Det-Tronics X5200 Manuals

8 pdf manual(s) Det-Tronics X5200 for free download (Document Types: Instructions manual, Addendum)

Det-Tronics X5200 Instructions manual [PDF] (35 pages)

  • Identifier: id-2023277
  • Brand: Det-Tronics
  • Device: X5200 Fire Alarms
  • Type: PDF
  • Key Aspects: Critical Operational Precautions, Basic Configuration Guidelines, Package Contents and Accessories List
  • UPD Date: 09.09.2026
  • Source File: 2264581.pdf
  • Pages: 35
  • Description: Official operating instructions for the Det-Tronics X5200.
Pages Preview:
  • Table of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . . . . . . 2 Communication . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Data Logging
  • 1 95-8546 17.3 IMPORTANT Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. ATTENTION The X5200, X5200G, and X5200M include the Automatic oi ® (Optical Integrity) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector o
  • 95-8546 2 17.3 The Auxiliary relay has normally open / normally closed contacts, and is configurable for energized or de-energized operation, and latching or non-latching operation. 0 to 20 mA Output A 0 to 20 mA output is available as an option (in addition to the three relays). This option provides a 0–20 mA dc current output for transmitting detector status information to other devices. The circuit can be wired in either an isolated or non-isolated co
  • 3 95-8546 17.3 The detector signals a fault condition when less than half of the detection range remains. This is indicated by the Fault output and is evident by the yellow color of the LED on the face of the detector. See the
  • 95-8546 4 17.3 Quick Fire (High Speed) The Quick Fire (High Speed) feature can be used in conjunction with the TDSA signal processing method. This method overrides TDSA requirements in the event of a sudden and intense signal, such as the result of a flash fire. When Quick Fire is activated, the detector is capable of responding to an intense fire signal in less than 30 milliseconds (0.030 seconds). Using the Quick Fire feature in conjunction with TDSA sig
Document Preview & Text Transcription (Main Page)
Click to expand and read text
17.3 Rev: 4/17 95-8546 Instructions UVIR Flame Detector Series X5200, X5200G, and X5200M

Det-Tronics X5200 Addendum [PDF] (21 pages)

  • Identifier: id-1776573
  • Brand: Det-Tronics
  • Device: X5200 Security Sensors
  • Type: PDF
  • Key Aspects: Device Specifications Overview, Warranty and Service Information, Periodic Inspection Checklists
  • UPD Date: 28.03.2026
  • Source File: 1763702.pdf
  • Pages: 21
  • Description: Installation instructions for the Det-Tronics X5200.
Pages Preview:
  • Table of Contents Interconnecting the HART Communicator with the Detector. . . . . . . . . . 1 HART Device Description Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Detector Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 HART Menu Structure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 X5200 Root
  • 1 95-8636 3.2 Digital communication with the X5200 allows the operator to monitor the status of the detector, determine factory settings, adjust field settings, and initiate field tests. This addendum provides guidance for establishing HART communication, and describes the HART menu structure when using the X5200 with a HART Handheld Communicator, a PC, or other process interface device that supports Device Description Language (DD). NOTE A minimum level o
  • 95-8636 2 3.2 24 VDC 4-20 MA PLC – + 600 Ω MAX* AT 24 VDC – + A2457 9 8 7 6 5 4 3 2 1 19 18 17 16 15 14 13 12 11 4-20 mA + 4-20 mA + REF 4-20 mA – + Vin – Vin 29 28 27 26 25 24 23 22 21 X5200 UVIR DETECTOR Figure 2—X5200 Detector Wired for Non-Isolated 0 to 20 mA Current Output (Sourcing) 24 VDC 4-20 MA PLC – + 600 Ω MAX* AT 24 VDC – + A2459 9 8 7 6 5 4 3 2 1 19 18 17 16 15 14 13 12 11 4-20 mA + 4-20 mA – 4-20 mA – REF + Vin – Vin
  • 3 95-8636 3.2 Multidrop Mode Optical flame detectors are life safety devices and require the 0-20 mA loop for transmitting important detector status data. They should not be used in conjunction with multidrop mode. If multidrop mode is a requirement, the alarm and fault relay contacts must be connected directly to the safety system or fire panel for signalling purposes. note RS-485 Modbus communication is not available on HART equipped models. note This ad
  • 95-8636 4 3.2 HART Menu Structure Command Menu 1) Start Passive Oi 2) Start Active Oi 3) Clear Oi Fault 4) Reset Latches 5) Master Reset 6) Clear Data Log 7) HART Command Menu Hardware Menu 1) Temperature 2) Temp Range Fault 3) Voltage 4) Voltage Fault 5) Manual Oi at Start HART Setup 1) Poll addr 2) Final asmbly num 3) Tag 4) Long tag 5) Date 6) Descriptor 7) Message Real Time Clock 1) RTC Seconds 2) RTC Minutes 3) RTC Hours 4) RTC
Document Preview & Text Transcription (Main Page)
Click to expand and read text
3.2 Rev: 9/16 95-8636 Addendum HART® Communication with the X5200 UVIR Flame Detector

Det-Tronics X5200 Instructions manual [PDF] (34 pages)

  • Identifier: id-1237013
  • Brand: Det-Tronics
  • Device: X5200 Security Sensors
  • Type: PDF
  • Key Aspects: Model Variations and Compatibility, Package Contents and Accessories List, Detailed Installation Instructions
  • UPD Date: 04.07.2026
  • Source File: 921256.pdf
  • Pages: 34
  • Description: Device instruction manual for the Det-Tronics X5200.
Pages Preview:
  • Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 LeD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 optical integrity (oi) . . . . . . . . . . . . . . . . . . . . . . 2 communication . . . . . . . . . . . .
  • Important Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. attEntIon The X5200 includes the Automatic Optical Integrity (oi ®) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operation capabilities. no testing
  • 95-8546 2 8.2 The Auxiliary relay has normally open / normally closed contacts, and is configurable for energized or de-energized operation, and latching or non-latching operation. 0 to 20 mA Output A 0 to 20 mA output is available as an option (in addition to the three relays). This option provides a 0 to 20 mA dc current output for transmitting detector status information to other devices. The circuit can be wired in either an isolated or non-isolated c
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instructions 95-8546 UVIR Flame Detector X5200 8.2 Rev: 6/10 95-8546

Det-Tronics X5200 Instructions manual [PDF] (34 pages)

  • Identifier: id-1867870
  • Brand: Det-Tronics
  • Device: X5200 Security Sensors
  • Type: PDF
  • Key Aspects: Device Specifications Overview, FAQ Section for Common Queries, Common Issue Diagnostic Flows
  • UPD Date: 10.04.2026
  • Source File: 1854892.pdf
  • Pages: 34
  • Description: Complete user documentation for the Det-Tronics X5200.
Pages Preview:
  • DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . . . . . . 2 Communication . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Data Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Integral Wiring Compartment .
  • 1 95-8547 9.2 INSTRUCTIONS UVIR Flame Detector with Pulse Output X5200, X5200G, X5200M IMPORTANT Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. ATTENTION The X5200 includes the Automatic oi ® (Optical Integrity) feature — a calibrated performance test that is automatically per
  • 95-8547 9.2 2 OUTPUTS Relays The detector is furnished with fire and fault relays. The relays are rated 5 amperes at 30 Vdc. The Fire Alarm relay has redundant terminals and normally open / normally closed contacts, normally de-energized operation, and latching or non-latching operation. The Fault relay has redundant terminals and normally open contacts, normally energized operation, and latching or non-latching operation. Latching relays can be reset by r
  • 3 95-8547 9.2 The Mag oi test is performed by placing a magnet by the location marked “MAG OI” on the outside of the detector (see Figure 2). This action causes the detector to immediately send pulses to the controller. Controller response is as follows: • The Zone LED blinks. • The digital display indicates which zone is in alarm. • The status indicator shows “6” (fire). IMPORTANT Mag oi can be performed with the controller’s (R7404/R749
Document Preview & Text Transcription (Main Page)
Click to expand and read text
9.2 Rev: 11/15 95-8547 Instructions UVIR Flame Detector with Pulse Output X5200, X5200G, X5200M

Det-Tronics X5200 Instructions manual [PDF] (35 pages)

  • Identifier: id-1867872
  • Brand: Det-Tronics
  • Device: X5200 Security Sensors
  • Type: PDF
  • Key Aspects: Basic Configuration Guidelines, Regulatory Compliance and Standards, Step-by-Step Assembly Procedures
  • UPD Date: 18.03.2026
  • Source File: 1854890.pdf
  • Pages: 35
  • Description: Professional manual for the Det-Tronics X5200.
Pages Preview:
  • Table of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . . . . . . 2 Communication . . . . . .
  • 1 95-8546 12.1 Important Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. attEntIon The X5200 includes the Automatic oi ® (Optical Integrity) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operation capabiliti
  • 95-8546 2 12.1 The Auxiliary relay has normally open / normally closed contacts, and is configurable for energized or de-energized operation, and latching or non-latching operation. 0 to 20 mA Output A 0 to 20 mA output is available as an option (in addition to the three relays). This option provides a 0 to 20 mA dc current output for transmitting detector status information to other devices. The circuit can be wired in either an isolated or non-isolated
  • 3 95-8546 12.1 The X5200 signals a fault condition when less than half of the detection range remains. This is indicated by the Fault output and is evident by the yellow color of the LED on the face of the detector. See the
  • 95-8546 4 12.1 Quick Fire (High speed) The Quick Fire (High Speed) feature can be used in conjunction with the TDSA signal processing method. This method overrides TDSA requirements in the event of a sudden and intense signal, such as the result of a flash fire. When Quick Fire is activated, the detector is capable of responding to an intense fire signal in less than 30 milliseconds (0.030 seconds). Using the Quick Fire feature in conjunction with TDSA s
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Instructions 95-8546 UVIR Flame Detector X5200 12.1 Rev: 6/13 95-8546

Det-Tronics X5200 Instructions manual [PDF] (33 pages)

  • Identifier: id-1776572
  • Brand: Det-Tronics
  • Device: X5200 Security Sensors
  • Type: PDF
  • Key Aspects: Environmental Factors and Restrictions, Model Variations and Compatibility, Troubleshooting Information
  • UPD Date: 05.06.2026
  • Source File: 1763703.pdf
  • Pages: 33
  • Description: Service and user manual for the Det-Tronics X5200.
Pages Preview:
  • Table of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . . . . . . 2 Communication . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Data Logging
  • 1 95-8788 1.1 IMPORTANT Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. ATTENTION The X5202 includes the Automatic oi ® (Optical Integrity) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operation capabilitie
  • 95-8788 2 1.1 The Auxiliary relay has normally open / normally closed contacts, and is configurable for energized or de-energized operation, and latching or non-latching operation. 0 to 20 mA Output A 0 to 20 mA output is available as an option (in addition to the three relays). This option provides a 0–20 mA dc current output for transmitting detector status information to other devices. The circuit can be wired in either an isolated or non-isolated con
  • 3 95-8788 1.1 The detector signals a fault condition when less than half of the detection range remains. This is indicated by the Fault output and is evident by the yellow color of the LED on the face of the detector. See the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1.1 95-8788 Instructions UVIR Flame Detector X5202

Det-Tronics X5200 Addendum [PDF] (16 pages)

  • Identifier: id-1867915
  • Brand: Det-Tronics
  • Device: X5200 Security Sensors
  • Type: PDF
  • Key Aspects: Routine Functionality Testing, Periodic Inspection Checklists, User Training Recommendations
  • UPD Date: 05.07.2026
  • Source File: 1854847.pdf
  • Pages: 16
  • Description: Technical setup manual for the Det-Tronics X5200.
Pages Preview:
  • Table of Contents DESCRIPTION. . . . . . . . . . . . . . . . . . . . . . . . 1 Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 oi (Optical Integrity) . . . . . . . . . . . . . . . . . 2 GENERAL APPLICATION INFORMATION . . 3 Response Characteristics. . . . . . . . . . . . . 3 Important Application Considerations . . . 3 IMPORTANT SAFETY NOTES . . . . . . . . . . . 3 WIRING PROCEDURE . . . . . . . . . . . . . . . . . 3 Wire Size and Type . .
  • 1 95-8790 1.1 WARNING Be sure to read and understand the entire instruction manual before installing or operating the flame detection system. Any deviation from the recommendations in this manual may impair system performance and compromise safety. ATTENTION The X-Series flame detectors include the Automatic oi ® (Optical Integrity) feature — a calibrated performance test that is automatically performed once per minute to verify complete detector operat
  • 95-8790 2 1.1 OUTPUTS Relays The detectors are furnished with fire and fault relays. The relays are rated 5 amperes at 30 Vdc. The Fire Alarm relay has redundant terminals and normally open / normally closed contacts, normally de-energized operation, and latching or non-latching operation. The Fault relay has redundant terminals and normally open contacts, normally energized operation, and latching or non-latching operation. An alarm condition will normal
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1.1 95-8790 Addendum Det-Tronics X-Series Flame Detectors with Pulse Output

Det-Tronics X5200 Instructions manual [PDF] (20 pages)

  • Identifier: id-1867916
  • Brand: Det-Tronics
  • Device: X5200 Security Sensors
  • Type: PDF
  • Key Aspects: User Training Recommendations, Error Code Explanations, Step-by-Step Assembly Procedures
  • UPD Date: 04.07.2026
  • Source File: 1854846.pdf
  • Pages: 20
  • Description: Detailed product documentation for the Det-Tronics X5200.
Pages Preview:
  • Table Of Contents DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 HARDWARE REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 INSTALLAT
  • DESCRIPTION Det-Tronics X-Series Flame Detectors record pertinent configuration and event information in the device’s non- volatile memory. Important detector status data such as power-up/down, faults and alarms are date and time stamped as they occur and stored in the electronic module located inside the detector enclosure. The Inspector Monitor software allows the user to later upload this data to a personal computer (PC) where it can be displayed, sav
  • 2 95-8751 3.1 NOTE The PC must always be located in a non- hazardous controlled location. Modbus communications are only available on X-series detectors that have Relay, Relay/4-20mA, and Pulse outputs. Modbus communications are not available on X-series detectors that have HART or EQP outputs. NOTE Communication between the sensor module and the PC uses the Modbus RTU protocol, with the sensor module configured as a Modbus slave. Alternate Method NOTE
  • 3 95-8751 3.1 SOFTWARE The Enhanced Flame Inspector software can be run directly from the CD drive or it can be installed onto the hard drive. To install the software onto the hard drive, use the standard Windows procedure to copy the file to a folder. To create an optional shortcut, right click on the file in the folder and click on Create Shortcut. Drag the shortcut icon to the desktop window. Double click on the shortcut icon to run the program. STARTUP
Document Preview & Text Transcription (Main Page)
Click to expand and read text
3.1 95-8751 Instructions Enhanced Flame Inspector Software for use with Det-Tronics X-Series Flame Detectors

X5200: Fire Alarms, Security Sensors Category Related Instructions

ACQUITY
Waters ACQUITY
22.07.2026 116 pages

ACQUITY UPLC H-Class System Guide 715005049 Revision C Copyright © Waters Corporation 2016 All rights reserved Manual for installation and usage of the Waters ACQUITY Water System. This manual outlines installation steps and wiring setup, operating instructions, service contacts.

SpectraMax Paradigm
Molecular Devices SpectraMax Paradigm
31.03.2026 187 pages

5014038 E May 2015 SpectraMax® Paradigm® Multi-Mode Detection Platform User Guide Quick start guide for the Molecular Devices SpectraMax Paradigm Laboratory Equipment. It contains information on configuration options, interface navigation, maintenance procedures.

2506
Algo 2506
04.04.2026 12 pages

Document 90-00082 Algo Communication Products Ltd (604) 454-3792 2017-07-17 4500 Beedie St Burnaby BC Canada Installation instructions for the Algo 2506 Security Sensors. This guide provides information on software installation, safety guidelines, firmware installation, performance details.

STCH-1000
S-Tech STCH-1000
24.07.2026 11 pages

- 1 - OWNERS MANUAL for Models: E163293 RESIDENTIAL GAS DETECTOR STCH-1000 Natural (Methane) Gas Detector, direct plug in. STCH-1000LC Natural (Methane) Gas De Device maintenance guide for the S-Tech STCH-1000 Security Sensors. The manual describes support details, setup, network configuration, maintenance guidelines.