EMC VNX5300 Block Manuals

EMC ® VNX ™ VNX5300™ Block Installation Guide P/N 300-012-924 REV 04

EMC® VNX5300™ Hardware Information Guide 1 The EMC VNX series implements a modular architecture that integrates hardware components for Block, File, and Object with concurrent support for native NAS, iSCSI, Fiber Channel, and Fibre Channel over Ethernet (FCoE) protocols. The VNX series is based on Intel® Xeon®-based PCI Express 2.0 processors and delivers File (NAS) functionality via two to eight Data Movers and Block (iSCSI, FCoE, and FC) storage via dual storage processors using a full 6-Gb/s SAS disk drive topology. This guide describes one of five models available in the VNX series, the VNX5300. The VNX5300 is a mid-range/entry level storage platform. It offers Block services, File services, or Unified Block and File services. These services consist of: ◆ Block-only—Includes a disk processor enclosure (DPE), a 1.2 KW standby power supply (SPS), and disk-array enclosures (DAEs) for holding hard disk drives that are integrated to facilitate Fibre Channel, Fibre channel over Ethernet (FCoE), and iSCSI Block services to Windows® and UNIX® hosts. ◆ File-only—Adds Data Mover enclosure (DME) and Control Station (CS) hardware to the SPE, SPS, and DAEs to facilitate file services to CIFS/NFS clients. ◆ Unified Block and File—Uses same hardware as the File-only configuration but adds FC, iSCSI, and FCoE I/O connectivity to provide Block services to host simultaneously so as to provide File services to clients. The VNX5300 platform supports two types of DPEs and DAEs; a 15 drive 3.5-inch disk 3U enclosure and a 25 drive 2.5-inch disk 2U enclosure. Expansion of up to seven 3U DAEs (a maximum of 120 3.5-inch disk drives) or up to four 2U DAEs (a maximum of 125 2.5-inch disk drives) is supported. IMPORTANT ! When calculating the number of drives for your VNX5300 platform, the DPE is included in the total drive quantity of 125 drives. If the total drive quantity exceeds 125, you will not be able to add another DAE. Topics covered include: ◆ About this document...................................................................................................... 2 ◆ Overview.......................................................................................................................... 3 ◆ System component description..................................................................................... 9 ◆ I/O modules .................................................................................................................. 41 ◆ Disk-array enclosure expansion.................................................................................. 57 ◆ Specifications ................................................................................................................. 73 ◆ Cabling............................................................................................................................ 75 EMC® VNX5300™ Hardware Information Guide

P/N 300-011-668 Rev A01 Installation Guide EMC® VNX5300™ System

This guide describes one of five models available in the VNX Series, the EMC® VNX5300™. This document provides an overview of the architecture, components, and features of the VNX5300 platform. The specific aspects of the VNX5300 platform and its major components include the front and rear connectors and LED indicators on the 3U, 15 (3.5-inch) or 3U, 25 (2.5-inch) disk processor enclosure (DPE), the 1U standby power supply (SPS), the 1U Control Station, the 2U Data Mover Enclosure (DME), and the 3U, 15 (3.5-inch) or the 2U, 25 (2.5-inch) disk drive disk-array enclosure (DAE). This guide is available online at https://mydocs.emc.com/VNX/. Go to the About VNX section, and then select Learn about VNX. Next, follow the steps in the wizard. Topics include: ◆ Product software and hardware release revisions ...................................................... 2 ◆ Revision history ........................................................................................................ 2 ◆ Where to get help...................................................................................................... 2 ◆ How this document is organized ............................................................................... 3 ◆ Related documentation............................................................................................. 3 ◆ Overview................................................................................................................... 4 ◆ VNX5300 Block and File product description............................................................. 6 ◆ System component description............................................................................... 11 ◆ I/O modules............................................................................................................ 46 ◆ Disk-array enclosure................................................................................................ 68 ◆ Cabling ................................................................................................................... 85 ◆ VNX5300 DAE cabling ............................................................................................. 86 EMC® VNX™ Family VNX5300™ Hardware Information Guide P/N 300-013-308 Rev 01 June 25, 2012

EMC® VNX™ Procedure Generator EMC CONFIDENTIAL version: 4.5 1 of 51 Replacing the Data Mover Enclosure (DME) T o p i c VNX5300 Procedures S e l e c t i o n s VNX5300 Activity Type: Hardware Replacements VNX5300 File/Unified HW Replacements: Data Mover Enclosure (DME) Generated: 2013/7/24 11:21:15 SolVe Generator Updated: 五月 30, 2013 IMPORTANT: To be sure you have the latest SolVe generator application and content, always choose Yes when asked if you want to update the application or repository. R E P O R T P R O B L E M S If you find any errors in this procedure or have comments regarding this application, send email to [email protected] Copyright© 2010 – 2013 EMC Corporation. All rights reserved. Publication Date: July, 2013 EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice. THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS.” EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Use, copying, and distribution of any EMC software described in this publication requires an applicable software license. For the most up-to-date regulatory document for your product line, go to the Technical Documentation and Advisories section on EMC Powerlink. For the most up-to-date listing of EMC trademarks, see the list of EMC Corporation Trademarks on EMC.com. All other trademarks used herein are the property of their respective owners.