Intel WMIX-D5256 Operation & User’s Manual

any means, without prior written permission of the publisher. All trademarks are the properties of the respective owners. All product specifications are subject to change without prior notice □ WMIX-D5256 □ Driver CD (Include user’s manual) □ 1 x PS2 Y Cable(KB an ...

1.1 Block Diagram ............................................................................................................. 4 1.2 Features ................................................................................... ...

This chapter introduces the product features, jumper and connector information. 1.1 Block Diagram Intel DMI 4 Lanes DDR3 800MHz LPC I/F 82801HBM ICH8M Intel SO-DIMM x2 CK505 SM Bus SM Bus 2 M O C S M & B K LPT SPI SIO_W83627EHG USB 2.0 x8 SATA x2 CF Socket COM1 COM3 COM4 COM5 COM6 SPI UART_ F81216D VGA XC3S200AN DIO ATOM D425/ ...

Processor Intel ATOM D525 1.8 GHz (Dual Core) Chipset ICH8M BIOS AWARD 16Mb SPI Memory Technology Dual DDR3 800 MHz SDRAM Max. Capacity Up to 4GB Socket 1 x SO-DIMM DDR3 Display Chipset Intel D525 integrated refresh of the 3rd generation graphics core VRAM Shared with 224MB system memory Resolution Analog Display: Up ...

USB 2.0 2 COM 3 (RS-232, supply 5V / 12V / RI) Parallel 1 Audio Amplifier 1 [2W(8Ω) stereo] Compact Flash 1 (Bottom Side) Digital IO 8 bit GPIO (4 IN + 4 OUT) Rear I/O PS2 1(1 K/B and 1 Mouse by Y-Cable) VGA 1 COM 3 (RS-232, supply 5V / 12V RI, COM2 RS232/RS422/RS485 Jumper select ...

COM1_COM2 USB1_KBMS VGA_COM3 USB_LAN1 USB_LAN2 DIO1 AUDIO1 AUDIO2 PWR1 CPUFAN1 JCOM2_SEL JCOM1 JCOM2 MCR JCOM3 VGA2 JSPI RT1 LPT PCIE4 USB4 JCF JIDE MINI-PCIE COM4 JCOM4 JCMOS JPWR_SEL SYSFAN1 SATA2 SATA_PWR2 SATA1 SATA_PWR1 JMODE2 JMODE1 JMODE0 LVDS18 LVDS24 INV JCOM5 JCOM6 COM5 COM6 LPC JLVDS SO -DIMM1 16 15 1 2 1 2 10 9 23 24 2 1 1 11 2 7 ...

JCMOS：CMOS Clear Pin No. 1-2 2-3 Function Normal Operation (Default) Clear CMOS Contents Jumper Setting JCOM1 / JCOM2 /JCOM3 / JCOM4 / JCOM5 / JCOM6：(5V/12V/RI) Select Pin No. 1-2 3-4 5-6 Function +5V Modem Ring In (Default) +12V Jumper Setting JCOM2_SEL：COM2 (RS-232/RS-422/RS-485) Select (1/3) Pin No. 5-6, 11-13, 12-14, 19-21, 20- ...

Pin No. 7-8 Function RS-422 TX 100Ω / RS-485 Termination Jumper Setting Note: Not Recommended for RS-422 TX 100Ω Termination JCF: Compact Flash ( Master / Slave ) Select Pin No. 1-2 2-3 Function Master Slave (Default) Jumper Setting 3 2 1 3 2 1 3 2 1 3 2 1 JIDE: IDE ATA Mode Select Pin No. 1-2 2-3 Al ...

Pin No. ATOM D525 Output to XC3S200AM LVDS24 Output JMODE0: 1 JMODE1: 1 JMODE2: 1 3 2 1 JMODE0 JMODE1 JMODE2 3 2 1 JMODE0 JMODE1 JMODE2 Single channel (18 bit) * Default setting, bypass. Support one 48bit dual channel panel (resolution by VBIOS) (48bit: odd 24bit + even 24bit) JMODE0: 0 ...