GRASS VALLEY 8950ADC Manuals

J1 J2 J3 J4 J5 J6 J7 J8 J9 J10 SDI Output SDI Output Not Used Color Black or Composite Sync V/R U/B Loopthru Y/G Ref Loop 8900V-R Remote Timing Generator Analog Filter Micro- processor YUV Converter Mux & 601 Encoder LEDs SDI Delay ADC Gain Y/G U/B V/R Ext Ref Controls Specifications Ordering Information 70 The 8950ADC converts a component analog video signal from analog VTRs and switchers to serial digital, which can then be routed through a digital router or switcher, or stored on a digital video disk recorder. It offers 2.5 horizontal lines of user-controllable delay to adjust the output timing, and inserts EDH code to help track errors downstream. All possible adjustments to this card can be performed directly on the module. When the 8900NET card is installed in the frame, you gain immediate access to remote control and monitoring. Key Features 10-bit A-to-D converter • Special 0:4:4 full-bandwidth chroma output • 4X over-sampling for outstanding • resolution Individual component gain adjustment • EDH insertion • Two lines output phasing • Supports all popular CAV formats • Selective vertical blanking • Passive loop-through reference input, • color black, or composite sync Housed in the same frame with other • 8900-V audio and video modules Supported Frame Types GeckoFlex with 8900V-R GeckoFlex Video rear module, Gecko video frames: 8900TX-V, 8900TF-V, 8900TFN-V Power Rating 7.2 Watts – single slot Input Type: Component analog video Connector: 75Ω BNC terminating Format: RGB, EBU N10, Beta (US), Beta (Japan), MII (US), MII (Japan) Return loss: >40 dB to 5.5 MHz Reference Input Connector: High Z differential loop-through BNC Return loss: >40 dB to 5.5 MHz Output Signal type: SMPTE 259M, 10-bit 4:2:2, 270 Mb/s Number of outputs: Two Connector: 75Ω BNC Return loss: >18 dB to 270 MHz EDH embedded Performance Quantization: 10-bit Internal DSP: 4X over-sampling Frequency response: ±0.1 dB Group delay error: <5 ns Signal-to-noise ratio: >60 dB Output phasing range: Up to 2.5 video lines Phasing increment: 37 ns step Electrical length: 2.5 µs Operating temperature: 0° to 45°C Relative humidity: 0% to 90% non-condensing Indicators and Controls Indicators: • Input video present • Reference present (2: 525, 625) • Fault • Power Front edge controls: • Standard selection • Video gain • Component gain adjustments • Component black level • Input format • Blanking • Output delay Remote: All indicators and controls via frame Ethernet This module can be mounted in a GeckoFlex frame when ordered with the 8900V-R GeckoFlex Video rear. 8950ADC Component video A-to-D converter 8950ADC Component A-to-D Converter For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular