Diamond Systems Helios Manuals

Helios FastStart Guide 7461010 Rev A Page 1 of 8 Diamond Systems Helios Single Board Computer FastStart Guide DSC Document #7461030 Rev A Diamond Systems Corp. (650) 810-2500 www.diamondsystems.com This document describes a series of quick steps to bring up and verify correct operation of your new Helios PC/104 single board computer (SBC). All the elements you need are provided in the Helios Development Kit (Diamond Systems #DK-HLV800A-01). Once you have your Helios SBC up and running, you can make further adjustments using additional elements that you supply. The steps involve unpacking and identifying each part in the Helios Development Kit, attaching a minimum subset of cables required to verify operation, and powering the board. Quick List of Assembly Steps 1. Install the IDE FlashDisk module with bootable Linux binary on primary IDE connector J12 2. Install the VGA cable 6981084 and monitor on connector J10 3. Connect the keyboard and mouse a. For PS/2 connections install combination cable 6981083 on connector J3 then connect a PS/2 keyboard and mouse b. For USB connections install USB cable 6981082 on connector J15 for USB ports 0/1 or on connector J16 for USB ports 2/3 and connect a USB keyboard and mouse 4. Connect the AC Adapter to the power connector J4 5. Turn on the monitor and plug in the AC Adapter. The Helios board will boot to a Linux prompt.

HELIOS SINGLE BOARD COMPUTER PC/104 SBC with Vortex Processor and Integrated Data Acquisition Rev B9: January 2016 Revision Date Comment B 5/15/2009 Major update B1-8 2/23/2012 Minor corrections; removed 300MHz models B9 1/4/2016 Updated power consumption Copyright 2016 FOR TECHNICAL SUPPORT Diamond Systems Corporation PLEASE CONTACT: 555 Ellis Street Mountain View, CA 94043 USA [email protected] Tel 1-650-810-2500 Fax 1-650-810-2525 www.diamondsystems.com