DeWalt DCB1800 Manuals

If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos. 1-800-4-DeWALT Instruction Manual Guide D’utilisation Manual de instrucciones DCB1800 1800 Watt Portable Power Station with Parallel Battery Charger Station d’alimentation portative de 1800 Watts avec chargeur de blocs-piles parallèle Fuente de alimentación portátil de 1800 vatios con cargador de batería paralelo Final page size: 5.5 x 8.5 in.

Device does not operate with portable power station/charger • Consult manufacturer of device for use with modified sine wave. Portable power station/charger does not charge • Check the connection of the extension cord on both ends; be sure female end is securely plugged into Charger-In plug of the portable power station/charger. • Check that electricity is flowing to extension cord using another device (light, tool, etc.). • Remove batteries and reinsert fully into the tool. POWER-OUT MODE How to Turn on Power-Out mode 1) Firmly install 4 charged 20V MAX* batteries 2) Unplug extension cord from Charger-In, if necessary 3) Starting with your tool or device off, plug into Power-Out receptacle 4) Press and Release On/Off button 5) Red side panel LED will illuminate solid red when running properly CHARGER-IN MODE How To Turn on Charger 1) Plug In female end of extension cord (sold separately) to Charger-In Plug 2) Plug male end of extension cord into wall 3) Fully insert 20V MAX* battery(ies) to charge How to read Front Panel LED indicators in Power-Out Mode • Slow flashing yellow (and 10 beeps of 1 second) = low battery • Solid yellow (and 10 beeps of 1 second) = hot battery • 4 yellow scrolling (and two beeps every 30 seconds) = approaching low battery • 2 yellow flashing, alternating (and 10 beeps of 1 second) = system fault WARNING: TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL BEFORE OPERATING PRODUCT. QUICK START GUIDE IS NOT A SUBSTITUTE FOR INSTRUCTION MANUAL. DO NOT EXPOSE TO WATER, RAIN, SNOW, OR ANY TYPE OF MOISTURE. DCB1800 QUICK START GUIDE 2 How to read Front Panel LED indicators in Charger-In Mode • Slow Flashing Red = battery(ies) charging • Solid Red = battery(ies) charged • Quick Flashing Red = hot/cold delay BASIC TROUBLESHOOTING Portable power station/charger does not operate or turn ON when ON/OFF button is pressed • Check that all four batteries have sufficient charge (at least 1 green LED light, ideally 2 or 3 green LED lights on battery fuel gauge, if equipped). • Remove batteries and reinsert fully into the tool. • Check that batteries are within operating temperature (solid yellow light will illuminate if battery overtemp condition). • Be sure nothing is plugged into "Charger-In" plug. 3 1 Portable power station/charger turns off during high power operation • Check to make sure load does not exceed capacity of portable power station/charger (15 amps). If it trips a 15 amp circuit breaker, it will likely trip the portable power station/charger. • Try using four of the same, premium (3.0Ah or greater) batteries fully charged. Compact (2.0Ah or less) batteries may not provide the output needed for high power operation. View other Power Tools made by DeWalt Tools on our website.

Device does not operate with portable power station/charger • Consult manufacturer of device for use with modified sine wave. Portable power station/charger does not charge • Check the connection of the extension cord on both ends; be sure female end is securely plugged into Charger-In plug of the portable power station/charger. • Check that electricity is flowing to extension cord using another device (light, tool, etc.). • Remove batteries and reinsert fully into the tool. POWER-OUT MODE How to Turn on Power-Out mode 1) Firmly install 4 charged 20V MAX* batteries 2) Unplug extension cord from Charger-In, if necessary 3) Starting with your tool or device off, plug into Power-Out receptacle 4) Press and Release On/Off button 5) Red side panel LED will illuminate solid red when running properly CHARGER-IN MODE How To Turn on Charger 1) Plug In female end of extension cord (sold separately) to Charger-In Plug 2) Plug male end of extension cord into wall 3) Fully insert 20V MAX* battery(ies) to charge How to read Front Panel LED indicators in Power-Out Mode • Slow flashing yellow (and 10 beeps of 1 second) = low battery • Solid yellow (and 10 beeps of 1 second) = hot battery • 4 yellow scrolling (and two beeps every 30 seconds) = approaching low battery • 2 yellow flashing, alternating (and 10 beeps of 1 second) = system fault WARNING: TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL BEFORE OPERATING PRODUCT. QUICK START GUIDE IS NOT A SUBSTITUTE FOR INSTRUCTION MANUAL. DO NOT EXPOSE TO WATER, RAIN, SNOW, OR ANY TYPE OF MOISTURE. DCB1800 QUICK START GUIDE 2 How to read Front Panel LED indicators in Charger-In Mode • Slow Flashing Red = battery(ies) charging • Solid Red = battery(ies) charged • Quick Flashing Red = hot/cold delay BASIC TROUBLESHOOTING Portable power station/charger does not operate or turn ON when ON/OFF button is pressed • Check that all four batteries have sufficient charge (at least 1 green LED light, ideally 2 or 3 green LED lights on battery fuel gauge, if equipped). • Remove batteries and reinsert fully into the tool. • Check that batteries are within operating temperature (solid yellow light will illuminate if battery overtemp condition). • Be sure nothing is plugged into "Charger-In" plug. 3 1 Portable power station/charger turns off during high power operation • Check to make sure load does not exceed capacity of portable power station/charger (15 amps). If it trips a 15 amp circuit breaker, it will likely trip the portable power station/charger. • Try using four of the same, premium (3.0Ah or greater) batteries fully charged. Compact (2.0Ah or less) batteries may not provide the output needed for high power operation.