Epson 84PLUS Getting Started Manual

Administrators can use the plug-in to send messages or announcements to one or more projectors or all the projectors on the network. You can send messages manually, or use the Timer function in EasyMP Monitor to have messages sent automatically. You can use Mess ...

from Microsoft® PowerPoint® as .JPG files. 1. After you create a slide or series of slides in PowerPoint, open the File menu and select Save As. 2. For the file type, select JPEG File Interchange Format (*.jpg), then click Save. If you are worki ...

3. Select the projector or group you want to send your message to. 4. Click the File or Folder button, depending on whether you want to broadcast an individual message (File) or a series of slides (Folder). 5. Click Select, then select the file or folder you want to broadcast. You see the file o ...

interrupt the existing projection. 8. When you want to end the message display or slideshow, click End. If you are broadcasting a series of slides, you may need to calculate the end time. Multiply the number of slides by the Update interval between slides, then add the num ...

3. Select the projector or group you want to send your message to. 4. Click Add. You see the Create New Timer window: ...

following: ■ Date—Select the date you want to broadcast. ■ Every Week—Select the start and end dates, and the day or days you want to broadcast. ■ Every Day—Select the start and end dates for the daily broadcast. 6. Select the time you want to start broadcast ...

8. Click the File or Folder button, depending on whether you want to broadcast an individual message (File) or a series of slides (Folder). 9. Click Select, then select the file or folder you want to broadcast. 10. If you are broadcasting a slideshow, you can specify the timing between slides. Select the number o ...

12. To set the message end time, click Add, select the time, then select Message Broadcasting end in the Operation box and click OK. You must set the end time; otherwise, your message broadcast will continue indefinitely. You can use the buttons at the bottom of the screen to enable, ...

following: ■ If the message does not appear on any of the projectors, check the firewall settings on the computer running EasyMP Monitor. Make sure EasyMP Monitor is selected as an exception. ■ If an individual projector fails to display the message, ...