Gronomics Rustic Elevated Garden Bed Manuals

East Bethel, MN USA 763-753-7374 Continued 1 Parts Identifi cation Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. NOTE:Ground preparation is optional, however we recommend leveling area under frame of product, or place product directly on a flat level surface before filling with soil. Rustic Elevated Garden Bed (34” x 48”) Assembly Instruction Item #: REGB 34-48 1 2 3 4 5 6 8 7 ITEM QTY. Parts List 1 4 2 2 PART # 3200E R4502 Corner Post, 4” x 4” x 32” w/12-3/4” Dovetail Depth Side Rail w/Cleat, 45” x 5-1/2” x 1” 3 2 R4500, R4500L Side Rail (one w/Logo), 45” x 5-1/2” x 1” 4 4 5 2 6 6 7 4 R3100 3178N 3178 4545 Side Rail, 31" x 5-1/2” x 1” Corner Notched Bottom Board, 31-7/8” x 5-1/2” x 1” Bottom Board, 31-7/8” x 5-1/2” x 1” Post Cap, 4” x 4” x 1-1/2” 8 1 FL3652 Fabric Liner, 36” x 52” Side Rail Assembly 2 Stand two 4” x 4” X 30” corner posts (Item 1) upright with slots facing you and slots facing each corner post. Locate a 45” x 5-1/2” side rail w/cleat (Item 2). With cleat located at the bottom and facing you, install side rail w/cleat into the slots and slide down to the bottom of the slots. Repeat procedure for the two remaining corner posts and 45” x 5-1/2” side rail w/cleat. (Soil depth option: Cleats located as shown will provide a soil depth of approximately 9”. Reverse side rail w/ cleat installation, cleats located at top, if a soil depth of approximately 6” is desired). 2 Cleat 1 1 Packaged & Inspected by: Date: DESCRIPTION Product Care and Maintenance Western Red Cedar will turn a weathered grey if left unfinished. Although no finish is required for cedar when used outdoors, a natural oil finish applied regularly will help maintain the beauty aned minimize cracking and drying. It is recommended to use Gronomics Garden Bed Oil (Item# GBO-1Q), a non-toxic, food safe finish that is very easy to apply. Apply oil when air and wind temperatures are between 50-90 degrees. Avoid applying in direct sunlight.