Epson PowerLite 4300 Manuals

Message Broadcasting 1 Message Broadcasting Message Broadcasting is a plug-in for EasyMP Monitor. Administrators can use the plug-in to send messages or announcements to one or more projectors or all the projectors on the network. You can send messages manually, or use the Timer function in EasyMP Monitor to have messages sent automatically. You can use Message Broadcasting to send images in JPEG format. The maximum resolution for an image is 1920 × 1200 pixels. Getting Started Before you install the Message Broadcasting plug-in, make sure EasyMP Monitor (version 4.40 or later) is installed, and your projectors are registered in EasyMP Monitor. Make sure your projectors support Message Broadcasting; check www.epson.com/support if necessary. Follow the instructions on the Epson website for downloading and installing. You need to use a networked Windows computer running Windows® 7, Windows Vista®, Windows XP, or Windows 2000 Professional to install the plug-in. If any of the projectors you select are switched off, they will power on automatically when you begin Message Broadcasting. For network communication, make sure the Standby Mode setting in the projectors’ Extended menu is set to Communication On.

EasyMP® Monitor Operation Guide Ver.4.50

Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Epson Type of Product: Projector Model: H380A/H348A/H379A Marketing Name: PowerLite 4100/4200W/4300 Epson America, Inc. Limited Warranty Two-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser of the Epson projector product enclosed with this limited warranty statement that the product, if purchased new and operated in the United States, Canada, or Puerto Rico will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase. This limited warranty applies only to the projector and not to the projector lamp, which carries a limited warranty period of ninety (90) days from the date of original purchase. For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: If your product requires service during the limited warranty period, please call Epson at the number on the bottom of this statement and be prepared to provide the model, serial number, and date of original purchase. Epson will, at its option, repair or replace the defective unit, without charge for parts or labor. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. The exchanged product or part may be new or refurbished to the Epson standard of quality, and at Epson's option, the replacement may be another model of like kind and quality. Epson's liability for replacement of the covered product will not exceed the original retail selling price of the covered product. Exchange or replacement products or parts assume the remaining warranty period of the product covered by this limited warranty. If Epson replaces the lamp as part of the warranty service, the replacement lamp carries the limited 90-day warranty stated above. What This Warranty Does Not Cover: This warranty covers only normal use in the United States, Canada or Puerto Rico. Twenty-four hours per day or other excessive continual use is not considered normal use. This warranty does not cover consumables such as filters. This warranty is not transferable. Epson is not responsible for warranty service should the Epson label or logo or the rating label or serial number be removed. Epson is not responsible for warranty service should the product fail to be properly maintained or

INSTALLATIONHANDBOOK Maintenance Epson PowerLite 4100 / 4200W / 4300 1 Cleaning the Air Filter Your projector includes an air flter to ensure the best performance. If dust collects on the air flter (on the side of the projector), you see a message on the screen telling you to clean the flter, or the Temp light fashes green, clean the flter. Dust clogs prevent proper ventilation and can cause overheating, which can damage the projector. note To order replacement air flters, request part number V13H134A17. Follow these steps: 1. Press the P power button on the back of the projector to turn it of. After the projector beeps twice, unplug the power cord. 2. Grip the air flter cover tab and remove the air flter cover as shown. 3. Place your fnger into the groove and remove the air flter as shown.

INSTALLATIONHANDBOOK Remote Control Information Epson PowerLite 4100 / 4200W / 4300 1 Using the Remote Control Make sure batteries are installed. Follow these tips for using the remote control: Point the remote control at the front of the projector or at the screen. Stand within 49 feet (15 meters) of the projector. Controlling the Picture You can use the remote control to preview and select your picture sources, temporarily turn of the picture, freeze the action, and zoom in on the picture. Switching Between Picture Sources If your projector is connected to more than one computer and/or video source, you can switch between the diferent sources: The easiest way to select your source is to press the Search button on the remote control (or the Source Search button on the projector) repeatedly until you see the image you want on the screen. On the remote control, you can press one of the Source buttons to select the connected device you need. After you select a source, the screen goes dark for a moment before the image appears. note If a button is pressed longer than 30 seconds, the remote control stops operating to conserve battery power. When you release the button, normal operation resumes. note Using the remote under bright fuorescent lamps or in direct sunlight may afect projector response.

PowerLite ® 4100/4200W/4300 Quick Reference This Quick Reference card gives brief instructions on connecting your PowerLite projector and using common features. For details, install and view the User’s Guide from the projector’s CD. VGA cable Component-to-VGA cable (optional) Composite video cable (BNC) (optional) Component-to-VGA cable (optional)

PowerLite ® 4100/4200W/4300 Multimedia Projector User’s Guide

PowerLite ® 4300 Multimedia Projector Brilliant quality. Easy installation features. Engineered for easy installation, the PowerLite 4300 offers a flexible solution for any classroom or boardroom. Featuring 5200 lumens of color and white light output1, plus XGA resolution, this powerful performer ensures amazing presentations and provides convenient maintenance features. With one-touch filter removal and easy side lamp access, the PowerLite 4300 offers added peace of mind. It even includes a closed captioning decoder, so there are no added costs to accommodate those with hearing impairments. The PowerLite 4300 is ideal for both executive boardrooms and educational institutions, with value, power and performance for all your presentation needs. Bright performance; brilliant detail — 5200 lumens color and white light output1, XGA resolution Network-ready — RJ-45 LAN connection with monitor and control capabilities Easy installation — horizontal/vertical lens shift, centered lens design, 1.8x zoom lens and Quick Corner® allow for flexible room placement and easy image adjustments at setup