Hioki 3274 Manuals

EN 3275 CLAMP ON PROBE 3274 Instruction Manual May 2015 Revised edition 5 3275A981-05 15-05H 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com Contents Introduction 1 Inspection 1 Notes on Safety 1 Notes on Use 4 Chapter 1 Overview 9 1.1 Product Overview 9 1.2 Features 9 1.3 Names of Parts 10 1.4 Parts of the Sensor 11 Chapter 2 Specifications 13 2.1 Product Specifications 13 2.2 Standards Applying 15 Chapter 3 Measurement Procedure 19 3.1 Notes on Use 19 3.2 Preparations for Measurement 20 3.3 Demagnetizing and Zero Adjustment 21 3.4 Measurement Procedure 22 3275A981-05 1 ___________________________________________________________________ ___________________________________________________________________ WARNING This device is designed to comply with IEC 61010 Safety Standards, and has been thoroughly tested for safety prior to shipment. However, mishandling during use could result in injury or death, as well as damage to the device. Be certain that you understand the instructions and precautions in the manual before use. We disclaim any responsibility for accidents or injuries not resulting directly from device defects. Introduction Inspection Notes on Safety Thank you for purchasing this HIOKI 3274, 3275 CLAMP ON PROBE. To obtain maximum performance from the device, please read this manual first, and keep it handy for future reference. When you receive the device, inspect it carefully to ensure that no damage occurred during shipping. If damage is evident, or if it fails to operate according to the specifications, contact your dealer or Hioki representative. Supplied accessories Instruction manual 1 Carrying case 1

INSTRUCTION MANUAL For...は専用機種。複数の場合は「/」で区切る。 不要の場合はとる。 形名を入力。　複数の場合は「/」で区切る。 3274 品名を入力。 CLAMP ON PROBE Contents Introduction 1 Inspection 1 Notes on Safety 1 Notes on Use 4 Chapter 1 Overview 9 1.1 Product Overview 9 1.2 Features 9 1.3 Names of Parts 10 1.4 Parts of the Sensor 11 Chapter 2 Specifications 13 2.1 Product Specifications 13 2.2 Standards Applying 14 Chapter 3 Measurement Procedure 17 3.1 Notes on Use 17 3.2 Preparations for Measurement 20 3.3 Demagnetizing and Zero Adjustment 21 3.4 Measurement Procedure 22