Game ready ATX COOLING VEST Manuals

COOLING VEST USE GUIDE ENGLISH ASSEMBLY The Vest Heat Exchanger fits inside the Vest Sleeve and comes pre-assembled. If the Heat Exchanger is removed to launder the Sleeve or for any other reason, please use the following instructions to re-insert the Heat Exchanger into the Sleeve. WARNING It is mandatory to fully read and understand the Game Ready GRPro 2.1 User Manual before using the device. Failure to follow operating instructions could result in serious injury. IMPORTANT Read complete indications, contraindications, cautions, and warning before using this product. Keep this document for future reference. REMOVAL OF HEAT EXCHANGER 1. Disconnect the Connector Hose from the Cooling Vest 2. Unzip the back zipper 3. Gently pull out the Heat Exchanger STORAGE OF YOUR COOLING VEST Hang your Cooling Vest on a wide hanger or lay flat. Do not fold or stack it, as this could kink the fluid chamber and the Vest will not work properly. Place the Vest Sleeve completely open, flat, with blue side down. Front panels should be pointing away from you as picture shows. 1 Place the Heat Exchanger in the same orientation, with the blue side down. 2 Open the horizontal, back zipper on the Vest Sleeve. Insert the Heat Exchanger into the sleeve, matching the orientation (blue to blue). Make sure the Heat Exchanger is inside the Sleeve with no folds or creases that might block flow of water through the channels of the Heat Exchanger. Close the back zipper. The Cooling Vest is ready to use. 3 FOR USE WITH GAME READY GRPRO® 2.1 SYSTEM SUPERSEDED