Elesa DD52R-E Manuals

3 pdf manual(s) Elesa DD52R-E for free download (Document Types: User manual manual, Operating instructions manual)

Elesa DD52R-E User manual manual [PDF] (30 pages)

  • Identifier: id-1578164
  • Brand: Elesa
  • Device: DD52R-E Touch Panel
  • Type: PDF
  • Key Aspects: Regulatory Compliance and Standards, Environmental Factors and Restrictions, Package Contents and Accessories List
  • UPD Date: 24.05.2026
  • Source File: 1423109.pdf
  • Pages: 30
  • Description: Installation and operation manual for the Elesa DD52R-E.
Pages Preview:
  • EN DD52R-E Direct drive electronic position indicators Models all rights reserved in accordance with the law. Always mention the source 1. Safety Instructions The product has been designed and manufactured in accordance with the current regulations. The product leaves the factory ready for use and complies with the safety standards. To maintain the product in this state, it is necessary that it is assembled and used properly, in the closest compliance wit
  • DD52R-E Direct drive electronic position indicators n accordance with the law. Always mention the source when reproducing our drawings. EN 2. System description DD52R-E position indicators, with battery power supply, can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component. Mechanical and electrical characteristics Power supply Lithium battery CR2477 3.0 V Battery life 8
  • EN DD52R-E Direct drive electronic position indicators Models all rights reserved in accordance with the law. Always mention the source 3. Assembly 1. Drill a Ø 6x10 mm hole in the body of the machine with a 30 mm centre distance from the shaft to fit the rear referring pin. 2. Fit the indicator onto the shaft and make sure that the referring pin fits into the hole. 3. Clamp the bushing to the shaft by tightening the grub screw with hexagon socket a
  • DD52R-E Direct drive electronic position indicators n accordance with the law. Always mention the source when reproducing our drawings. EN 5. Symbols on the display 1. Absolute / incremental mode 2. Battery 3. Unit of measure (mm/inch/degrees) 4. Target position indications 6. Key function FUNCTION KEY Operating mode Programming mode Access to the programming mode Parameter selection / Confirm of parameter change Displaying target position / Distance
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Direct drive electronic position indicators 2.0 Software Version Instruction for use pag. 2 DD52R-E EN Instrukcja obsługi str. 16 PL

Elesa DD52R-E User manual manual [PDF] (72 pages)

  • Identifier: id-1777652
  • Brand: Elesa
  • Device: DD52R-E Measuring Instruments
  • Type: PDF
  • Key Aspects: Initial Startup Checklist, Additional Modules and Accessories Guide, Recommended Spare Parts List
  • UPD Date: 05.07.2026
  • Source File: 1762623.pdf
  • Pages: 72
  • Description: Technical setup manual for the Elesa DD52R-E.
Pages Preview:
  • 2 IT DD52R-E Indicatori di posizione elettronici a comando diretto Proprietà dei modelli riservata ai termini di legge. Di 1. Istruzioni di sicurezza Il prodotto è stato progettato e costruito in conformità alle normative vigenti. Il prodotto esce dalla fabbrica pronto per l’uso e conforme alle norme di sicurezza. Per mantenere il prodotto in questo stato, è necessario che esso venga installato ed utilizzato in modo corretto, nella più stretta osse
  • 3 DD52R-E Indicatori di posizione elettronici a comando diretto ge. Disegni e immagini non riproducibili se non citando la fonte. IT Caratteristiche Meccaniche - Elettriche Alimentazione Batteria al litio CR2477 3.0 V Autonomia 8 anni Display LCD con 6 cifre di altezza 12 mm e caratteri speciali Scala di lettura -199999; 999999 Numero cifre decimali programmabile (1) Unità di misura mm, pollici, gradi programmabile (1) Velocità massima di rotazione 300/6
  • 4 IT DD52R-E Indicatori di posizione elettronici a comando diretto Proprietà dei modelli riservata ai termini di legge. Di 3. Installazione 1. Eseguire un foro Ø 6x10 mm di profondità nel corpo della macchina con interasse 30 mm dall’albero per l’alloggiamento del piolino posteriore di riferimento. 2. Montare l’indicatore sull’albero e verificare che il piolino di riferimento entri nel foro predisposto. 3. Fissare la boccola all’albero s
  • 5 DD52R-E Indicatori di posizione elettronici a comando diretto ge. Disegni e immagini non riproducibili se non citando la fonte. IT 5. Simboli visualizzati sul display 1. Modalità assoluta / incrementale 2. Batteria 3. Unità di misura (mm / inch / gradi) 4. Raggiungimento posizione target 6. Funzione dei tasti FUNZIONE TASTO Modalità di lavoro Modalità di programmazione Accesso alla modalità di programmazione Selezione parametro / Conferma modi
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Software 2.0 DD52R-E INSTRUCTIONS FOR USE EN 16 MODE D’EMPLOI FR 30 ISTRUZIONI D’USO IT 2 BETRIEBSANLEITUNG DE 44 INSTRUCCIONES DE USO ES 58

Elesa DD52R-E Operating instructions manual [PDF] (26 pages)

  • Identifier: id-1900637
  • Brand: Elesa
  • Device: DD52R-E Measuring Instruments
  • Type: PDF
  • Key Aspects: Periodic Inspection Checklists, Risk Mitigation and Accident Prevention, Technical Support and Resource Links
  • UPD Date: 21.05.2026
  • Source File: 1822124.pdf
  • Pages: 26
  • Description: Installation and maintenance guide for the Elesa DD52R-E.
Pages Preview:
  • 2 DE DD52R-E (GN 9053) - DD52R-E-RF (GN 9153) Modelle, alle Rechte vorbehalten in Übereinstimmung mit dem Gesetz. Bei Reproduktion der Zeichnungen, bitte immer Quellenangabe. Contents 1. Safety Instructions 4 1.1 Release Information 5 2. System description 6 2.1 Wireless de
  • 3 DE DD52R-E (GN 9053) - DD52R-E-RF (GN 9153) Modelle, alle Rechte vorbehalten in Übereinstimmung mit dem Gesetz. Bei Reproduktion der Zeichnungen, bitte immer Quellenangabe. 8. Programming mode 16 8.1 Programming parameters with numeric values 16 8.2 Device parameters (in alphabetic order) 17 8.3 Main menu tree 18 8.
  • 4 DE DD52R-E (GN 9053) - DD52R-E-RF (GN 9153) Modelle, alle Rechte vorbehalten in Übereinstimmung mit dem Gesetz. Bei Reproduktion der Zeichnungen, bitte immer Quellenangabe. 1 Safety Instructions The product has been designed and manufactured in accordance with the current regulations. The product leaves the factory ready for use and complies with the safety standards. To maintain the product in this state, it is necessary that it is assembled and used
  • 5 DE DD52R-E (GN 9053) - DD52R-E-RF (GN 9153) Modelle, alle Rechte vorbehalten in Übereinstimmung mit dem Gesetz. Bei Reproduktion der Zeichnungen, bitte immer Quellenangabe. Maintenance / Repair Switch off the power supply of the equipment before any action. Maintenance should be performed by trained and authorised staff only. Do not open or modify the case of the indicator. Tampering with this product may endanger the correctness and accuracy of its ope
  • 6 DE DD52R-E (GN 9053) - DD52R-E-RF (GN 9153) Modelle, alle Rechte vorbehalten in Übereinstimmung mit dem Gesetz. Bei Reproduktion der Zeichnungen, bitte immer Quellenangabe. 2 System description The electronic position indicators DD52R-E, with battery power supply, can be used on passing through shafts in any position to provide the reading of the absolute or incremental positioning of a machine component. Mechanical and electrical characteristics Power
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DD52R-E (GN 9053)* DD52R-E-RF (GN 9153)* *(Product series valid only for Germany) Electronic position indicators OPERATING INSTRUCTIONS

DD52R-E: Related Instructions

DD51-E
Elesa DD51-E
15.05.2026 30 pages

Direct drive electronic position indicators 2.0 Software Version Instruction for use pag. 2 DD51-E EN Instrukcja obsługi str. 16 PL Official installation manual for the Elesa DD51-E Touch Panel. This manual explains user preferences, device reset instructions, network setup.

MPI-15
Elesa MPI-15
25.07.2026 32 pages

ITA ENG FRA DEU MANUEL D’UTILISATION Système magnétique de mesure linéaire et angulaire MPI-15 OPERATING INSTRUCTIONS Magnetic length and angle measuring s Comprehensive operating guide for the Elesa MPI-15 Measuring Instruments. It explains troubleshooting and regulatory notices, troubleshooting tips, energy usage.

DD52R-E
Elesa DD52R-E
19.08.2026 72 pages

Software 2.0 DD52R-E INSTRUCTIONS FOR USE EN 16 MODE D’EMPLOI FR 30 ISTRUZIONI D’USO IT 2 BETRIEBSANLEITUNG DE 44 INSTRUCCIONES DE USO ES 58 Instructions for safe usage of the Elesa DD52R-E Measuring Instruments. The document contains system configuration, reset instructions, software configuration, hardware instructions.

DD52R-E
Elesa DD52R-E
23.07.2026 26 pages

DD52R-E (GN 9053)* DD52R-E-RF (GN 9153)* *(Product series valid only for Germany) Electronic position indicators OPERATING INSTRUCTIONS Device user manual for the Elesa DD52R-E Measuring Instruments. The guide explains operation and software updates, detailing setup, device overview.

DD52R-E-RF
Elesa DD52R-E-RF
29.08.2026 17 pages

Electronic position indicators OPERATING INSTRUCTION DD52R-E-RF User instruction manual for the Elesa DD52R-E-RF Measuring Instruments. This guide explains technical procedures for product safety, shutdown procedures, device calibration, safety guidelines.

DD51-E
Elesa DD51-E
01.07.2026 44 pages

Versione Software 2.0 ISTRUZIONI D’USO DD51-E INSTRUCTIONS FOR USE MODE D’EMPLOI EN pag. 16 FR pag. 30 IT pag. 2 Device guide for the Elesa DD51-E Industrial Equipment. It includes maintenance procedures and installation procedures, troubleshooting, assembly reference, operating instructions.

Similar Manuals in the Measuring Instruments, Touch Panel Category

PM-6000
PRAXSYM PM-6000
01.06.2026 20 pages

Device maintenance guide for the PRAXSYM PM-6000 Measuring Instruments. The manual covers procedures for system setup, internal layout, control functions, installation guides.

SGE-25
Aplisens SGE-25
26.07.2026 16 pages

USER’S MANUAL HYDROSTATIC LEVEL PROBES SGE-25, SGE-25/Hastelloy, SGE-25S, SGE-25C, SGE-16 EN.IO.SGE SEPTEMBER 2021 APLISENS S.A., 03-192 Warsaw, Morelowa 7 St Comprehensive setup guide for the Aplisens SGE-25 Measuring Instruments. The guide covers usage and security instructions, operational safety, operating modes.

BC 1060
Met One BC 1060
10.08.2026 57 pages

BC 1060-9800 Rev B Page 1 Met One Instruments, Inc. 1600 NW Washington Blvd. Grants Pass, OR 97526 Telephone: (541) 471-7111 Facsimile: (541) 471-7116 www.met Usage and setup manual for the Met One BC 1060 Measuring Instruments. It details operating modes and operation, wiring diagrams, user instructions, support details.

Power Xpert
Eaton Power Xpert
11.03.2026 8 pages

Effective October 2009 PXM 2250 PXM 2260 IQ 250 IQ 260 Quick Start Guide IL02601011E Power Xpert® Meter 2000 Gateway Card Kit Table of Contents Remove the Mete Detailed operating instructions for the Eaton Power Xpert Gateway. It explains troubleshooting and technical troubleshooting, safety, installation guides, functional overview.