Gira 0335 00 Manuals

GIRA Info Presence detector extension unit insert Installation Instructions Presence detector extension unit insert 16/02 Page: 1 of 2 System 2000 Presence detector extension unit insert Order No.: 0335 00 Function Presence detector extension unit insert as a 3-wire extension unit (active extension) for presence detectors or automatic switches. The extension unit can only be used in conjunction with the presence detector attachment or automatic switch attachment. Other attachments than those specified do not yield any meaningful functions. In conjunction with the presence detector attachment or the automatic switch attachment unit, the 3- wire extension unit transmits a light-independent switching signal to the main unit when a movement is detected. The locking time of the 3-wire extension unit is approx. 3 secs. The signals are processed in the attachment (presence detector or automatic switch attachment) of the main unit. Inserts that can be used for the main unit: Universal dimmer, LV dimmer Triac-switching insert, Tronic-switching insert Relay insert Note: The extension unit is not suitable for direct switching of loads. The extension unit must not be used in conjunction with more than one main unit. Fitting instructions A The extension unit insert � is installed in a DIN 49073 flush-mounting box (see fig. A). The connection terminals of the insert must be at the bottom (wallmounting). The attachment � is plugged into the insert together with frame �. The electrical contact with the insert is ensured by plug �. B Connection diagram see fig. B. Main unit �. Extension unit �. Further extension units �. Load �.