Guardzilla 360 Outdoor Manuals

USING THE MONITOR The monitor on your Guardzilla app provides the ability to access a live, 360 degree video feed of your entire monitored area, broadcast into the area, listen in, take photographs and sound the siren. It also provides the access to all of your settings, recorded motion detection events, snapshots, and actions. 1 Before accessing your monitor make sure your phone app is connected to your Guardzilla unit. Observe the word next to the lock icon on the monitor screen. If it says “Connecting” the camera is not yet connected. When it says “Disarmed” or “Armed” the camera is ready. .2 To access live video press the video image on your screen. To get a 360 degree view of the entire monitored area swipe your finger in the direction you want to view OR move the phone in the desired viewing direction and the live video feed will move. To zoom in (or out) on an image place to fingers on the screen and move them closer together (to zoom in) or farther apart (to zoom out). www.guardzilla.com Guardzilla is a registered trademark of Practecol, LLC iPhone is a registered trademark of Apple Inc. Guardzilla 360 Outdoor .3 To get a full screen view of your area, rotate your phone horizontally. Rotate it back to return to the original screen.

FACTORY RE-SETTING AND POWER CYCLING YOUR GUARDZILLA CAMERA ______________________________________________________________ Guardzilla 360 Outdoor This guide describes how to: 1) Factory reset your camera; and 2) Power cycle your camera. Power cycling your camera will retain all your settings. It’s a good first step if you are experiencing issues with your camera. A factory reset of your camera will remove all of your camera’s settings and will require you to set up your camera all over again. ______________________________________________________________ FACTORY RE-SETTING YOUR CAMERA 1 Make sure that your camera is on. IF the status LED light on the top of the camera is off, press the power button to activate the camera. .2 Locate the power button on the side of the camera. .3 Press down and hold the power button while watching the LED light on the top of the camera until it begins to blink red and blue, then release the button. Your camera will now go through the factory reset process. In a few seconds the camera will announce that “Guardzilla 360 is initialized”. Your camera is reset and can now be added back onto your network (see STEP 4 below), if desired.

SETUP GUIDE Follow these step-by-step directions to set up your new Guardzilla camera. Protecting and monitoring your environment is only minutes away. Go to www.guardzilla.com/support for more information on your new Guardzilla camera. 1 Go to the Apple App Store or Google Play Store and download the Guardzilla app. Once downloaded, launch the app. .2 A carousel of product images will appear. Swipe your finger on the product images until the 360o Outdoor Live Video Security Camera image and description appear, then select Next. www.guardzilla.com Guardzilla is a registered trademark of Practecol, LLC iPhone is a registered trademark of Apple Inc. Guardzilla 360 Outdoor .3 Plug in your Guardzilla 360 Outdoor camera or charge the internal rechargeable batteries, if necessary. Select Next.