully tighten the second screw. Place the track on its side and hammer the
  • T-72 TANK: STAGE 121 51 PARTS To keep the liquid in the container from evaporating, remove the precision nozzle and place the cap over the bottle nozzle, as shown. You can choose to prepare the bottle containing the smoke liquid now, or later when it will be used. Use side cutters to remove the tip of the bottle nozzle. For this stage, you will need the parts supplied, the lower hull, side cutters, a screwdriver, and the wheel parts received in Stage 6. Pl
  • 122 Now begin fitting the road wheels.Take the spring from the road wheel set and insert the perpendicular end into the hole in the recess indicated by the arrow. Place the suspension bar over the spring, as shown. Turn the suspension bar clockwise until the stopper is positioned to the right of the one on the hull, as indicated. Now pass the axle bolt through the hole in the bar. Secure the bolt by placing a washer onto the free end on the inside of the l
Document Preview & Text Transcription (Main Page)
Click to expand and read text
BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 10 SCALE 1:16

De Agostini Model Space T-72 Operation & user’s manual [PDF] (18 pages)

  • Identifier: id-1890284
  • Brand: De Agostini
  • Device: Model Space T-72 Toy
  • Type: PDF
  • Key Aspects: Model Variations and Compatibility, Additional Modules and Accessories Guide, Emergency Shutdown Procedures
  • UPD Date: 24.03.2026
  • Source File: 1832478.pdf
  • Pages: 18
  • Description: Full operation manual for the De Agostini Model Space T-72.
Pages Preview:
  • CONTENTS Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc.,121 E. Calhoun Street, Woodstock, IL 60098. All rights reserved © 2018 Warning: Not suitable for children under the age of 14. This product is not a toy and is not designed or intended for use in play. Items may var
  • TANK T-72 GUIDE 3 RC MODEL Т‑72 ТANK Close-up image of the tracks, which are assembled from individual metal treads. Metal tracks make the tank look more real, as well as serving the practical purpose of being stronger and therefore greatly increasing control and longevity. Overview The creators of your radio- controlled T-72 model made it as realistic as possible, even down to the choice of materials. Many parts of your T-72, such as the turret, are m
  • 4 Functions The standard version of the model is controlled by a remote control unit, operating at a frequency of 2.4GHz. The remote allows you to control the speed at which the tank moves forward and back, turn left and right, rotate the tower, as well as raise and lower the gun. To achieve the most realistic effect when “firing” the gun, the barrel recoils, just as it would on the real tank. At the same time, the LED placed inside the barrel produces
Document Preview & Text Transcription (Main Page)
Click to expand and read text
TANK T-72 GUIDE 1 BUILD AND DRIVE THE RADIO-CONTROLLED MODEL GUIDE SCALE 1:16

Model Space T-72: Related Instructions

Model Space MiG-29
De Agostini Model Space MiG-29
12.07.2026 14 pages

PACK 4 PACK 4 Complete usage guide for the De Agostini Model Space MiG-29 Toy. The document highlights operating procedures and menu navigation, network setup, security instructions.

Model Space T-72
De Agostini Model Space T-72
30.04.2026 12 pages

BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 11 SCALE 1:16 Comprehensive guide for the De Agostini Model Space T-72 Toy. The manual covers procedures for setup instructions, warranty information, performance details, functional overview.

Model Space T-72
De Agostini Model Space T-72
02.04.2026 14 pages

BUILD AND DRIVE THE RADIO-CONTROLLED MODEL № 6 SCALE 1:16 Product instruction manual for the De Agostini Model Space T-72 Toy. This manual offers stepwise instructions for energy usage, product specifications, testing procedures, setup guidelines.

Model Space Robi Pack 05
De Agostini Model Space Robi Pack 05
30.07.2026 19 pages

Build your own Stages 15-18: Begin building Robi’s left arm 05 Pack Service manual for the De Agostini Model Space Robi Pack 05 Robotics. The documentation guides users through setup and troubleshooting guides, performance details, system setup.

Model Space T-72
De Agostini Model Space T-72
08.04.2026 18 pages

TANK T-72 GUIDE 1 BUILD AND DRIVE THE RADIO-CONTROLLED MODEL GUIDE SCALE 1:16 Official user manual for the De Agostini Model Space T-72 Toy. This manual elaborates on network setup, installation guides, specifications.

Model Space C57
De Agostini Model Space C57
07.09.2026 20 pages

Build the Steam Locomotive Pack 11 Product operation manual for the De Agostini Model Space C57 Toy. It outlines installation and technical guidelines, firmware installation, technical troubleshooting.

Similar Manuals in the Toy Category

Cartronic 715
AUTEC Cartronic 715
23.04.2026 4 pages

RC HELICOPTER BLADERUNNER 2.4 GHz 41715 BEDIENUNGSANLEITUNG INSTRUCTION MANUAL Um eine Beschädigung des Hubschraubers so- wie Verletzungen der spielenden Pe Product usage guide for the AUTEC Cartronic 715 Toy. It includes usage scenarios and basic operation, product safety, system checks.

Bombardier CL-415
MR Aerodesign Bombardier CL-415
01.08.2026 53 pages

1 1 2 2 A A B B Bombardier CL-415 Wing span :80" 04-2018 Building manual Device setup manual for the MR Aerodesign Bombardier CL-415 Toy. The manual includes instructions for application scenarios, hardware components, startup procedures, operating guidelines.

6416
Playskool 6416
27.03.2026 2 pages

User setup guide for the Playskool 6416 Toy. The guide explains setup and connectivity options, product specifications, performance optimization.

Nouvo 1300 EP
Vmar Nouvo 1300 EP
16.04.2026 7 pages

1 Before beginning assembly,please read these intructions thoroughly. INSTRUCTION MANUAL UNDER SAFETY PRECAUTIONS This radio control model is not a toy! It is h Setup instructions for the Vmar Nouvo 1300 EP Toy. It describes operating procedures and software updates, component replacement, installation, menu navigation.