Gigabyte GA-6VA7 Manuals

BIOS Configuration 4-1 4. BIOS CONFIGURATION Award's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery- backed CMOS SRAM so that it retains the Setup information when the power is turned off. 4.1. ENTERING SETUP Power ON the computer and press immediately will allow you to enter Setup. If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" bottom on the system case. You may also restart by simultaneously press , , and keys. 4.2. CONTROL KEYS Up arrow Move to previous item Down arrow Move to next item Left arrow Move to the item in the left hand Right arrow Move to the item in the right hand Esc key Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu PgUp key Increase the numeric value or make changes PgDn key Decrease the numeric value or make changes F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 key Change color from total 16 colors F3 key Reserved F4 key Reserved F5 key Restore the previous CMOS value from CMOS, only for Option Page Setup Menu F6 key Load the default CMOS value from BIOS default table, only for Option Page Setup Menu F7 key Load the default F8 key Reserved F9 key Reserved F10 key Save all the CMOS changes, only for Main Menu

R-21-02-000315 6VA7+ USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power on by Keyboard: If your ATX power supply supports larger than 300 mA 5V Stand-By current, you can power on your system by entering password from the Keyboard after setting the “Keyboard power on” jumper (JP1) and password in CMOS Setup. 3. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B) 4. Wake-up on LAN supports(on J7): Your ATX power supply must support larger than 720 mA 5V Stand-By current. 5. Support 3 steps ACPI LED. CeleronTM/ Pentium® !!! Socket 370 Processor MAINBOARD REV. 2.1 Second Edition

R-20-01-000107 6VA7+ USER'S MANUAL 1. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. 2. System power on by Keyboard: If your ATX power supply supports larger than 300 mA 5V Stand-By current, you can power on your system by entering password from the Keyboard after setting the “Keyboard power on” jumper (JP1) and password in CMOS Setup. 3. Support Modem Ring-On. (Include internal Modem and external modem on COM A and COM B) 4. Wake-up on LAN supports(on J7): Your ATX power supply must support larger than 720 mA 5V Stand-By current. 5. Support 3 steps ACPI LED. CeleronTM Socket 370 Processor MAINBOARD